TOA ST-16A manual

TOA ST-16A
7.5 · 1
PDF manual
 · 2 pages
English
manualTOA ST-16A

ST-16ASPEAKER STAND

INSTRUCTION MANUAL

1. SAFETY PRECAUTIONS
Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
After reading, keep this manual handy for future reference.
2. HOW TO USE
Step 1. Attach the bracket to the speaker as shown below.
Attach the bracket to the speaker
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.

WARNING

Do not mount the speaker of 7 kg or more. The stand or its internal pipe may fall down or drop, resulting in
personal injury. Even though the speaker weight is below 7 kg, do not use that speaker if the stand is made
unstable.
• Do not extend the internal pipe beyond the MAXIMUM point marked in red. Doing so may make the stand
unstable, and cause the stand or its internal pipe to fall down or drop, resulting in personal injury.
Avoid installing the stand in the following locations. Otherwise, the mounted speaker may drop or the stand
may fall, resulting in personal injury.
· Doorway or other high traffic area where people may trip on the stand.
· Locations where the unit is exposed to a strong wind.
· Unstable locations, such as on a rickety table or a slanted surface.
Important: Even in locations other than the above, if the unit may fall down, take appropriate fall preventive
measures.
• When adjusting the stand height with the speaker mounted, hold the speaker firmly. Doing otherwise may
cause the stand to fall, resulting in personal injury and/or property damage.
Fully expand the legs. If the legs are not fully expanded, the stand may fall down, resulting in personal injury.
Attachment to the horn speaker Attachment to the megaphone Attachment to the FGM speaker
Butterfly nut
Washer
Hexagon bolt
Insert the hexagon bolt into the hexagonal
hole located inside the bracket and tighten
the bolt to attach the bracket.
Hexagon bolt
Insert the hexagon bolt into the hexagonal hole
located inside the bracket and tighten the bolt
rotating the bracket in the direction of the arrow
to secure the bracket.
Spacer
Be sure to use the spacer.
If not used, the thread in the
megaphone may be destroyed.
Note
Do not use this spacer for the
megaphones ER-2230W and
WR-2930W.
Speaker
mounting screw
Bracket
Bracket
Bracket

View the manual for the TOA ST-16A here, for free. This manual comes under the category Speaker supports and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the TOA ST-16A or do you need help? Ask your question here

Need help?

Do you have a question about the TOA and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other TOA owners to provide you with a good answer.

Number of questions: 0

Gas piston design allows 130mm of smooth, precise height adjustment so your display is always in the most comfortable po...
General
TOA
ST-16A | ST-16A
Speaker support
English
User manual (PDF)
Features
PlacementFloor
Maximum weight capacity7 kg
MaterialAluminium
Product colourSilver
Mounting typeFloor
Telescopic
Number of legs3 leg(s)
Rubber feet
Weight & dimensions
Height adjustment
Height (min)1130 mm
Height (max)1660 mm
Weight1700 g
Packaging content
Bolts included
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the TOA ST-16A below.

Is your question not listed? Ask your question here

No results