Umidigi Uwake manual

Umidigi Uwake
9 · 1
PDF manual
 · 6 pages
English
manualUmidigi Uwake

Sleep Aid Function

Before starting the sleep aid function, you need to disconnect Uwake from
other connected devices.
1. Turn on and off sleep aid function
Long touch the icon to turn the sleep aid function on or off (the sleep
aid time defaults to the previous setting)
2. Sleep Aid Time Setting
After the sleep aid function is activated, the sleep aid light is illuminated, the
white noise music sounds, and the middle of the clock “ : ” stops flashing.
Sleep aid time setting: short press the sleep touch icon, you can choose 15
minutes, 30 minutes, 60 minutes of sleep aid time, select OFF will exit the
sleep aid settings.
3. Sleep Aid Music and Volume Settings
In the sleep aid mode, short press the +/- button to switch 6 kinds of white
noise music; long press the +/- button to adjust the sleep music volume
(12 levels); short press the power button to play or pause. when the set
sleep aid time is over, the light is off, the music stops playing, and the clock
“:” returns to normal flashing.

Alarm Mode

Time setting

1. Short press for 3 seconds to select the 12 hour/24 hour format;
2. Press and hold “ ” for 3 seconds and “Hour” will flash. Then click “ ”,
you can choose to adjust “hour” or “minute”, then press +/- button to adjust
“hour” or “minute” (long press +/- to quickly adjust the value);
3. Press and hold " " for 3 seconds or 5 seconds without any operation, you
can set the time and exit time setting.
Special tip: During the setting of the alarm, you should avoid touching the
speaker net or pressing other buttons, otherwise you will not be able to set the
time.

Warranty

1. The warranty period is 1 year since the acquisition date.
2. During the warranty period, if there are any problems or malfunction about
this product in the case of normal use and maintenance, after verification,
we will provide free repair and component replacement.
The following situations are not included in the warranty:
1. Devices, components are beyond the warranty period.
2.Damage caused by abnormal use such as any use, maintenance or wrong
installation not according to the requirements of the product manual.
3.Damage caused by accidents or man-made reasons (Error in operation,
scratch, transfer, bump, inappropriate voltage, and current input, etc)

Product Specification

Product Name: UMIDIG Uwake Music Wake Up Light
Product Model: Uwake
Product Size: 123 × 123 × 118mm
Built-in Battery: 1800mAh
Output Power: 5W
Frequency Response: 80Hz-20kHz
Signal to Noise Ratio: ≥85dB
Communication Distance: about 10 meters (no obstacles)

Precautions

If the finger touches the “speaker net” for a long time (5S or more), the
screen will prompt “Err-”
Special note: In the white noise sleep mode, after Uwake successfully
connects to the wireless device, the sleep aid music will stop playing.
Disconnect the Wireless connection and press the power button
briefly to restart the sleep aid music.

Speaker Mode

1. Connect to Wireless device
Make sure Uwake is turned on and within the scope of the search,
turn on your Wireless and search for "Uwake". When your device is
successfully connected, an indicator sound will be emitted, the
Wireless icon will be on constantly (in the Wireless connection state,
short press the “ M ” button to disconnect).
2. Control Music Playback
When your device is in music mode, short press “ ” to play
orpause, long press “+ ” for 3 seconds to increase the volume, long
press “-” for 3 seconds to decrease the volume. The maximum volume
level of music is V16. . Short press "" to the next song, short press "-"
to the previous track.
Special note: If no device is connected to Uwake, the Wireless symbol
will stop flashing after 3 minutes and go out.

Light settings

You can select the light mode by touching the “speaker net” with your finger.
CL01-CL07 is the colorful light; CL08 is the gradient light, CL09 is the
automatic mode. In this mode, the light can automatically flash with the
music rhythm. Press and hold th"speaker net” for 3 seconds. The clock
turns off the light. Press and hold for 3 seconds to select 3 different light
brightness.

Special tip:

(1)The light will automatically turn off after 9 hours without any operation.
(2) If the finger touches the “speaker net” for a long time (more than 5
seconds), the screen will prompt “Err-”.

Set alarm time

1.Press and hold “ ” for 3 seconds to enter the alarm setting mode, “Hour”
will flash;
2.Then click “ ”, you can choose to adjust “hour” or “minute”, then press the
/- button to set the value of “hour” or “minute” (long press /- to quickly adjust
the value)
3.Press and hold " " for 3 seconds or 5 seconds without any operation, you
can set the time and exit the alarm time setting.

Turn on/off the alarm

Short press the alarm button " " to turn it off, the icon will disappear ; press
the alarm button " " again to turn it on, the alarm icon will be displayed.

Special tip:

1. If the alarm is turned on and the setting is completed, the alarm icon will
light up.
2. When the alarm sounds, press any button (not including the speaker net
and sleep aid button) to get 9 minutes of delayed sleep time and then alarm
again; long press any button for more than 3 seconds to turn off the alarm.
3. During the setting of the alarm, you should avoid touching the speaker net
or pressing other buttons, otherwise the alarm will not be set properly.

User manual

Welcome to use the music wake-up light Uwake (hereinafter referred
to as Uwake). Please read this manual carefully to ensure correct and
safe use.
AM
PM
AM
PM

Product Introduction

Uwake is a wake-up alarm clock with colorful lights.
With super bass, 7 color lights, white noise to help sleep, humanized snooze
and other functions.

Product Description

[Front side]

Operation and display section
Alarm clock on
Sleep aid touch button
Time display
Wireless status indication
M
Speaker net: short press 0.5s to
switch the light effect/ long press to
turn the light on or off
+:
Short press switch to the next
song
long press to increase the volume
:
short press play or paus
long press switch machine
-:
Short press switch to the previous
song
long press to decrease the volume
M:
Short press to turn off wireless
connection
long press to adjust the brightness of the
light
Time button:
short press to switch 12H/24H
Long press to enter time setting
Alarm clock:
short press to turn the alarm on or off.
Long press to enter alarm setting

Charging

Before using the power, please plug the Uwake into the charging cable and
connect the charging adapter to charge (the charging adapter must be at least
5V1A or more). Uwake is built-in battery 1800mAh, when charging with DC5V
1A adapter, it is full for about 3 hours (not recommended to charge through PC)
Special note: When the product is charging, it will be slightly hot, which is
normal.

Turn on/off

When power off/on ,long press power button 3 seconds to turn it on/off

View the manual for the Umidigi Uwake here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Umidigi Uwake or do you need help? Ask your question here

Need help?

Do you have a question about the Umidigi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Umidigi Uwake smartwatch is a wearable device that offers a variety of features designed to enhance the user's daily life. The smartwatch boasts a sleek design with a minimalist aesthetic, making it suitable for both casual and formal wear. It features a round dial with a touchscreen display, allowing for easy navigation and interaction with the device. The Umidigi Uwake smartwatch offers basic fitness tracking capabilities, such as step counting and heart rate monitoring. It also includes sleep tracking functionality, allowing users to monitor their sleep patterns and quality. The smartwatch is equipped with a built-in alarm clock, making it a convenient tool for managing daily schedules and reminders. In addition to its fitness and health tracking features, the Umidigi Uwake smartwatch offers notifications for incoming calls, messages, and other alerts from a paired smartphone. It also has a find my phone feature, allowing users to locate their phone if it is misplaced or lost. The smartwatch is compatible with both Android and iOS devices, offering broad compatibility for users of various mobile operating systems.

General
BrandUmidigi
ModelUwake
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Umidigi Uwake below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Umidigi Uwake available in English?

Yes, the manual of the Umidigi Uwake is available in English .

Is your question not listed? Ask your question here

No results