Tunturi Go Bike 70 manual

Tunturi Go Bike 70
8.5 · 2
PDF manual
 · 32 pages
English
manualTunturi Go Bike 70

BIKE 70

English

View the manual for the Tunturi Go Bike 70 here, for free. This manual comes under the category hometrainers and has been rated by 2 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Tunturi Go Bike 70 or do you need help? Ask your question here

Need help?

Do you have a question about the Tunturi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandTunturi
ModelGo Bike 70
Producthometrainer
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Tunturi Go Bike 70 below.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

How do I adjust the seat height on the Tunturi Go Bike 70 hometrainer?

To adjust the seat height on the Tunturi Go Bike 70 hometrainer, follow these steps: 1. Loosen the seat adjustment knob located near the seat. 2. Move the seat to the desired position, either higher or lower. 3. Once the seat is in the desired position, tighten the seat adjustment knob to secure it in place. To ensure proper adjustment, make sure that when sitting on the bike, your leg is almost straight with the arch of your foot touching the pedal at its lowest point. Remember to adjust the seat height according to your comfort and exercise needs. A proper seat height will help you maintain proper form and prevent discomfort during your workout. By following these steps, you can easily adjust the seat height on your Tunturi Go Bike 70 hometrainer. Enjoy your workout!

What should I do if the Tunturi Go Bike 70 hometrainer is making a squeaking noise during use?

If your Tunturi Go Bike 70 hometrainer is making a squeaking noise during use, there are a few steps you can take to address the issue: 1. Contact the dealer: If the equipment is not functioning properly, it is recommended to immediately contact the dealer. Provide them with the model number, serial number, and a description of the problem, as well as any relevant information about the conditions of use and the purchase date. 2. Check for damaged parts: Inspect the hometrainer for any damaged or defective parts. If you notice any issues, such as broken or worn-out components, it is important to contact your dealer for assistance. Do not attempt to open the equipment without consulting the dealer. 3. Proper transport and storage: When moving or storing the hometrainer, follow the recommended guidelines. Remove the adapter before transport or storage and ensure that the equipment is carried or moved by at least two persons. Take care to avoid damage to the floor surface and avoid moving the equipment upstairs using the wheels. 4. Avoid humid surroundings: To prevent damage to the equipment, do not use or store it in humid surroundings where the air humidity exceeds 80%. This can help maintain the performance and longevity of the hometrainer. 5. Electrical safety precautions: If your hometrainer has electric power, it is important to follow electrical safety guidelines. Always check that the mains voltage matches the rating plate of the equipment before use. Avoid using extension cables and keep the mains cable away from heat, oil, and sharp edges. If the mains cable or plug is damaged or defective, contact your dealer for assistance. By following these steps, you can address the squeaking noise issue and ensure the proper functioning of your Tunturi Go Bike 70 hometrainer.

How do I troubleshoot if the console display on the Tunturi Go Bike 70 hometrainer is not functioning correctly?

To troubleshoot if the console display on the Tunturi Go Bike 70 hometrainer is not functioning correctly, follow these steps: 1. Check for any obstructions or debris on the console display. Clean the surface of the console with a dry cloth to remove any sweat or dirt. 2. Ensure that you are touching the display with the tip of your finger only. Avoid using sharp objects or nails that may damage the display. 3. Make sure that the console is not exposed to direct sunlight, as this can affect its performance. Move the hometrainer to a shaded area if necessary. 4. If the console switches to standby mode after 90 seconds of inactivity, press the dial or any button to wake it up. 5. If the display is still not functioning correctly, try resetting the console. Press and hold the reset button to return it to the default settings. 6. If none of the above steps resolve the issue, contact Tunturi customer support for further assistance. Remember to refer to the specific instructions for the Tunturi Go Bike 70 hometrainer model when troubleshooting the console display.

Is the manual of the Tunturi Go Bike 70 available in English?

Yes, the manual of the Tunturi Go Bike 70 is available in English .

Is your question not listed? Ask your question here

No results