Uniden DXAI 8580 manual

Uniden DXAI 8580
9.5 · 1
PDF manual
 · 16 pages
English
manualUniden DXAI 8580
Sheet 5
Using the handset menu
To open the handset menu, press and hold [cid/menu] for two
seconds.
The arrow pointer on the left side of the line shows which menu item is
currently highlighted. Use [ / ] to move the pointer up and [ ]
to move the pointer down.
If the phone beeps and stays on the same line, it means you have
reached the top or bottom of the list.
Press [select/channel] to rotate through the available options for the
highlighted menu item.
Press [END] to exit the menu.
Note: You can nd detailed information on the handset menu in section 3
on Setting Up Your Phone and section 4 on Using Your Phone.
(HS1 display)

Ringer :Type A

Ring. Vol.:High

Auto Talk :Off

CIDCW :On

Area Code :

Dial :Tone

Language :Eng

(HS1 display)

Ringer :Type A

Ring. Vol.:High

Auto Talk :Off

CIDCW :On

Area Code :

Dial :Tone

Language :Eng

2-4. Parts of the Base

Note: For information on the base menu, see section 7 on Using Your Answering system.
vol/select/ key
(volume/select/up)
vol/select/ key
(volume/select/down)
key (delete)
menu/clock key
set key
key (skip)
Speaker
key (play/stop)
ringer key
find hs key
memo key
Message counter LED
greet key
charge/in use LED
Charging contacts key (repeat)
key
(answering sysytem on/off)
vol/select/ key
(volume/select/up)
vol/select/ key
(volume/select/down)
key (delete)
menu/clock key
set key
key (skip)
Speaker
key (play/stop)
ringer key
find hs key
memo key
Message counter LED
greet key
charge/in use LED
Charging contacts key (repeat)
key
(answering sysytem on/off)
You might change two handset-specic options --ringer type and ringer volume -- and one base setting –
ringer volume --more often, depending on the situation. Theres another option, area code, that you should only
set if you can use seven-digit dialing (see section 5-3 on Using Seven Digits Instead of Ten).

3-1. System Options (from HS1 only)

These options can only be changed from handset 1 (HS1). After changing these settings, you must put HS 1
back in the base cradle to activate them.
Changing from tone to pulse dialing (DIAL)
Your phone can communicate with the telephone network in two dierent ways: tone dialing or pulse dialing.
These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone
dialing.
If your phone company uses pulse dialing, you need to change your phones dial settings. If you don't get a dial
tone or can't connect to the telephone network, follow the steps below to modify your phone’s settings:
Make sure you have Handset 1 (HS 1).
With the phone in standby, press and hold [cid/menu].
Press [ ] to move the pointer to DIAL.
Press [select/channel] to set the phone to pulse dialing.
Press [END] and put the handset back in the base. Handset 1 communicates the new setting to the
base, and the base activates the setting on any other handsets.
Note: If you use pulse dialing and you need to send DTMF tones during a call (if you're using an automated
response system, for example), press [ /tone/ ] to temporarily switch to tone dialing. When the call
ends, the phone automatically returns to pulse dialing mode.
Activating Caller ID on Call Waiting (CIDCW)
You must subscribe to Caller ID service through your local telephone provider to use this feature.
Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on
Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line.
Make sure you have Handset 1 (HS 1).
With the phone in standby, press and hold [cid/menu].
Press [ ] to move the pointer to CIDCW.
Press [select/channel] to toggle and turn on Caller ID on Call Waiting.
Press [END] and put the handset back in the base. Handset 1 communicates the new setting to the
base, and the base activates the setting on any other handsets.

3-2. Handset-specic Options

These options can be set dierently on each handset. You can also set these options while another handset is
using the phone.
Setting the display language (LANGUAGE)
The handset menus can use English (ENG, default), French (FR) or Spanish (ESP).
With the phone in standby, press and hold [cid/menu].
Press [ ] to move the pointer to LANGUAGE.
Press [select/channel] to select ENG, FR. or ESP.
When the display shows the language you want, use [ / ] and [ ] to move the pointer to another
menu item.
OR
If youre nished, press [END] to return the handset to standby.
Note: To change the language used by the answering system, see Section 7-1 on Setting Up the Answering
System.
1)
2)
3)
4)
5)
1)
2)
3)
4)
5)
1)
2)
3)
4)

3) Setting Up Your Phone

Your phone has four basic options that you need to set up rst. You should only have to set these options once,
and you may not have to change any of them:
Dial mode (tone or pulse dialing)
CIDCW (Caller ID on Call Waiting)
Language
Auto talk

Manual

View the manual for the Uniden DXAI 8580 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Uniden DXAI 8580 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Uniden and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Uniden DXAI 8580 specifications

Below you will find the product specifications and the manual specifications of the Uniden DXAI 8580.

General
BrandUniden
ModelDXAI 8580
Productphone
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Uniden DXAI 8580 below.

Is the manual of the Uniden DXAI 8580 available in English?

Yes, the manual of the Uniden DXAI 8580 is available in English .

Is your question not listed? Ask your question here

No results