Vaddio RoboSHOT 12E HDBT manual

Vaddio RoboSHOT 12E HDBT
6.8 · 1
PDF manual
 · 140 pages
English
manualVaddio RoboSHOT 12E HDBT

Installing the Camera

Be sure you have already set the camera's switches.
If you are installing the camera with a Quick-Connect USB or Quick-Connect USB Mini on a network that
uses static IP addressing (a non-DHCP network), be sure you have already configured the camera
appropriately for the network.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
1. Route the cables to the camera location.
2. Route the cables through the mount, and install the mount on the wall or attach it to the wall box. Leave
the screws loose enough to adjust the position of the mount.
3. Level the mount and tighten the mounting screws.
4. Connect the cables to the camera.
o
If using a Quick-Connect Universal CCU, connect the 36 VDC To Camera output to the camera's
36 VDC From QCCUOnly port.
o
If connecting the camera to any other Quick-Connect device or to an AV Bridge Matrix Pro, connect
power to the EZ Power Video port.
Be sure to connect the cables correctly. Connecting a cable to the wrong port could damage the camera
and void the warranty.
5. Place the camera on the mount.
6. Attach the camera to the mount using the ¼”-20 x .375 mounting screw supplied with the camera.
Images for illustration only; not to scale. Camera and mount details may differ.
37
Complete Manual for RoboSHOT CAT-5 Professional PTZ Camera Systems

Manual

View the manual for the Vaddio RoboSHOT 12E HDBT here, for free. This manual comes under the category video conferencing systems and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Vaddio RoboSHOT 12E HDBT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Vaddio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Vaddio RoboSHOT 12E HDBT specifications

Below you will find the product specifications and the manual specifications of the Vaddio RoboSHOT 12E HDBT.

General
BrandVaddio
ModelRoboSHOT 12E HDBT | 999-99600-000W
Productvideo conferencing system
EAN0840077504083
LanguageEnglish
FiletypeUser manual (PDF)
Camera
Megapixel8.57 MP
Sensor typeCMOS
Optical sensor size1/2.5 "
Effective sensor resolution8.51 MP
Optical zoom12 x
Focal length range4.4 - 88.4 mm
Horizontal field of view (wide)70.2 °
Horizontal field of view (tele)4.1 °
Minimum illumination1.6 lx
White balanceATW, Auto, Indoor, Manual, One push, Outdoor
Auto focusing (AF) modesOne Push Trigger
Signal-to-Noise Ratio (SNR)50 dB
Focus adjustmentAuto/Manual
Closest focusing distance0.08 m
Wide Dynamic Range (WDR)Yes
Back Light Compensation (BLC)Yes
Number of camera presets17
Aperture number of steps16
Gain control typeAuto/Manual
Aspect ratio3:2, 4:3, 16:9
PTZ controlYes
Aperture range (F-F)2 - 3.8
Slowest camera shutter speed1 s
Fastest camera shutter speed1/10000 s
Power
Power source typePoE
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Audio
Noise reductionYes
Network
Network streamingYes
Video
Maximum video resolution1920 x 1080 pixels
Supported video modes720p, 1080i, 1080p
Maximum frame rate60 fps
HD typeFull HD
Video formats supportedH.264
Design
Product colorWhite
Mounting typeStand
Tilt angle range-30 - 90 °
Pan range-160 - 160 °
Web-based managementYes
Tilt speed (min)0.35 °/sec
Tilt speed (max)120 °/sec
Pan speed (min)0.35 °/sec
Pan speed (max)120 °/sec
Ports & interfaces
HDMI ports quantity1
Power over Ethernet plus (PoE+) ports quantity1
RS-232 ports1
Weight & dimensions
Width179.1 mm
Depth171.5 mm
Height176.3 mm
Weight2200 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Vaddio RoboSHOT 12E HDBT below.

What is the weight of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a weight of 2200 g.

What is the height of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a height of 176.3 mm.

What is the width of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a width of 179.1 mm.

What is the depth of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a depth of 171.5 mm.

Is the manual of the Vaddio RoboSHOT 12E HDBT available in English?

Yes, the manual of the Vaddio RoboSHOT 12E HDBT is available in English .

Is your question not listed? Ask your question here

No results