View the manual for the Teka EWH 80 C here, for free. This manual comes under the category water heaters & boilers and has been rated by 4 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Teka EWH 80 C or do you need help? Ask your question here

The Teka EWH 80 C is a water heater and boiler designed for indoor use. It has a vertical placement and features a tank system for water storage. With its combi boiler system, this product efficiently heats the water to your desired temperature. The EWH 80 C is equipped with a thermometer, allowing you to monitor and adjust the water temperature as needed. It also has an electronic power control feature, enabling precise temperature regulation. The on/off switch provides easy operation, allowing you to activate or deactivate the heater as required. Additionally, the Teka EWH 80 C supports solar batteries, making it an environmentally friendly option. Its water tank has a capacity of 80 liters, providing an ample supply of hot water. This water heater and boiler utilizes electric power as its fuel type, ensuring a convenient and cost-effective heating solution. With an International Protection (IP) code of IPX4, it is protected against water splashes from any direction, enhancing its safety. The AC input frequency of the EWH 80 C is 50 Hz, ensuring compatibility with most electrical systems. Its control type is rotary, allowing for easy adjustment of settings. Overall, the Teka EWH 80 C is a reliable and durable water heater and boiler that efficiently provides hot water in an indoor setting. Its various features make it a practical choice for those seeking a consistently warm water supply.
| Brand | Teka |
| Model | EWH 80 C | 111720003 |
| Product | water heater & boiler |
| EAN | 8434778012972 |
| Language | English |
| Filetype | User manual (PDF), Catalog (PDF), Datasheet (PDF) |
| Placement supported | Vertical |
| Type | Tank (water storage) |
| Boiler system | Combi boiler system |
| Heater location | Indoor |
| Product color | White |
| Solar batteries support | Yes |
| Water tank capacity | 80 L |
| Fuel type | Electric |
| International Protection (IP) code | IPX4 |
| Control type | Rotary |
| Input connection type | G 1/2 |
| Thermometer | Yes |
| Electronic power control | Yes |
| On/off switch | Yes |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Domestic Hot Water (DHW) flow | - l/min |
| Maximum power | 1500 W |
| Adjustable thermostat | Yes |
| Thermostat range | 30 - 75 °C |
| Temperature (max) | 75 °C |
| Noise level | 15 dB |
| Height | 805 mm |
| Width | 450 mm |
| Depth | 450 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Teka EWH 80 C below.
Most people find that the ideal room temperature is between 19 and 22 degrees Celsius.
The Teka EWH 80 C has a height of 805 mm.
The Teka EWH 80 C has a width of 450 mm.
The Teka EWH 80 C has a depth of 450 mm.
Yes, the Teka EWH 80 C supports vertical placement, providing flexibility in installation options.
Yes, the Teka EWH 80 C is a tank-type water heater, allowing for the storage of heated water.
No, the Teka EWH 80 C does not have a combi boiler system, which means that it does not provide both heating and hot water on demand. However, it can still efficiently heat water for various purposes.
Yes, the Teka EWH 80 C has a built-in thermometer, allowing users to easily monitor the temperature of the water.
Yes, the Teka EWH 80 C can be connected to solar batteries, making it an energy-efficient and environmentally friendly option for heating water.
The Teka EWH 80 C has a water tank capacity of 80 liters, providing an ample supply of hot water for various household needs.
Yes, the Teka EWH 80 C is fueled by electricity, offering convenience and ease of use.
The Teka EWH 80 C has an IPX4 code, indicating that it is protected against water splashes from any direction. This ensures its safe operation in areas with potential moisture exposure.
The AC input frequency of the Teka EWH 80 C is 50 Hz, which is the standard frequency for most electricity grids worldwide.
A10: Yes, the Teka EWH 80 C has an on/off switch, allowing users to easily control and conserve energy when the water heater is not in use.
A11: The Teka EWH 80 C has a rotary control, offering simplicity and ease in adjusting the water temperature to suit individual preferences.
A12: The Teka EWH 80 C has a maximum power of 1500 Watts, providing efficient heating capabilities for its water tank capacity.
To adjust the temperature settings on the Teka EWH 80 C water heater & boiler, follow these steps: 1. Make sure the water heater is connected to a power source and the inlet valve is open. 2. Locate the outlet valves at the outlet of the water heater. 3. Open any of the outlet valves to allow water to flow out. 4. Open the inlet valve to start filling the water heater with water. 5. Wait until water starts coming out of the outlet valve normally, indicating that the heater is fully filled with water. 6. Close the outlet valve. 7. Look for the temperature control system on the water heater. It may be a dial or a digital display. 8. Adjust the temperature setting according to your preference. Turn the dial or use the controls to increase or decrease the temperature. 9. Once you have set the desired temperature, the water heater will automatically maintain that temperature. 10. If you need to change the temperature in the future, repeat steps 7 and 8. Please note that if you encounter any issues or difficulties, it is recommended to contact a professional for assistance.
There could be several reasons why the Teka EWH 80 C water heater & boiler is not producing hot water. Here are some possible causes and their corresponding solutions: 1. Failure of the temperature control system: If the temperature control system is not functioning properly, it may prevent the water heater from heating the water. In this case, it is recommended to contact a professional for repair. 2. No water coming out of the hot water outlet: If there is no water flow from the hot water outlet, it could indicate a problem with the water supply or hydraulic pressure. Wait for the restoration of the running water supply or increase the hydraulic pressure. Also, ensure that the inlet valve for running water is open. 3. Water leak: If there is a water leak from the water heater, it can affect its performance. Check for any seal problems in the joints of each pipe and seal them properly. If you have tried these troubleshooting steps and the issue persists, it is advisable to seek assistance from a professional technician for further diagnosis and repair.
To properly clean and maintain the Teka EWH 80 C water heater & boiler, follow these steps: 1. Exterior Cleaning: Use water and soap to clean the exterior of the water heater. Avoid using abrasive products or solvents. 2. Water Hardness: Check the water hardness in your area. The recommended water hardness for optimal performance is not more than 120 mg/l of CaCo3 (Calcium Carbonate). If the water hardness exceeds this limit, consider using alternative decalcifying systems. 3. Inner Tank Cleaning: Regularly clean the inner tank and remove deposits from the heating components. This helps ensure long-term durability and efficiency of the water heater. 4. Magnesium Anode: Periodically check the magnesium anode, at least once a year or every six months depending on the water hardness. If the magnesium anode is worn out due to deposits, contact the After Sales Service for replacement. Note that the cost of labor or services for the replacement may not be included in the guarantee. 5. Surface Cleaning: Clean the surface of the water heater with soapy water. Avoid using abrasive products or solvents. Please note that during the guarantee period, maintenance should be performed by Teka's Official After Sales Service to ensure compliance with warranty terms. Services provided by non-Teka Official After Sales services may not be covered by the guarantee.
If the Teka EWH 80 C water heater & boiler is leaking, follow these steps: 1. Identify the source of the leak: Check for any visible signs of water leakage from the water heater. Inspect the joints and connections for any signs of water dripping or pooling. 2. Turn off the power supply: Locate the power switch or circuit breaker that controls the water heater and turn it off. This will ensure your safety while inspecting and addressing the leak. 3. Contact a professional: It is recommended to contact a professional technician or Teka's Official After Sales Service for repair. Leaks can be caused by various factors, such as faulty seals, damaged pipes, or internal component failures. A professional will be able to diagnose the issue accurately and provide the necessary repairs. 4. Do not attempt to repair it yourself: It is important to avoid attempting any repairs yourself, as it may lead to further damage or safety hazards. Let a qualified technician handle the repair to ensure proper and safe resolution of the leak. Remember, regular maintenance and inspections can help prevent leaks and ensure the optimal performance of your Teka EWH 80 C water heater & boiler.
If the Teka EWH 80 C water heater & boiler is making unusual noises, it could be due to various reasons. Here are some possible causes and solutions: 1. Sediment buildup: Over time, sediment can accumulate in the tank, causing the water heater to make popping or rumbling noises. To address this, perform regular maintenance by flushing the tank to remove the sediment buildup. Refer to the manual for specific instructions on how to flush the tank. 2. Loose components: Check for any loose components, such as pipes or fittings, that may be causing vibrations or rattling noises. Tighten any loose connections to eliminate the noise. 3. Expansion and contraction: The heating and cooling cycles of the water heater can cause the tank and pipes to expand and contract, resulting in creaking or ticking noises. This is normal and usually not a cause for concern. 4. Faulty heating element: If the noise is accompanied by a decrease in hot water supply, it could indicate a problem with the heating element. In this case, it is recommended to contact a professional technician for inspection and repair. If the unusual noises persist or if you are unsure about the cause, it is advisable to seek assistance from a qualified technician or Teka's Official After Sales Service for further diagnosis and resolution.
Yes, the manual of the Teka EWH 80 C is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Teka and is the answer not in the manual?
Question and answer
Number of questions: 1If I will be out of my home for 30 days. (In my city is the beginning of summer). Do I have to turn off the water heater to save and reduce the bill of electricity