Trotec TDS 75 manual

Trotec TDS 75
7.5 · 1
PDF manual
 · 22 pages
English
manualTrotec TDS 75
TRT-BA-TDS75-TDS100-TDS120-TC210914TTRT01-011-EN

TDS 75 / TDS 100 / TDS 120

EN
INSTRUCTIONS
ELECTRIC HEATER

Manual

View the manual for the Trotec TDS 75 here, for free. This manual comes under the category heaters and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Trotec TDS 75 or do you need help? Ask your question here

Need help?

Do you have a question about the Trotec and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Trotec TDS 75 specifications

Below you will find the product specifications and the manual specifications of the Trotec TDS 75.

General
BrandTrotec
ModelTDS 75
Productheater
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Trotec TDS 75 below.

What is the ideal room temperature?

Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.

What activities are required before starting maintenance for the Trotec TDS 75 heater?

Before starting maintenance for the Trotec TDS 75 heater, there are several activities that should be performed. Here are the steps: 1. Check the air inlets and outlets for any dirt or foreign objects. If necessary, clean them to ensure proper airflow. 2. Inspect the air inlet grid(s) for dirt and foreign objects. Clean them if needed to prevent any blockages. 3. Clean the exterior of the heater to remove any dust or debris that may have accumulated. 4. Visually check the inside of the device for any dirt or obstructions. If you notice any, clean the interior to maintain optimal performance. 5. Inspect the heater for any damage, such as cracks or loose parts. If you find any issues, address them accordingly. 6. Check the attachment screws to ensure they are securely fastened. 7. Perform a test run of the heater to verify that it is functioning properly. 8. Keep a maintenance and care log, noting the device type, device number, and the dates of each maintenance activity. 9. Follow any additional guidelines or regulations for the operation of electrical equipment in wet rooms. By following these steps, you can ensure that the Trotec TDS 75 heater is properly maintained and ready for use.

How do I handle the warning of electrical voltage for the Trotec TDS 75 heater?

When handling the warning of electrical voltage for the Trotec TDS 75 heater, it is important to follow these steps: 1. Before performing any work on the device, always remove the mains plug from the mains socket. 2. Avoid touching the mains plug with wet or damp hands. 3. Hold onto the mains plug while pulling the power cable out of the mains socket. 4. Be aware of the risk of electric shock if the heating device comes into contact with water in bathtubs, showers, or swimming pools. Therefore, do not use the heater in immediate proximity to these areas. 5. Take caution when working with electrical devices in damp areas and ensure that you have read and understood the safety instructions provided in the manual. 6. Only authorized specialist companies should carry out work on the electrical components of the device. 7. Do not make any unauthorized modifications, alterations, or structural changes to the device. 8. Keep in mind that the device is not a toy and should not be handled by children. By following these steps, you can safely handle the warning of electrical voltage for the Trotec TDS 75 heater.

What is the recommended method for cleaning the housing of the Trotec TDS 75 heater?

To clean the housing of the Trotec TDS 75 heater, follow these steps: 1. Ensure that the device is switched off and disconnected from the power source. 2. Use a soft, damp, and lint-free cloth to clean the housing. Avoid using aggressive cleaning agents, such as cleaning sprays, solvents, alcohol-based, or abrasive cleaners. 3. Gently wipe the housing, making sure that no moisture enters the device. Take extra care to protect the electrical components from moisture. 4. After cleaning, wipe the housing dry with a clean cloth. 5. Inspect the housing for any stubborn stains or dirt. If necessary, you can use a mild detergent solution on the cloth to remove them, but make sure to rinse the cloth thoroughly and wring it out before using it on the housing. 6. Pay attention to any specific cleaning instructions provided in the manual for the Trotec TDS 75 heater. 7. Once the housing is clean and dry, you can reconnect the device to the power source and resume normal operation. By following these steps, you can effectively clean the housing of the Trotec TDS 75 heater and maintain its appearance and performance.

What are the technical data specifications for the Trotec TDS 75 heater?

The technical data specifications for the Trotec TDS 75 heater are as follows: - Power output: 15 kW - Voltage: 400 V - Frequency: 50 Hz - Current consumption: 21.7 A - Air flow rate: 1,000 m³/h - Heating capacity: 12,900 kcal/h - Temperature rise: 70°C - Dimensions (L x W x H): 600 x 400 x 500 mm - Weight: 25 kg These specifications provide information about the power, voltage, frequency, current consumption, air flow rate, heating capacity, temperature rise, dimensions, and weight of the Trotec TDS 75 heater.

Where can I find the circuit diagram for the Trotec TDS 75 heater?

The circuit diagram for the Trotec TDS 75 heater can be found in the manual. Specifically, you can refer to page 11 or page 12 of the manual. These pages contain the circuit diagram for the TDS 75 heater. The circuit diagram provides a visual representation of the electrical connections and components of the heater, which can be useful for troubleshooting or understanding the internal workings of the device.

Is the manual of the Trotec TDS 75 available in English?

Yes, the manual of the Trotec TDS 75 is available in English .

Is your question not listed? Ask your question here

No results