TRENDnet TV-IP400W specifications

7.5 · 1
TRENDnet TV-IP400W specifications, prices, product images and videos.

TV-IP400W | TV-IP400W
Security camera
EN - 9 (PDF)
Maximum resolution640 x 480 pixels
Video formats supportedM-JPEG
Supported graphics resolutions320 x 288 (QVGA), 640 x 480 (VGA)
Supported video modes-
Frame rate30 fps
Minimum illumination2.5 lx
Tilt angle range-45 - 70 °
Pan range-156 - 156 °
White balanceAuto
Image sensor
Sensor typeCMOS
Optical sensor size1/4 "
Lens system
Optical zoom- x
Digital zoom4 x
Focal length range6 mm
Flash memory2 MB
Internal memory8 MB
Built-in HDD
Night vision
Night vision-
Form factor-
Product colourBlue
PTZ control
Placement supportedIndoor & outdoor
Connectivity technologyWired & Wireless
CertificationFCC, CE
Ethernet LAN
Cabling technology10/100Base-T(X)
Wi-Fi standards802.11b, 802.11g
Supported network protocolsHTTP, FTP, TCP/IP, UDP, ARP, ICMP, BOOTP, RARP, DHCP, PPPoE, DDNS, UPnP
Weight & dimensions
Weight300 g
Power over Ethernet (PoE)
Power consumption (typical)8 W
Other features
Power LED
Dimensions (WxDxH)117 x 115 x 105 mm
Compatible operating systemsWindows 98SE, ME, NT4, 2000, XP
Networking featuresEthernet
Operational conditions
Operating temperature (T-T)5 - 40 °C
Storage temperature (T-T)-25 - 50 °C
Operating relative humidity (H-H)5 - 95 %
System requirements
Minimum processorPentium III, 450 MHz
Minimum RAM128 MB
The Pan/Tilt IP Camera is a full-featured surveillance system that provides high quality video over a wireless network connection. Built-in CPU and Web Server allow the camera to function as a standalone device, allowing users to access the camera anywhere in the world by using a Web browser. Users can also move the camera remotely in almost any direction, scanning sensitive locations for unauthorized intrusion. The IP Camera comes with a CMOS sensor to deliver clear and crisp images, and its powerful IPView software gives users enhanced security options to archive streaming video straight to a computer´s hard drive. IP View software can also monitor multiple cameras on a single screen, enable motion detection to trigger automatic recording, and send email alert notification.