Teltonika TRB142 manual

Teltonika TRB142
5.2 · 1
PDF manual
 · 6 pages
English
manualTeltonika TRB142

TRB142*1****

Copyright © 2020, Teltonika Networks. Specifications and information given in this document are subject to change by Teltonika Networks without prior notice.

Manual

View the manual for the Teltonika TRB142 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 5.2. This manual is available in the following languages: English. Do you have a question about the Teltonika TRB142 or do you need help? Ask your question here

Need help?

Do you have a question about the Teltonika and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
J
Johan hiemstraSeptember 8, 2020

Dear sir/madame, I am experimenting with a Teltonika TRB142 (rs232 port) and want to use it in the Bidirect mode. Initial I want to connect to a Server which communicates transparently RS232 (8N1 115200 baud) no flowcontrol, with my application on the serial port. (Client settings of the TRB142= i.p. address, portnumber, reconnect interval: 60 sec., Server settings of the TRB142= TCP portnumber (=23), open port automatically. By means of portforwarding I configured to reach the LAN port 23 on 192.168.1.1 (LAN address TRB142) from port 23 of the WAN address. When I try to reach the serial port (23 of the WAN address) it does'nt succeed. When I only configure as Server (not Bidirect) then I succesfully can reach the serial port on port 43 on the WAN address. I did not yet test the client side, that is just an existing i.p. address from which I opened the specific port. I did the same experiment with the Teltonika RUT955 and then it just worked fine. There I succcesfully can communicate over the WAN adres/portnumber with the serial port of my device. What can be the cause I experience some problems with the Teltonika TRB142? My goal is that the my device permanent (serial) is connected to a TRB142 to a server. When I have to do some troubleshouting /serivcing with my device, I want to take over the connection from the server, which drops the client connection when I approach the server mode of the TRB142. Can you please help me? What am I doing wrong? When I succesfully can use the TRB142 for this purpose, probably we can use a lot of these devices. Our buisiness is controlling and guarding pump installations (Watermanagement). There are a lot of small installations who now communicate GSM data (CSD) and in the very nearby future have to be changed to I.P. based communication. With Kind Regards, Johan Hiemstra Software Engineer Landustrie Sneek B.V The Netherlands

Teltonika TRB142 specifications

Below you will find the product specifications and the manual specifications of the Teltonika TRB142.

The Teltonika TRB142 is a not categorized device with connectivity technology based on wired connections. It features an internal antenna and a processor model that operates at a frequency of 1200 MHz. The device is equipped with an antenna connector type of SMA and supports Linux operating systems. It also includes a SIM card slot for additional functionality. With a width of 60 millimeters, the Teltonika TRB142 is designed to be compact and versatile. Its internal components allow for seamless connectivity and reliable performance. The use of quality materials ensures durability and longevity for the device. Overall, the Teltonika TRB142 offers a combination of functionality and efficiency, making it suitable for a variety of applications. Its compact size and powerful processor make it a reliable option for those seeking a wired connectivity solution with the added benefit of Linux support and a SIM card slot.

General
BrandTeltonika
ModelTRB142 | TRB1420E0000
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF), Datasheet (PDF)
Ports & interfaces
Connectivity technologyWired
Host interfaceRS-232
Interface-
Design
InternalYes
AntennaYes
Product colorGreen
Antenna connector typeSMA
Network
Maximum data transfer rate- Mbit/s
Networking standards-
SIM card slotYes
Power
Output voltage9-30 V
Input current1 A
Other features
Processor modelYes
Processor frequency1200 MHz
System requirements
Linux operating systems supportedYes
Weight & dimensions
Width60 mm
Depth70 mm
Height18 mm
Weight50 g
Width60 mm
Depth70 mm
Height18 mm
Weight50 g
Operational conditions
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-45 - 80 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)5 - 95 %
Operating temperature (T-T)-40 - 75 °C
Storage temperature (T-T)-45 - 80 °C
Packaging data
Quantity1
Features
Product colorGreen
Linux operating systems supportedYes
Module typeDigital & analog
Signal directionInput/output
Channels quantity- channels
Serial interface typeRS-232
Input impedance50 Ω
Channel type-
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Teltonika TRB142 below.

What is the weight of the Teltonika TRB142?

The Teltonika TRB142 has a weight of 50 g.

What is the height of the Teltonika TRB142?

The Teltonika TRB142 has a height of 18 mm.

What is the width of the Teltonika TRB142?

The Teltonika TRB142 has a width of 60 mm.

What is the depth of the Teltonika TRB142?

The Teltonika TRB142 has a depth of 70 mm.

Does Teltonika TRB142 have an internal antenna?

Yes, Teltonika TRB142 has an internal antenna, which means users do not need to worry about attaching an external antenna for connectivity.

What is the processor frequency of Teltonika TRB142?

Teltonika TRB142 has a processor frequency of 1200 MHz, which is quite high compared to similar products, providing fast and efficient performance for users.

Does Teltonika TRB142 support Linux operating systems?

Yes, Teltonika TRB142 supports Linux operating systems, giving users flexibility and compatibility with a variety of software options.

How many SIM card slots does Teltonika TRB142 have?

Teltonika TRB142 has 1 SIM card slot, making it easy for users to stay connected with cellular network coverage.

What is the input current for Teltonika TRB142?

The input current for Teltonika TRB142 is 1 A, which is a standard amount for similar products, ensuring efficient power usage.

What should I do if the gateway does not boot up within 30 seconds as expected?

To troubleshoot if the Teltonika TRB142 gateway does not boot up within 30 seconds as expected, follow these steps: 1. Power on the device and connect the USB cable to your computer. 2. Allow the gateway to boot up, which may take up to 30 seconds. 3. Ensure that your computer's operating system detects the USB device and installs the drivers for the virtual NDIS network adapter. The IP address should be set automatically via DHCP. 4. Open a web browser and go to the address http://192.168.2.1. 5. Use the login information displayed in the provided image when prompted for authentication. 6. Pay attention to the Signal Strength indication in the Mobile widget after logging in. Adjust the antennas or relocate the device for optimal signal conditions. Remember, higher gain antennas can be connected to compensate for cable attenuation if needed.

What steps should I take if my computer's OS does not detect the USB device and install the drivers for the virtual NDIS network adapter?

1. Power on the device and connect the USB cable to your computer. 2. Allow the gateway to boot up, which may take up to 30 seconds. 3. Your computer's OS should automatically detect the USB device and install the drivers for the virtual NDIS network adapter. The IP address is configured via DHCP. 4. Open a Web browser and navigate to http://192.168.2.1. 5. Use the login credentials displayed in the provided image for authentication. 6. Pay attention to the Signal Strength indication in the Mobile widget after logging in. Adjust the antennas or relocate the device for optimal signal conditions. 7. Consider connecting a higher gain antenna if using a cable to compensate for cable attenuation, ensuring compliance with legal regulations.

Is the manual of the Teltonika TRB142 available in English?

Yes, the manual of the Teltonika TRB142 is available in English .

Is your question not listed? Ask your question here

No results