Tunturi FitRun 40i manual

Tunturi FitRun 40i
8.3 · 4
PDF manual
 · 64 pages
English
manualTunturi FitRun 40i

Attention, Achtung, Attention, Attentie

- Please read this Owner’s manual before assembling this product.
- Bitte lesen Sie dieses Handbuch durch, bevor Sie mit er Montage dieses Produkts beginnen.
- Veuillez lire ce manuel avant de commencer le montage de ce produit.
- Leest u deze handleiding voordat u dit apparaat installeert.

www.tunturi.com

User manual

Benutzerhandbuch

Manuel de l’utilisateur

Gebruikershandleiding

View the manual for the Tunturi FitRun 40i here, for free. This manual comes under the category treadmill and has been rated by 4 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Tunturi FitRun 40i or do you need help? Ask your question here

Need help?

Do you have a question about the Tunturi and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandTunturi
ModelFitRun 40i
Producttreadmill
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Tunturi FitRun 40i below.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

How do I troubleshoot if the treadmill is not starting or turning on?

To troubleshoot if the Tunturi FitRun 40i treadmill is not starting or turning on, you can follow these steps: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. Check if the power cord is securely connected to the treadmill. 2. Reset the circuit breaker: If the treadmill is not turning on, check the circuit breaker. If it has tripped, reset it by flipping the switch to the "ON" position. If the breaker continues to trip, it may indicate a problem with the electrical circuit or the treadmill itself. In such cases, it is recommended to contact your Tunturi dealer for assistance. 3. Lubricate the running belt: Insufficient lubrication can cause the treadmill to not start or turn on. Apply lubricant to the middle of the running deck under the running belt. Let the treadmill operate at a speed of at least 5 km/h for 5 minutes to spread the lubricant evenly. 4. Check for belt slippage: If the treadmill belt is slipping, it may prevent the treadmill from starting. Tighten the rear roller bolts to prevent slippage at the front roller. Adjust the running belt tension bolts in increments of 1/4 turn until the belt stops slipping. Avoid over-tightening, as it can damage the belt. 5. Check the running belt tracking: Improper running belt tracking can also affect the starting of the treadmill. Use a 10 mm Allen wrench to adjust the rear roller from the left side. Turn the bolt clockwise to move the belt to the right and counter-clockwise to move it to the left. Make small adjustments and wait for the belt to stabilize in the center of the running deck. If you have followed these troubleshooting steps and the treadmill still does not start or turn on, it is recommended to contact your Tunturi dealer for further assistance.

What should I do if the treadmill stops suddenly during a workout?

If the Tunturi FitRun 40i treadmill stops suddenly during a workout, you can try the following troubleshooting steps: 1. Check the power source: Ensure that the treadmill is still connected to a working power outlet. Make sure the power cord is securely plugged in. 2. Reset the circuit breaker: If the treadmill has tripped the circuit breaker, reset it by flipping the switch to the "ON" position. If the breaker continues to trip, it may indicate a problem with the electrical circuit or the treadmill itself. In such cases, it is recommended to contact your Tunturi dealer for assistance. 3. Lubricate the running belt: Insufficient lubrication can cause the treadmill to stop suddenly. Apply lubricant to the middle of the running deck under the running belt. Let the treadmill operate at a speed of at least 5 km/h for 5 minutes to spread the lubricant evenly. 4. Check for belt slippage: If the treadmill belt is slipping, it may cause the treadmill to stop abruptly. Tighten the rear roller bolts to prevent slippage at the front roller. Adjust the running belt tension bolts in increments of 1/4 turn until the belt stops slipping. Avoid over-tightening, as it can damage the belt. 5. Check the running belt tracking: Improper running belt tracking can also cause the treadmill to stop suddenly. Use a 10 mm Allen wrench to adjust the rear roller from the left side. Turn the bolt clockwise to move the belt to the right and counter-clockwise to move it to the left. Make small adjustments and wait for the belt to stabilize in the center of the running deck. If you have followed these troubleshooting steps and the treadmill continues to stop suddenly during a workout, it is recommended to contact your Tunturi dealer for further assistance.

How can I troubleshoot if the console display is not working properly?

To troubleshoot if the console display of the Tunturi FitRun 40i treadmill is not working properly, you can try the following steps: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. Make sure the power cord is securely connected to the treadmill. 2. Restart the treadmill: Turn off the treadmill and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can help reset the console and resolve any temporary issues. 3. Check for loose connections: Inspect the cables and connections between the console and the treadmill. Ensure that they are securely connected and not damaged. If any cables are loose or damaged, try reconnecting them or replacing them if necessary. 4. Clean the console: Use a soft, dry cloth to clean the console display. Avoid using harsh chemicals or abrasive materials that could damage the screen. Cleaning the console can help improve visibility and responsiveness. 5. Contact Tunturi dealer: If the console display continues to have issues or does not work at all, it is recommended to contact your Tunturi dealer for further assistance. Provide them with the model and serial number of your treadmill and describe the problem in detail. Following these troubleshooting steps should help resolve any issues with the console display of the Tunturi FitRun 40i treadmill.

What should I do if the treadmill belt is slipping or not moving smoothly?

If the treadmill belt of the Tunturi FitRun 40i is slipping or not moving smoothly, you can try the following troubleshooting steps: 1. Check the belt tension: Ensure that the treadmill belt is properly tensioned. If the belt is too loose, it may slip during use. Use the provided Allen wrench to adjust the tension bolts located at the rear end of the treadmill. Make small adjustments by turning the bolts clockwise to tighten the belt or counterclockwise to loosen it. Test the belt tension after each adjustment until it moves smoothly without slipping. 2. Lubricate the belt: Apply treadmill belt lubricant to the underside of the belt. Follow the instructions in the manual for the recommended type and amount of lubricant. Spread the lubricant evenly across the width of the belt. This helps reduce friction and allows the belt to move smoothly. 3. Clean the belt and deck: Remove any dirt, dust, or debris from the belt and deck. Use a soft cloth or brush to gently clean the surface. Accumulated debris can cause the belt to slip. Regular cleaning helps maintain optimal performance. 4. Inspect the rollers: Check the rollers for any signs of wear or damage. Damaged rollers can cause the belt to slip. If you notice any issues, contact your Tunturi dealer for assistance. 5. Verify proper alignment: Ensure that the treadmill belt is properly aligned. If it is off-center, it may cause the belt to slip. Adjust the belt alignment by turning the rear roller adjustment bolts. Make small adjustments and test the belt movement until it is centered on the deck. Following these troubleshooting steps should help resolve the issue of a slipping or not smoothly moving treadmill belt on the Tunturi FitRun 40i.

How do I troubleshoot if the treadmill programs are not working as expected?

If the treadmill programs on the Tunturi FitRun 40i are not working as expected, you can troubleshoot the issue by following these steps: 1. Check the program selection: Ensure that you have selected the desired program correctly. Use the program buttons on the console to navigate through the available options. Make sure you have chosen the program that matches your workout goals. 2. Verify the program settings: Double-check the program settings to ensure they are configured correctly. Pay attention to parameters such as speed, incline, and duration. Adjust the settings as needed to align with your preferences and fitness level. 3. Reset the program: If the program is not functioning properly, try resetting it. Stop the treadmill and return to the main menu. Select the program again and start from the beginning. This can help resolve any temporary glitches. 4. Calibrate the treadmill: If the program is consistently inaccurate or not matching your expectations, consider calibrating the treadmill. Follow the instructions in the manual to calibrate the speed and incline settings. Calibration ensures accurate program performance. 5. Contact Tunturi dealer: If the programs continue to not work as expected or if you encounter persistent issues, it is recommended to contact your Tunturi dealer for further assistance. Provide them with detailed information about the problem and any error messages displayed on the console. By following these troubleshooting steps, you should be able to address any issues with the treadmill programs on the Tunturi FitRun 40i.

Is the manual of the Tunturi FitRun 40i available in English?

Yes, the manual of the Tunturi FitRun 40i is available in English .

Is your question not listed? Ask your question here

No results