Umidigi Upods manual

Umidigi Upods
7.2 · 1
PDF manual
 · 6 pages
English
manualUmidigi Upods

Product introduction

Earbuds

User Manual

Charging Indicator
Charging Pin
Charging Case
Charging Port
Large Ear Cap
Multi-function Button
Earbuds Indicator
Microphone
Medium Ear Cap
Charging Touch point
Small Ear Cap

Warm Tips:

These earbuds are equipped with a medium ear cap. We are recommend-
ed to replace the large or small ear cap If you feel unwell.

Wear Earbuds

Gently insert the earbuds tilt down into the ear canal, ensure that the
headphone does not shake when you gently shake your head.

Charging

Before starting to use, please tear off the isolation film at the charging touch
point of the earbuds, and charge the charging case and earbuds fully.
Plug in the charging cable can charge both the earbuds and the charging case
at the same time.
When the charging case is not fully charged, the top one of the indicators will
flash, and the four charging indicator will keep light up when fully charged.
During the charging of the earbuds, the red charging indicator will keep light up.
When the earbuds are fully charged, and the white indicator of the earbuds will
light up 1 minute and then goes out.

Turn on

If the earbuds are in the charging case, will be automatically booted when it is
removed from the charging case.
If the earbuds are not in the charging case and are shut down, press and hold
the multi-function button for about 2S (white indicator flashes)

Turn off

Put earbuds into the charging case, the earbuds will automatically shut down.
In the power-on state, long press the multi-function button for about 5S (red
indicator will long bright 2S)
Long press about 5S
Red light long bright 2S

Use the earbuds

Automatic connection: Take earbuds out of the charging case at the same time.
Wait for the 2-3S earbuds to automatically boot. When the white indicator of the
left and right earbuds flashes slowly, open the device Wireless search "Upods"
and connect.
If the connection fails, put the earbuds back in the charging case and repeat
the above operation.
After the first connection, the earbuds when automatically connect to the last
paired device when turned on(Wireless on).
Single ear is used in the same way as both ears
Note: The earbuds have been initialized when produced and can be taken out
directed for related operations.
Earbuds Indicator
Product name: Upods TWS Wireless
Earbuds
Model: Upods
Upods Basic Parameters
Product size: 26.5*15.3*21.5mm
Single Upods weight:4g
Communication distance:10m
Battery capacity:43mAh
Charging time: About 1.5h
Music playtime: About 4h
Standby time:200h
Input parameters:5V---100Ma
Battery type: Lithium ion polymer battery
Wireless connection5.0
Wireless protocol: HFP/A2DP/HSP/
AVRCP

Product Specification

Charging case parameters:
Product size:68*41*31mm
Input parameters:5V---500Ma
Output parameters:5V—150Ma
Charging time:2h
Standby time: About 2 months
Battery capacity:600mAh
Battery type: Lithium ion polymer
battery
Charging case parameters:
Product size:68*41*31mm
Input parameters:5V---500Ma
Output parameters:5V—150Ma
Charging time:2h
Standby time: About 2 months
Battery capacity:600mAh
Battery type: Lithium ion polymer
battery
1.Answer/hang up the phone
Press the multi-function button to answer/hand up the call;
2.Reject the call
When calling, long press the multi-function button for about 1 second to reject
the call.
Long press about 1 second

Earbuds reset

Function

The following functions can be operated on both left and right ears
3. Play/pause music
In standby mode, short press the multi-function button to pause/play music.
Note: The music player background needs to be running.
4. Turn on the voice assistant
In standby or music playback mode, press the multi-function button twice to
turn on the voice assistant (if you need to turn off the voice assistant, you can
press the multi-function button again).
Note: The device needs to support voice and turn on the fast wake-up setting.
5. Answer the second call and switch the call
When the mobile phone calls, short press the multi-function button to answer
the call; when there is a new phone call, short press the multi-function button to
hold the current call and answer the second call; Long press the multi-function
button to switch two calls.

Note:

1. If the product has not been used for more than two weeks, it is recommend-
ed to charge the product ;
2. It is necessary to select a charger that has been produced by a regular
manufacturer and has passed the certification of the local state;
3. Continuous use of headphones for a long time is detrimental to hearing
health, please control the use time and volume reasonably;
4. Using headphones will reduce the perception of external sounds, please do
not use headphones in environments that may threaten safety.

Warranty

1. The warranty period is 1 year since the acquisition date.
2. During the warranty period, if there are any problems or malfunction about
this product in the case of normal use and maintenance, after verification, we
will provide free repair and component replacement.
1 2
3 4 5
If the headset cannot be connected properly, please reset the headset as
follows: Take the headset out of the charging box, and then turn off the two
headset multi-function keys for 10 seconds, respectively, and release and put it
when the red and white lights are on. Return to the charging box, delete the
connection record on the device, re-automatically pair and connect the device.

View the manual for the Umidigi Upods here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Umidigi Upods or do you need help? Ask your question here

Need help?

Do you have a question about the Umidigi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandUmidigi
ModelUpods
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Umidigi Upods below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Umidigi Upods available in English?

Yes, the manual of the Umidigi Upods is available in English .

Is your question not listed? Ask your question here

No results