Ventev TW-HD-MOUNT502 manual

Ventev TW-HD-MOUNT502
7.8 · 1
PDF manual
 · 4 pages
English
manualVentev TW-HD-MOUNT502
www.Ventev.com/Infra sales@ventev.com 800-851-4965

Co-Location Mount for Cisco Access Points

Figure 2
2. In Figure 2, locate the four circled Access Point Mounting Holes on the Access Point Mounting
Plate.
3. Place the Access Point Mounting Plate at against the mounting surface. Mark the location of the
four Mounting Holes on the mounting surface.
4. Remove the Access Point Mounting Plate from the mounting surface.
5. Drill holes at the four marked locations.
6. Optional Step for Dry Wall Mounting: Insert the four wall anchors into the four drilled holes until the
anchors are ush with the wall surface.
7. Place the Access Point Mounting Plate at against the mounting surface so that the four drilled
holes are visible through the four Mounting Holes.
8. Put washers around screws or bolts, as appropriate.
9. Insert a bolt or screw through the rst Mounting Hole and screw into place until the screw is tight.
Repeat for the three remaining Mounting Holes. The Co-Locating Mount is now secured to the
mounting surface.

Installation Instructions (continued)

Manual

View the manual for the Ventev TW-HD-MOUNT502 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Ventev TW-HD-MOUNT502 or do you need help? Ask your question here

Need help?

Do you have a question about the Ventev and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ventev TW-HD-MOUNT502 specifications

Below you will find the product specifications and the manual specifications of the Ventev TW-HD-MOUNT502.

General
BrandVentev
ModelTW-HD-MOUNT502 | TW-HD-MOUNT502
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product typeWLAN access point mount
Product colorWhite
CompatibilityCisco AP 2700e, 3602e, 3702e, AIR-ANT2566P4W-R.
MaterialAluminum
Packaging data
Quantity per pack- pc(s)
Weight & dimensions
Weight1000 g
Width253 mm
Depth242 mm
Height116 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ventev TW-HD-MOUNT502 below.

What is the weight of the Ventev TW-HD-MOUNT502?

The Ventev TW-HD-MOUNT502 has a weight of 1000 g.

What is the height of the Ventev TW-HD-MOUNT502?

The Ventev TW-HD-MOUNT502 has a height of 116 mm.

What is the width of the Ventev TW-HD-MOUNT502?

The Ventev TW-HD-MOUNT502 has a width of 253 mm.

What is the depth of the Ventev TW-HD-MOUNT502?

The Ventev TW-HD-MOUNT502 has a depth of 242 mm.

Is the manual of the Ventev TW-HD-MOUNT502 available in English?

Yes, the manual of the Ventev TW-HD-MOUNT502 is available in English .

Is your question not listed? Ask your question here

No results