View the manual for the Tunturi E80 here, for free. This manual comes under the category hometrainers and has been rated by 1 people with an average of a 10. This manual is available in the following languages: English. Do you have a question about the Tunturi E80 or do you need help? Ask your question here
| Brand | Tunturi |
| Model | E80 |
| Product | hometrainer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Tunturi E80 below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
To troubleshoot if the parts of the Tunturi E80 hometrainer do not fit together during assembly, follow these steps: 1. Check the parts: Ensure that you have received all the necessary parts mentioned in the assembly instructions. Verify that none of the parts are damaged or missing. 2. Review the assembly instructions: Carefully read through the assembly instructions provided in the manual. Make sure you are following the correct sequence and steps for assembling the hometrainer. 3. Double-check alignment: Pay attention to the alignment of the parts. Ensure that the holes, slots, or connectors on each piece align properly with the corresponding parts. If any parts seem misaligned, try adjusting them gently to fit together. 4. Apply gentle force: In some cases, certain parts may require a bit of force to fit together. Use gentle pressure or slight tapping to help align and connect the parts. Avoid using excessive force, as it may cause damage. 5. Seek assistance if needed: If you have followed the above steps and are still experiencing difficulty in fitting the parts together, consider seeking assistance from a professional or contacting the dealer for further guidance. By following these troubleshooting steps, you should be able to address the issue of parts not fitting together during the assembly of the Tunturi E80 hometrainer.
To troubleshoot if the seat height adjustment mechanism of the Tunturi E80 hometrainer is not working properly, follow these steps: 1. Check the seat locking knob: Ensure that the seat locking knob is properly fastened before starting to exercise. Make sure it is tightened clockwise to secure the seat in place. 2. Adjust the seat height: Loosen the seat locking knob by pulling it outwards. Hold onto the seat with one hand and use your other hand to move the seat tube upwards or downwards to the desired height. Once the height is right, release the knob to lock the seat in place. Remember to tighten the locking knob by turning it clockwise. 3. Check for proper alignment: Ensure that the seat is aligned properly with the grooves of the lower locking lever. Turn the upper locking lever towards the top of the seat rails and lock the seat by tightening the locking screw. 4. Verify the foot position: The basic rule for setting the seat height is that the arch of your foot should reach the pedal at its lowest point with your leg almost straight. Adjust the seat height accordingly to achieve the correct foot position. By following these steps, you should be able to troubleshoot and resolve any issues with the seat height adjustment mechanism of the Tunturi E80 hometrainer.
If the resistance level is not changing when you adjust it on the Tunturi E80 hometrainer, you can follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the hometrainer is properly connected to a power source. Make sure the power cord is securely plugged into an outlet. 2. Verify the console settings: Check the console settings to ensure that the resistance adjustment feature is enabled. Make sure the console is not in a preset program mode that overrides manual resistance adjustments. 3. Clean the contacts: Over time, dust or dirt may accumulate on the contacts between the resistance adjustment mechanism and the console. Use a clean, dry cloth to gently wipe the contacts and remove any debris. 4. Calibrate the resistance: Some hometrainers require periodic calibration to ensure accurate resistance levels. Consult the manual for instructions on how to calibrate the resistance mechanism of the Tunturi E80 hometrainer. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Tunturi customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect and repair the hometrainer if necessary. By following these steps, you should be able to troubleshoot and resolve the issue of the resistance level not changing on the Tunturi E80 hometrainer.
To troubleshoot if the console of the Tunturi E80 hometrainer is not displaying any workout data, you can follow these steps: 1. Check the power source: Ensure that the hometrainer is properly connected to a power source. Make sure the power cord is securely plugged into an outlet. 2. Verify the console settings: Check the console settings to ensure that the display is not turned off or in sleep mode. Press any key or start pedaling to activate the console if it is in sleep mode. 3. Check the connection cables: Inspect the cables connecting the console to the hometrainer. Ensure that they are securely plugged in and not damaged. If there are any loose or damaged cables, try reconnecting or replacing them. 4. Reset the console: If the console is unresponsive or not displaying any data, try resetting it. Refer to the manual for instructions on how to reset the console of the Tunturi E80 hometrainer. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Tunturi customer support for further assistance. They can provide specific troubleshooting steps or arrange for a technician to inspect and repair the console if necessary. By following these steps, you should be able to troubleshoot and resolve the issue of the console not displaying any workout data on the Tunturi E80 hometrainer.
To troubleshoot if the pedals of the Tunturi E80 hometrainer are squeaking during use, you can follow these maintenance steps: 1. Clean the pedals: Use a clean, dry cloth to wipe the pedals and remove any dust, dirt, or debris that may be causing the squeaking. Pay attention to the areas where the pedals connect to the crank arms. 2. Lubricate the pedal joints: Apply a small amount of silicone-based lubricant to the pedal joints where they connect to the crank arms. This can help reduce friction and eliminate the squeaking sound. Be careful not to over-lubricate, as excess lubricant can attract more dirt and debris. 3. Check the pedal straps: If your hometrainer has pedal straps, inspect them for any signs of wear or damage. Replace any worn-out or damaged straps to ensure a secure and noise-free pedaling experience. 4. Tighten the pedal screws: Check the screws that secure the pedals to the crank arms. If they are loose, use a suitable wrench or Allen key to tighten them. Ensure that the pedals are securely attached to the crank arms to prevent any movement or noise. By following these maintenance steps, you should be able to address the issue of squeaking pedals on the Tunturi E80 hometrainer.
Yes, the manual of the Tunturi E80 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Tunturi and is the answer not in the manual?
Question and answer
Number of questions: 0