View the manual for the Troy-Bilt TB260 XP here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 9.5. This manual is available in the following languages: English. Do you have a question about the Troy-Bilt TB260 XP or do you need help? Ask your question here
The Troy-Bilt TB260 XP is a lawnmower designed for residential use. It features a 159cc engine, providing sufficient power for cutting grass effectively. The mower has a 21-inch cutting deck, allowing for a wide cutting path to cover more ground in less time. It is equipped with dual-lever height adjustment, enabling the user to easily select the desired grass height. The TB260 XP comes with a TriAction cutting system, which includes a rake bumper, specialized blade, and symmetrical deck for a clean and even cut. This system helps to mulch, side discharge, or bag the grass clippings efficiently. The lawnmower has front-wheel-drive self-propulsion, making it easier to maneuver on uneven terrain or slopes. Additionally, the TB260 XP has a 1.9-bushel rear bag for collecting grass clippings, reducing the need for frequent stops to empty the bag. The mower is designed with a comfortable handle and adjustable ergonomic features for user convenience. Overall, the Troy-Bilt TB260 XP is a reliable and efficient lawn care tool for homeowners.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Troy-Bilt TB260 XP below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
To ensure that the rear mulch plug is properly installed for mulching grass with the Troy-Bilt TB260 XP lawnmower, follow these steps: 1. Remove the grass catcher or side discharge chute from the mower. 2. Check if the rear mulch plug is installed. If not, lift the mulch plug and slide the hooks of the side discharge chute or side discharge blower under the mulch plug hinge pin. Lower the mulch plug back in place. 3. Ensure that the rear discharge door is closed to seal the rear opening of the mower. 4. Do not remove the side mulch plug at any time to maintain proper mulching functionality. 5. For effective mulching, avoid cutting wet grass and refrain from mulching grass that has grown in excess of four inches. 6. If mulching is not recommended due to excessive grass height, use the grass catcher to collect clippings instead.
To effectively mulch grass with your Troy-Bilt TB260 XP lawnmower and prevent clumps of grass, follow these steps: 1. Remove the grass catcher or side discharge chute from the mower. 2. Ensure the rear mulch plug is installed and allow the rear discharge door to close. 3. Avoid cutting wet grass as it hinders effective mulching. 4. Do not mulch grass that has grown over four inches; instead, use the grass catcher to collect clippings. By following these steps, you can improve the mulching performance of your mower and avoid leaving clumps of grass behind.
Yes, the manual of the Troy-Bilt TB260 XP is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Troy-Bilt and is the answer not in the manual?
Question and answer
Number of questions: 0