View the manual for the Troy-Bilt TB210B here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Troy-Bilt TB210B or do you need help? Ask your question here
The Troy-Bilt TB210B lawnmower is a gas-powered walk-behind mower designed for residential use. It is equipped with a 159cc Troy-Bilt OHV engine that provides reliable and efficient performance. The TB210B features a 21-inch cutting deck made of steel, allowing for a wide cutting swath to cover more ground in less time. This lawnmower offers a 3-in-1 cutting system, allowing users to choose between mulching, bagging, or side discharge options depending on their preference. The dual-lever height adjustment feature provides easy control over the cutting height, with six different positions to choose from. The TB210B is designed with larger 11-inch rear wheels to improve maneuverability and traction, making it easier to navigate through various terrains. Additionally, the ergonomic handle is designed for comfort during operation, reducing strain on the user's hands and arms. Overall, the Troy-Bilt TB210B lawnmower is a reliable and durable option for homeowners looking to maintain their lawn efficiently.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Troy-Bilt TB210B below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
To ensure that the rear mulch plug is properly installed when using the Troy-Bilt TB210B lawnmower as a mulcher, follow these steps: 1. Lift the mulch plug to access the installation area. 2. Slide the hooks of the side discharge chute or side discharge blower under the mulch plug hinge pin. 3. Lower the mulch plug securely in place. 4. Important: Do not remove the side mulch plug at any time during operation. By following these steps, you can ensure that the rear mulch plug is correctly installed and ready for mulching with your Troy-Bilt TB210B lawnmower.
To effectively mulch grass with the Troy-Bilt TB210B lawnmower, follow these steps: 1. Remove the grass catcher or side discharge chute from the mower. 2. Ensure the rear mulch plug is installed and allow the rear discharge door to close. 3. Avoid mulching wet grass or grass that has grown over four inches. 4. Use the grass catcher to collect clippings if the grass is too long for mulching. 5. Regularly lubricate pivot points on the blade control and wheel hubs/axles with light oil. 6. Check engine mounting bolts torque annually and refer to the Engine Operator’s Manual for engine maintenance. 7. Clean the engine before each use to prevent overheating and ignition of debris. 8. Use the deck wash system after each mowing session to rinse grass clippings from the deck's underside.
Yes, the manual of the Troy-Bilt TB210B is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Troy-Bilt and is the answer not in the manual?
Question and answer
Number of questions: 3had mower for just one year and now when i start it ,it want stay on,what could be the problem
recoil rope will not extend fully in start up attempt.
Is there a "trouble shooting" section to the manual?