Vaddio RoboSHOT 12E HDBT manual

Vaddio RoboSHOT 12E HDBT
6.8 · 1
PDF manual
 · 140 pages
English
manualVaddio RoboSHOT 12E HDBT
Back panel features:
n Power input Connect only the 36 VDC, 2.78 Amp power supply provided with the Universal CCU.
n Recessed white button Press to execute a factory reset; press and hold to enter boot loader mode.
n 36 VDC to Camera (red) Power to the RoboSHOT camera. Connect to the camera's port marked 36
VDC for CCU Only (color coded red). See Back of the Camera.
Caution
Connect this port ONLY to the camera port marked 36 VDC for CCU Only and color-coded red.
Connecting this port to any other port on the camera will result in equipment damage, and will void the
warranty.
n RS-232 In (grey) Control from an external device. If the camera and CCU will be controlled using a
ProductionVIEW console or other camera control system, connect it to this port. Daisy-chain topology
is not supported.
n RS-232 to Camera (blue) Camera control. Connect to the camera's RS-232 port.
n Local Install the 2-pin 5.0 mm Euro-style connector to use the tally function. In a multi-camera CCU
installation, this lights the blue indicator on the front panel when this camera and Universal CCU
combination is the live program. A tally command is also sent to the RoboSHOT camera via RS-232,
illuminating its front indicator.
n 8-position DIP switch The DIP switch lets you configure the way the camera and Universal CCU
behave. The default position for all switches is DOWN. (Note that the default position for the DIP
switch on the camera is all UP.)
o
Switch 1: UP to load Scene A on power-up or reboot.
o
Switch 5: UP to access adjustments for the display on the front panel.
n Video from Camera (yellow and orange) Receives the camera’s differential video signals from the
camera’s EZ-POWER VIDEO connection.
n HD Video Outputs The Universal CCU provides simultaneous video output in three formats, at the
same resolution as the video input:
o
HD YPbPr Resolution/frame rate up to 1080p/60
o
HDMI Resolution/frame rate up to 1080p/60
o
HD-SDI 3Gb/s Single Link 1080p/60 HD-SDI
20
Complete Manual for RoboSHOT CAT-5 Professional PTZ Camera Systems

Manual

View the manual for the Vaddio RoboSHOT 12E HDBT here, for free. This manual comes under the category video conferencing systems and has been rated by 1 people with an average of a 6.8. This manual is available in the following languages: English. Do you have a question about the Vaddio RoboSHOT 12E HDBT or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Vaddio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Vaddio RoboSHOT 12E HDBT specifications

Below you will find the product specifications and the manual specifications of the Vaddio RoboSHOT 12E HDBT.

General
BrandVaddio
ModelRoboSHOT 12E HDBT | 999-99600-000W
Productvideo conferencing system
EAN0840077504083
LanguageEnglish
FiletypeUser manual (PDF)
Camera
Megapixel8.57 MP
Sensor typeCMOS
Optical sensor size1/2.5 "
Effective sensor resolution8.51 MP
Optical zoom12 x
Focal length range4.4 - 88.4 mm
Horizontal field of view (wide)70.2 °
Horizontal field of view (tele)4.1 °
Minimum illumination1.6 lx
White balanceATW, Auto, Indoor, Manual, One push, Outdoor
Auto focusing (AF) modesOne Push Trigger
Signal-to-Noise Ratio (SNR)50 dB
Focus adjustmentAuto/Manual
Closest focusing distance0.08 m
Wide Dynamic Range (WDR)Yes
Back Light Compensation (BLC)Yes
Number of camera presets17
Aperture number of steps16
Gain control typeAuto/Manual
Aspect ratio3:2, 4:3, 16:9
PTZ controlYes
Aperture range (F-F)2 - 3.8
Slowest camera shutter speed1 s
Fastest camera shutter speed1/10000 s
Power
Power source typePoE
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Audio
Noise reductionYes
Network
Network streamingYes
Video
Maximum video resolution1920 x 1080 pixels
Supported video modes720p, 1080i, 1080p
Maximum frame rate60 fps
HD typeFull HD
Video formats supportedH.264
Design
Product colorWhite
Mounting typeStand
Tilt angle range-30 - 90 °
Pan range-160 - 160 °
Web-based managementYes
Tilt speed (min)0.35 °/sec
Tilt speed (max)120 °/sec
Pan speed (min)0.35 °/sec
Pan speed (max)120 °/sec
Ports & interfaces
HDMI ports quantity1
Power over Ethernet plus (PoE+) ports quantity1
RS-232 ports1
Weight & dimensions
Width179.1 mm
Depth171.5 mm
Height176.3 mm
Weight2200 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Vaddio RoboSHOT 12E HDBT below.

What is the weight of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a weight of 2200 g.

What is the height of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a height of 176.3 mm.

What is the width of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a width of 179.1 mm.

What is the depth of the Vaddio RoboSHOT 12E HDBT?

The Vaddio RoboSHOT 12E HDBT has a depth of 171.5 mm.

Is the manual of the Vaddio RoboSHOT 12E HDBT available in English?

Yes, the manual of the Vaddio RoboSHOT 12E HDBT is available in English .

Is your question not listed? Ask your question here

No results