Tunturi GO Run 20 manual

Tunturi GO Run 20
9.1 · 2
PDF manual
 · 52 pages
English
manualTunturi GO Run 20

WWW.TUNTURI.COM

GO Treadmill 10

USER MANUAL .............................. 03-13

BETRIEBSANLEITUNG .................14-23

MODE D'EMPLOI ...........................24-34

HANDLEIDING ...............................35-45

Serial number
Seriennummer
Numero de serie
Serienummer

View the manual for the Tunturi GO Run 20 here, for free. This manual comes under the category treadmill and has been rated by 2 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Tunturi GO Run 20 or do you need help? Ask your question here

Need help?

Do you have a question about the Tunturi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
A
AdelAugust 25, 2020

I would like to purchase the motor controller for the Tunturi GO Run 20 Treadmill

J
Julius ManiatisMarch 19, 2021

What is the maximum weight it can carry

General
BrandTunturi
ModelGO Run 20 | 14GRN20000
Producttreadmill
EAN8717842017692
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Depth1790 mm
Width775 mm
Height1210 mm
Weight- g
Running area (W x L)460 x 1370 mm
Features
Maximum user weight135 kg
Number of programs9
Maximum speed16 km/h
Optional heart rate measurementChest belt
FoldableYes
Training displayed parametersDistance, Time
Display
Built-in displayYes
DisplayLCD
Design
Bottle holderYes
Transport wheelsYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Tunturi GO Run 20 below.

What is the weight of the Tunturi GO Run 20?

The Tunturi GO Run 20 has a weight of - g.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is the height of the Tunturi GO Run 20?

The Tunturi GO Run 20 has a height of 1210 mm.

What is the width of the Tunturi GO Run 20?

The Tunturi GO Run 20 has a width of 775 mm.

What is the depth of the Tunturi GO Run 20?

The Tunturi GO Run 20 has a depth of 1790 mm.

What are the dimensions of the running area on the Tunturi GO Run 20?

The dimensions of the running area on the Tunturi GO Run 20 are 460 x 1370 mm. This provides a spacious surface for users to run comfortably.

How many programs does the Tunturi GO Run 20 have?

The Tunturi GO Run 20 has 9 programs. This offers users a variety of workout options to choose from and helps to keep exercise routines diverse and engaging.

What is the maximum speed of the Tunturi GO Run 20?

The Tunturi GO Run 20 has a maximum speed of 16 km/h. This allows users to challenge themselves with higher intensity workouts if desired.

Does the Tunturi GO Run 20 have a built-in display?

Yes, the Tunturi GO Run 20 features a built-in display. This makes it convenient for users to monitor their workout progress and track their performance.

Can heart rate be measured on the Tunturi GO Run 20?

Yes, heart rate can be measured on the Tunturi GO Run 20 using a chest belt (sold separately). This allows users to monitor their heart rate during workouts and tailor their training accordingly.

How do I properly assemble the Tunturi GO Run 20 treadmill?

To properly assemble the Tunturi GO Run 20 treadmill, follow these steps: 1. Prepare the assembly site: Cover the floor with the packing material from the box to protect it during assembly. 2. Check the parts: Ensure that all the necessary parts are present, including the frame, power cord, assembly kit, and assembly tools. 3. Lift the treadmill: Fold up the deck before lifting the treadmill out of the box to avoid injury. 4. Attach the upright: Lift up the upright and place the screws and washers inside the holes at the bottom of the upright. Tighten them securely. 5. Attach the side caps: Attach the side caps to the main frame using the provided screws. 6. Check safety features: Make sure the safety key is in place and that the treadmill is not damaged or dropped into water. Check that the air openings are free of lint or obstructions. 7. Follow usage guidelines: The treadmill is designed for home use and has weight and temperature limitations. It should not be used outdoors or by individuals weighing over 135 kg (300 lbs). 8. Store and maintain: Store the treadmill in a dry place with minimal temperature variation. Unplug it when not in use and follow the maintenance instructions provided in the manual. Remember to refer to the specific assembly instructions provided in the manual for the Tunturi GO Run 20 treadmill for detailed guidance.

What should I do if the treadmill is not turning on?

If the Tunturi GO Run 20 treadmill is not turning on, follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the treadmill is properly plugged into a functioning power outlet. Verify that the power cord is securely connected to both the treadmill and the outlet. 2. Reset the treadmill: Turn off the power switch and wait for about 1 minute. Then, turn the power switch back on. This reset may clear any incidental errors and allow the treadmill to function normally. 3. Check for error codes: If the treadmill displays an error code, refer to the manual for specific troubleshooting instructions related to that error code. For example, if the display shows an E1 error code, unplug the treadmill from the wall outlet and wait for 1 minute before turning it on again. If the error persists, contact your local Tunturi dealer for service. 4. Check the safety switch: Ensure that the safety tether key is properly installed on the console. If the key is removed or not properly attached, the treadmill will not operate. Make sure the clip of the safety tether key is securely attached to your clothing. If the above steps do not resolve the issue, it is recommended to contact your local Tunturi dealer for further assistance or service.

How do I adjust the speed and incline settings on the treadmill?

To adjust the speed and incline settings on the Tunturi GO Run 20 treadmill, follow these steps: 1. Speed Adjustment: - Press the SPEED + button to increase the speed level. Each press increases the speed by 0.2 km/h (0.1 mph). - To speed up the increment, press and hold the SPEED + button for 2 seconds. - Press the SPEED - button to decrease the speed level. Each press decreases the speed by 0.2 km/h (0.1 mph). - To speed up the decrement, press and hold the SPEED - button for 2 seconds. 2. Incline Adjustment: - Press the INCLINE + button to increase the incline level. Each press increases the incline by 1%. - To speed up the increment, press and hold the INCLINE + button for 2 seconds. - Press the INCLINE - button to decrease the incline level. Each press decreases the incline by 1%. - To speed up the decrement, press and hold the INCLINE - button for 2 seconds. Please note that the specific speed and incline ranges may vary for the Tunturi GO Run 20 treadmill. Refer to the console display for the current speed and incline values.

What maintenance procedures should I follow to keep the treadmill in good condition?

To keep the Tunturi GO Run 20 treadmill in good condition, follow these maintenance procedures: 1. Cleaning: - Wipe the handlebars and console with a damp cloth or towel to remove dust. Avoid using solvents. - Use a small vacuum nozzle to carefully vacuum around all visible components, such as the belt, running deck, and side rails. - Keep the area near the treadmill clean to prevent dust accumulation. 2. Lubrication: - Check the lubrication of the treadmill belt once a month for average domestic use (up to 60 minutes per day). Lubricate the belt only if necessary. - If the treadmill is used more intensively, check the lubrication at shorter intervals, preferably before each training session. - To check the lubrication, ensure the treadmill is powered off. Step on the treadmill belt and stand where you normally run. - Hold the horizontal handlebar and push the belt with your feet to slide it back and forth. The belt should move smoothly and quietly. - If you notice jerky movement or the belt does not slide smoothly, it may require lubrication. Consult your local Tunturi dealer for the appropriate lubricant and lubrication instructions. Please note that these maintenance procedures are general guidelines. For detailed instructions and specific recommendations, refer to the manual for the Tunturi GO Run 20 treadmill.

What is covered under the warranty for the Tunturi GO Run 20 treadmill?

The warranty coverage for the Tunturi GO Run 20 treadmill includes the following: 1. Damage due to negligence: The warranty will not cover any damage caused by not following the instructions provided in the manual regarding assembly, setup, and maintenance of the equipment. 2. Unauthorized modifications: Any changes or modifications to the treadmill that are not approved by Tunturi will void the warranty and release Tunturi from any liability. It is important to note that the warranty coverage may vary depending on the specific terms and conditions provided by Tunturi. For detailed information about the warranty coverage for the Tunturi GO Run 20 treadmill, please refer to the manual.

How do I properly assemble the Tunturi GO Run 20 treadmill?

To properly assemble the Tunturi GO Run 20 treadmill, follow these steps: 1. Prepare the assembly site: Cover the floor with the packing material from the box to protect it during assembly. 2. Check the parts: Make sure all the necessary parts are present, including the frame, power cord, assembly kit, and assembly tools. 3. Lift the treadmill: Fold up the deck before lifting the treadmill out of the box to avoid injury. 4. Attach the upright: Lift up the upright and place the screws and washers inside the holes at the bottom of the upright. Tighten them securely. 5. Attach the side caps: Attach the side caps to the main frame using the provided screws. 6. Check safety features: Ensure that the safety key is properly inserted and functioning. 7. Position the treadmill: Place the treadmill in a suitable location indoors, away from aerosol products and excessive humidity. The temperature range should be between +10°C and +35°C. 8. Read the instructions: Familiarize yourself with the user manual for further information on operating and maintaining the treadmill. Remember to follow these assembly instructions carefully to ensure the proper setup of your Tunturi GO Run 20 treadmill.

What should I do if the treadmill is not turning on?

If the Tunturi GO Run 20 treadmill is not turning on, follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the treadmill is properly plugged into a functioning power outlet. Verify that the power cord is securely connected to both the treadmill and the outlet. 2. Reset the treadmill: If the treadmill is unresponsive, turn off the power switch and wait for about 1 minute. Then, turn the power switch back on to reset the treadmill. This can help clear any incidental errors and restore normal operation. 3. Check for error codes: If the treadmill displays an error code, refer to the user interface for information about the specific fault. Follow the recommended actions provided in the manual for each error code. 4. Verify the safety key: Make sure that the safety key is properly inserted into the console. The treadmill will not operate if the safety key is not in place. 5. Contact Tunturi dealer for service: If the treadmill is still not operational after following the above steps, it is recommended to contact your local Tunturi dealer for further assistance and service. Remember to always prioritize safety and consult the user manual for detailed instructions specific to the Tunturi GO Run 20 treadmill.

How do I adjust the speed and incline settings on the treadmill?

To adjust the speed and incline settings on the Tunturi GO Run 20 treadmill, follow these steps: 1. Speed Adjustment: - Press the SPEED + button to increase the speed level. Each press increases the speed by 0.2 km/h (0.1 mph). - To speed up the increment, press and hold the SPEED + button for 2 seconds. - Press the SPEED - button to decrease the speed level. Each press decreases the speed by 0.2 km/h (0.1 mph). - To speed up the decrement, press and hold the SPEED - button for 2 seconds. 2. Incline Adjustment: - Press the INCLINE + button to increase the incline level. Each press increases the incline by 1%. - To speed up the increment, press and hold the INCLINE + button for 2 seconds. - Press the INCLINE - button to decrease the incline level. Each press decreases the incline by 1%. - To speed up the decrement, press and hold the INCLINE - button for 2 seconds. 3. Use the Speed Hot Keys: - The treadmill has three speed hot keys set at 3, 6, and 9 km/h (or mph). Pressing the corresponding speed hot key will instantly change the speed to the desired level. 4. Use the Incline Hot Keys: - The treadmill has three incline hot keys set at 3, 6, and 9%. Pressing the corresponding incline hot key will instantly change the incline to the desired level. Remember to refer to the user interface on the treadmill console for real-time feedback on the speed and incline settings.

What maintenance procedures should I follow to keep the treadmill in good condition?

To keep the Tunturi GO Run 20 treadmill in good condition, follow these maintenance procedures: 1. Regular Cleaning: - Wipe down the treadmill after each use using a soft, damp cloth to remove any sweat or dust. - Use a mild, non-abrasive cleaner to clean the console and other surfaces. Avoid using harsh chemicals or abrasive materials that may damage the treadmill. 2. Belt Lubrication: - Check the belt lubrication regularly and apply silicone-based lubricant if needed. Refer to the user manual for specific instructions on belt lubrication. 3. Belt Tension Adjustment: - Periodically check the belt tension and adjust it if necessary. The belt should have a slight give when pressed with your hand, but not be too loose or too tight. 4. Motor Compartment Cleaning: - Remove the motor cover and vacuum or wipe away any dust or debris that may have accumulated in the motor compartment. Ensure the motor is free from obstructions. 5. Safety Key Inspection: - Regularly inspect the safety key for any damage or wear. Replace the safety key if it shows signs of damage or does not fit securely into the console. 6. Periodic Maintenance: - Follow the recommended maintenance schedule outlined in the user manual. This may include tasks such as belt alignment, motor brush inspection, and general inspection of the treadmill components. By following these maintenance procedures, you can ensure the longevity and optimal performance of your Tunturi GO Run 20 treadmill.

What is covered under the warranty for the Tunturi GO Run 20 treadmill?

The warranty coverage for the Tunturi GO Run 20 treadmill is not explicitly mentioned in the available document excerpts. However, it is important to note that the warranty may vary depending on the region and specific terms and conditions set by Tunturi. It is recommended to refer to the warranty information provided in the user manual or contact Tunturi directly for detailed information regarding the warranty coverage for the GO Run 20 treadmill.

Is the manual of the Tunturi GO Run 20 available in English?

Yes, the manual of the Tunturi GO Run 20 is available in English .

Is your question not listed? Ask your question here

No results