View the manual for the U-Line U-CLR1215S-40B here, for free. This manual comes under the category ice-cream makers and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the U-Line U-CLR1215S-40B or do you need help? Ask your question here
The U-Line U-CLR1215S-40B is an ice-cream maker that is designed to produce large quantities of ice-cream in a short amount of time. This particular model has a capacity of 25 pounds of ice-cream per day. It features a built-in water filter system that helps to ensure the quality and purity of the water used in the ice-making process. The ice-cream maker also comes equipped with a digital control panel that allows the user to easily set and adjust the temperature and other settings. The U-Line U-CLR1215S-40B has a stainless steel finish that gives it a modern and sleek appearance. Its compact size makes it suitable for use in both commercial and residential kitchens. The ice-cream maker operates on standard 120-volt electrical power and has a built-in drain pump for ease of use. The U-Line U-CLR1215S-40B is designed for durability and longevity, with a robust construction that can stand up to heavy use. The ice-cream maker is also easy to clean and maintain, with removable components that can be easily washed and sanitized. The U-Line U-CLR1215S-40B is a reliable and efficient ice-cream maker that can produce high-quality ice-cream in large quantities.
| Brand | U-Line |
| Model | U-CLR1215S-40B |
| Product | ice-cream maker |
| EAN | 833790032193 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the U-Line U-CLR1215S-40B below.
The most likely reason is that it is not properly plugged into a power outlet or there might be a tripped circuit breaker. Please check the power connection and reset any breaker if necessary.
Soft ice cream can be the result of the freezer temperature being too high or the churning time being too short. Ensure that the freezer is set to the recommended temperature and follow the recipe's recommended churning time.
Ice crystals can form if the ice cream mixture is not properly chilled before churning. Make sure to thoroughly chill the mixture in the refrigerator before pouring it into the ice cream maker to minimize the likelihood of ice crystal formation.
The U-Line U-CLR1215S-40B Ice Cream Maker has a maximum capacity of X liters/ounces. It is important not to exceed this capacity to ensure optimal performance and avoid overflow.
It is recommended to clean the ice cream maker thoroughly after each use to maintain hygiene and prevent the buildup of residue. Regular cleaning will also help to prolong the machine's lifespan and ensure consistent performance.
Yes, the manual of the U-Line U-CLR1215S-40B is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the U-Line and is the answer not in the manual?
Question and answer
Number of questions: 6Can you adjust your ice tube frozen more? After you adjust your ice thickness, what do you press to get it out of thickness program mode?
We had some work done on our reverse osmosis and after that my ice maker will not produce ice
I have a uline clr1215INT-40B still covered under warranty as it was installed 1/27/21. There is conflicting info as to how to put it in cleaning mode. I was given a “quick start guide” ONLY and I want the complete instruction manual. I regularly clean it with only recommended solution sold by uline every 6 months. I had to speak to someone last time to get it properly in clean mode as manual online was incorrect. I cannot remember the buttons to push so I want clarification. I have model and serial number if you need.
1 comment
My cell # is 757-575-8411
Cleaning my uline icemaker cannot get water to flower over the evaporator
Where can I get a water valve assembly? Part 41 as seen in the manual diagram
water not flowing into upper trough