View the manual for the Ubiquiti Networks UniFi Cloud Key Gen2 here, for free. This manual comes under the category security cameras and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Ubiquiti Networks UniFi Cloud Key Gen2 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Ubiquiti Networks UniFi Cloud Key Gen2.
| Brand | Ubiquiti Networks |
| Model | UniFi Cloud Key Gen2 | UCK-G2 |
| Product | security camera |
| EAN | 0817882024525, 4250605513610 |
| Language | English |
| Filetype | User manual (PDF) |
| Processor frequency | 2 GHz |
| Processor cores | 8 |
| Internal memory | 2 GB |
| Chassis type | - |
| LED indicators | Yes |
| Built-in display | Yes |
| On/off switch | Yes |
| Reset button | Yes |
| Number of HDDs supported | 0 |
| HDD size | - " |
| HDD interface | - |
| Hot-swap drive bays | - |
| RAID support | - |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet interface type | Gigabit Ethernet |
| USB 2.0 ports quantity | 0 |
| Width | 46.8 mm |
| Depth | 119.75 mm |
| Height | 27.1 mm |
| Weight | 172 g |
| Operating temperature (T-T) | 0 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Power consumption (typical) | 5 W |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ubiquiti Networks UniFi Cloud Key Gen2 below.
The Ubiquiti Networks UniFi Cloud Key Gen2 has a weight of 172 g.
The number of megapixels denotes how many pixels there are in the sensor. 1 megapixel equals 1 million pixels. The more pixels, the higher the potential image quality.
MP stands for MegaPixels.
The Ubiquiti Networks UniFi Cloud Key Gen2 has a height of 27.1 mm.
The Ubiquiti Networks UniFi Cloud Key Gen2 has a width of 46.8 mm.
The Ubiquiti Networks UniFi Cloud Key Gen2 has a depth of 119.75 mm.
Yes, the Ubiquiti Networks UniFi Cloud Key Gen2 features LED indicators, which can be useful for quickly checking the status of the device at a glance.
The Ubiquiti Networks UniFi Cloud Key Gen2 comes with 1 Ethernet LAN (RJ-45) port, which allows for easy network connectivity.
Yes, the Ubiquiti Networks UniFi Cloud Key Gen2 has a built-in display, providing users with quick access to important information without the need for additional devices.
The Ubiquiti Networks UniFi Cloud Key Gen2 has a processor frequency of 2 GHz, which helps to ensure smooth performance and efficient operation.
The Ubiquiti Networks UniFi Cloud Key Gen2 has a power consumption of 5 W, which is relatively low compared to other security camera products on the market, making it a more energy-efficient option for users.
To connect the Ethernet cable during hardware installation of the Ubiquiti Networks UniFi Cloud Key Gen2, follow these steps: 1. Connect an Ethernet cable (not included) to the Ethernet port on the front of the Rackmount Accessory. 2. Connect the other end of the Ethernet cable to a port on a compatible PoE switch, such as a UniFi PoE Switch. 3. Remove the pre-installed sticker from the 13-pin connector.
To power the UniFi Cloud Key Gen2 using an 802.3af-compliant switch, follow these steps: 1. Connect an Ethernet cable from the Cloud Key to the switch. 2. Ensure the switch is 802.3af-compliant, like a UniFi PoE Switch. 3. Verify that the switch is providing sufficient power to the Cloud Key. 4. If the Cloud Key is not powering on, check the Ethernet connection and switch compatibility. 5. Consider using a USB power source as an alternative if the switch does not provide adequate power. 6. Refer to the UniFi Cloud Key manual for detailed troubleshooting steps if power issues persist.
To use the Ubiquiti Networks UniFi Cloud Key Gen2, you need the following system requirements for the mobile app and web browser: 1. Mobile App: You should have the latest version of the UniFi App, which can be found on the App Store and Google Play. 2. Web Browser: It is recommended to use the latest Google Chrome browser for optimal functionality. Other browsers may have limited features. Ensure that all Ethernet cabling runs are done using CAT5 or higher. Professional installers must comply with local regulations regarding frequency channels, output power, indoor cabling, and Dynamic Frequency Selection (DFS) requirements. To set up the UniFi Cloud Key Gen2 via the app, download and install the UniFi SDN app, enable Bluetooth on your mobile device, and be within 1.5 meters (5 feet) of the installation location. Launch the app, tap the + icon, and follow the on-screen instructions.
Yes, the manual of the Ubiquiti Networks UniFi Cloud Key Gen2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Ubiquiti Networks and is the answer not in the manual?
Question and answer
Number of questions: 0