View the manual for the Velda Laser Guard here, for free. This manual comes under the category not categorized and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Velda Laser Guard or do you need help? Ask your question here
| Brand | Velda |
| Model | Laser Guard | 1471672658 |
| Product | not categorized |
| EAN | 8711921249950 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Velda Laser Guard below.
To ensure a durable and dry connection to the electric mains for the Velda Laser Guard, follow these steps: 1. Make sure to use an earth leakage circuit breaker with a nominal 30 mA to protect the device and prevent electrical accidents. 2. Ensure that the connection to the electric mains is secure and properly insulated to prevent any moisture from entering the system. 3. Use a transformer that is specifically designed for the Velda Laser Guard and follow the manufacturer's instructions for proper installation. 4. Check the condition of the device, transformer, and cable regularly. If any damage is detected, discontinue use and replace the faulty components. 5. When not in use or during maintenance activities around the pond, it is recommended to unplug all electrical pond apparatuses, including the Laser Guard, to prevent any accidents or damage. 6. Position the Laser Guard upright next to the pond as intended by the manufacturer. Using it for any other purpose is prohibited. 7. Remember that Velda provides a 24-month guarantee for the correct functioning of the Laser Guard. Keep the dated receipt for warranty claims. By following these steps, you can ensure a durable and dry connection to the electric mains for your Velda Laser Guard without compromising safety or performance.
If the LED indicator lights on the Velda Laser Guard are not working, you can follow these steps to troubleshoot the issue: 1. Check the power supply: Ensure that the Laser Guard is properly connected to a power source and that the power supply is functioning correctly. Make sure the transformer is plugged in securely and that there are no loose connections. 2. Clean the sensor: Regularly clean the sensor to ensure optimal functioning of the device. Use a soft cloth or brush to remove any dirt or debris that may be obstructing the sensor. 3. Calibrate the sensor: If the Laser Guard does not respond to movement within the detection area, you may need to calibrate the sensor. Unplug the apparatus and wait for 1 minute before plugging it back in. This will reset the sensor and may resolve any calibration issues. 4. Check for obstructions: Ensure that there are no large branches or moving plants in the detection area of the device. These obstructions can trigger false alarms or prevent the LED indicator lights from functioning properly. 5. Safety precautions: Do not point the unit at people and draw attention to the installed Laser Guard, especially for children. The Laser Guard is safe for people and animals, but it should be used responsibly. If the issue persists after following these steps, please refer to the manufacturer's warranty card for further assistance.
The Velda Laser Guard may not be detecting any movement due to several reasons. Here are the steps to troubleshoot the issue: 1. Check the settings: Ensure that the Laser Guard is set to the "ON" or "MUTE" mode. The LED indicator should be continuously lit when the device is ready to detect movement. 2. Clean the sensor: Regularly clean the sensor to optimize its functioning. Use a soft cloth or brush to remove any dirt or debris that may be obstructing the sensor's view. 3. Calibrate the sensor: If the Laser Guard does not respond to movement within its detection area, try calibrating the sensor. Unplug the device and wait for 1 minute before plugging it back in. This will reset the sensor and may resolve any calibration issues. 4. Check for obstructions: Ensure that there are no large branches or moving plants within the detection area of the device. These obstructions can interfere with the sensor's ability to detect movement. 5. Avoid pointing the unit at people: The Laser Guard is designed to deter animals, not humans. Make sure the device is not pointed directly at people, especially children. It is safe for people and animals, but it may cause a shock reaction. 6. Ensure proper installation: The Laser Guard should be placed upright next to the pond. Any other use is forbidden by the manufacturer. Ensure a durable and dry connection to the electric mains and use an earth leakage circuit breaker for safety. By following these steps, you should be able to troubleshoot and resolve any issues with the Velda Laser Guard not detecting movement.
Yes, the manual of the Velda Laser Guard is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Velda and is the answer not in the manual?
Question and answer
Number of questions: 1How can I make my laser guard work the same at night as in the daytime