Technoline WT 519 manual

Technoline WT 519
(2)
  • Number of pages: 2
  • Filetype: PDF
RADIO CONTROLLED CLOCK
WITH PROJECTOR
USER’S INSTRUCTIONS
GETTING STARTED
1. If using the DC Adaptor to power
the clock, plug the adaptor into
the left side of the clock. If using
battery, install 2 AA size
batteries into the battery
compartment, pay attention to
the polarity.
2. When the clock is power on, all
the segments of the LCD will be
shown briefly before entering the
radio controlled time reception
mode.
3. The RC clock will automatically
start scanning for the radio
controlled time reception mode.
Note:
1. If there is no display on the LCD
after inserting the battery, press
RESET key by using a metal pin.
Due to atmospheric disturbances,
the clock may not receive the
signal immediately, try to reset
the clock again during night time.
2. If using battery and DC Adaptor
at the same time, the unit will
automatically select the Adaptor
Power for both clock and
projector.
FUNCTION KEYS
SNOOZE/LIGHT key:
- Turn the projector and EL on.
Stop the current alarm when the
bell is ringing.
MODE key:
- Switch between normal time
mode and alarm time mode.
SET key:
- In normal time mode, toggle
between ºC/ºF temperature
format.
- In setting mode, step the setting
items.
ADJUST key:
- Toggle between Date/Month and
Year display.
- In alarm time mode, switch
ALARM/SNOOZE function on or
off.
- In setting mode, adjust the value
of the flashing digit.
RECEIVE key:
- Press it to receive the signal for
reception testing. If the signal is
in acceptable signal quality in the
first 30 seconds, leave the clock
there. Otherwise, place it in other
positions and press it again.
RESET key:
- In case of mal-function, use a pin
to press the RESET key to re-
start the clock.
FOCUS key:
- Adjust the clearness of the
projector.
PRODUCT DESCRIPTIONS
1. SNOOZE/LIGHT key
2. REVERSE key
3. LCD display
4. PROJECTOR
5. MODE key
6. SET key
7. ADJUST key
8. RECEIVE key
9. RESET key
10. DC adaptor
11. FOCUS key
12.Battery compartment
DISPLAY SYMBOLS
Normal time mode
1. Time
2. Month
3. Date
4. Day of the week
5. Temperature
6. Signal strength indicator
7. Daylight savings time
8. Low battery indicator
Alarm Time Mode
1. Alarm time
2. Alarm mode
3. Alarm icon
4. Snooze icon
ABOUT THE DAYLIGHT SAVING
TIME (DST)
The clock has been programmed to
automatically switch when daylight
saving time is in effect. Your clock
will show “DST” during the summer.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal
strength in 4 levels. Wave segment
flashing means time signals are
being received. The signal quality
could be classified into four types:
If the RC clock receives signal
successfully, a Sync-time symbol
”appears on LCD. The unit is
already synchronized with the time
signal transmitter. Otherwise the
antenna segment will disappear from
the LCD display.
Note:
You may use the RECEIVE button to
receive the time signal manually. The
receive mode will stop automatically
after 6-12minutes. Test mode
consumes more battery power that
may reduce battery lifetime.
Technoline WT 519

Need help?

Number of questions: 1

Do you have a question about the Technoline WT 519 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Technoline WT 519 owners to properly answer your question.

D N FENWICK, 9-11-2020 15:05:02 No comments

my wt519 constantly sets the time an hour fast

Answer this question

View the manual for the Technoline WT 519 here, for free. This manual comes under the category Clocks and has been rated by 2 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Technoline WT 519 or do you need help? Ask your question here

Technoline WT 519 specifications

General
Brand Technoline
Model WT 519
Product Clock
EAN 4029665005195
Language English
Filetype PDF
Technical details
Type Digital table clock
Form factor Rectangular
Product colour Black
Projection function Temperature,Time
Alarm clock
Snooze function
Thermometer
Calendar
Display
Backlight
Display type -
Weight & dimensions
Width 129 mm
Depth 34 mm
Height 92 mm
Power
Battery type AA R06 1.5 V
Number of batteries supported 2
Packaging content
Quantity per pack 1 pc(s)
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Technoline WT 519.

Is your question not listed? Ask your question here