Vaddio RoboSHOT 12E HDBT manual

Vaddio RoboSHOT 12E HDBT
6.8 · 1
PDF manual
 · 140 pages
English
manualVaddio RoboSHOT 12E HDBT
To work with items on other menus:
1. Turn the knob to navigate from the home menu to
the item you need to change. The @ symbol
indicates the menu item to which you have
navigated.
2. Press the Select button to change the menu knob
to adjustment mode. The @ symbol changes to a
> symbol.
3. Turn the menu knob to adjust the selected item.
4. When the item is adjusted properly, do one of
these things:
o
Press the Cancel button to put the menu knob
back into navigation mode. This will not set the
menu item back to its previous value.
o
Do nothing. After a few seconds, the display
blinks once to indicate that the Menu knob has
returned to navigation mode.
Available adjustments include:
n Shutter Set the shutter speed. Range is 1 to
10000. This cannot be adjusted when Iris is in
auto mode.
n NR (Noise Reduction) Range is 0 through 5.
n Wide Dynamic Range (WDR) On or Off. This
cannot be enabled when Iris is in manual mode,
nor can it be enabled when Backlight Compensation is enabled. The next three items are WDR
adjustments.
o
Display Brightness Level Range is 0 (dark) through 6 (bright).
o
Brightness Compensation Range is 0 (dark) through 3 (bright).
o
Compensation Level Range is 0 (low) through 2 (high).
n Skew If the cables from the Universal CCU to the camera are not all the same length, video quality
may be reduced. Change the skew setting to compensate for the difference in cable length. The
optimum setting is usually in the middle of the range of skew values which pass acceptable video.
Range is 1 through 16.
n HDMI Set the HDMIcolor space. Default is YCrCb; sRGB is also available.
n Y-Gain Adjust the video ±10 IRE at all outputs as needed for associated video equipment.
n Scene Config Navigate through the six factory-defined CCU scenes, or press one of the three
Scenes buttons to select a custom scene. If the selected custom scene has not been defined on the
camera, the Universal CCU presents a message saying there is no such scene, and reverts to the
default scene (Auto).
83
Complete Manual for RoboSHOT CAT-5 Professional PTZ Camera Systems

Manual

View the manual for the Vaddio RoboSHOT 12E HDBT here, for free. This manual comes under the category video conferencing systems and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Vaddio RoboSHOT 12E HDBT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Vaddio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Vaddio RoboSHOT 12E HDBT specifications

Below you will find the product specifications and the manual specifications of the Vaddio RoboSHOT 12E HDBT.

General
BrandVaddio
ModelRoboSHOT 12E HDBT | 999-99600-000W
Productvideo conferencing system
EAN0840077504083
LanguageEnglish
FiletypeUser manual (PDF)
Camera
Megapixel8.57 MP
Sensor typeCMOS
Optical sensor size1/2.5 "
Effective sensor resolution8.51 MP
Optical zoom12 x
Focal length range4.4 - 88.4 mm
Horizontal field of view (wide)70.2 °
Horizontal field of view (tele)4.1 °
Minimum illumination1.6 lx
White balanceATW, Auto, Indoor, Manual, One push, Outdoor
Auto focusing (AF) modesOne Push Trigger
Signal-to-Noise Ratio (SNR)50 dB
Focus adjustmentAuto/Manual
Closest focusing distance0.08 m
Wide Dynamic Range (WDR)Yes
Back Light Compensation (BLC)Yes
Number of camera presets17
Aperture number of steps16
Gain control typeAuto/Manual
Aspect ratio3:2, 4:3, 16:9
PTZ controlYes
Aperture range (F-F)2 - 3.8
Slowest camera shutter speed1 s
Fastest camera shutter speed1/10000 s
Power
Power source typePoE
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Audio
Noise reductionYes
Network
Network streamingYes
Video
Maximum video resolution1920 x 1080 pixels
Supported video modes720p, 1080i, 1080p
Maximum frame rate60 fps
HD typeFull HD
Video formats supportedH.264
Design
Product colorWhite
Mounting typeStand
Tilt angle range-30 - 90 °
Pan range-160 - 160 °
Web-based managementYes
Tilt speed (min)0.35 °/sec
Tilt speed (max)120 °/sec
Pan speed (min)0.35 °/sec
Pan speed (max)120 °/sec
Ports & interfaces
HDMI ports quantity1
Power over Ethernet plus (PoE+) ports quantity1
RS-232 ports1
Weight & dimensions
Width179.1 mm
Depth171.5 mm
Height176.3 mm
Weight2200 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Vaddio RoboSHOT 12E HDBT below.

What is the weight of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a weight of 2200 g.

What is the height of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a height of 176.3 mm.

What is the width of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a width of 179.1 mm.

What is the depth of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a depth of 171.5 mm.

Is the manual of the Vaddio RoboSHOT 12E HDBT available in English?

Yes, the manual of the Vaddio RoboSHOT 12E HDBT is available in English .

Is your question not listed? Ask your question here

No results