Teac W-1200 manual

Teac W-1200
8.9 · 5
PDF manual
 · 96 pages
English
manualTeac W-1200
78

Reproducción repetida

Es posible escuchar repetidamente un intervalo determinado.

1 Durante la reproducción, pulse el botón REPEAT

en el punto en el que desee que comience el

intervalo de reproducción repetida.

aparecerá en la pantalla.

2 Pulse el botón REPEAT en el punto en el que

desee que nalice el intervalo de reproducción

repetida.

aparecerá en la pantalla.
La cinta se rebobinará automáticamente hasta el punto de
comienzo y empezará la reproducción, que continuará hasta el
punto de finalización. Al llegar a punto de finalización, la repro-
ducción se parará temporalmente, la cinta se rebobinará otra
vez hasta el punto de comienzo y se repetirá la reproducción
hasta el punto de finalización.
La reproducción repetida se detiene automáticamente después
de 20 repeticiones.
Pulse el botón de parada (
8
) para terminar la reproducción
repetida.
o Durante la reproducción repetida, solo se pueden utilizar los
botones REPEAT y STOP (8).
o Esta función no se puede utilizar para intervalos inferiores
a 10unidades del contador de cinta entre los puntos de
comienzo y finalización.
Con esta unidad se puede grabar en cintas de cassette el sonido de
dispositivos conectados a los terminales de entrada de línea.
Esta unidad puede grabar cintas normales (tipo I) y de cromo (tipo II).
o Esta unidad no admite la grabación en cintas de metal (tipo IV).
o Esta explicación describe cómo grabar en la CINTA 1 o la CINTA2
desde un dispositivo conectado. Esta unidad también tiene
funciones que permiten grabar una mezcla con el sonido intro-
ducido desde un micrófono (página81) y grabar en paralelo
en la CINTA1 y la CINTA2 al mismo tiempo (página84).

1 Ponga la cinta de cassette que vaya a grabar

en el compartimento.

o Cárguela con la cara que se vaya a grabar mirando hacia
delante.
o Si las lengüetas de prevención contra borrado de la cinta de
cassette cargada están quitadas, pegue un trozo de cinta
adhesiva sobre el agujero o agujeros.
2 Pulse el botón RECORD (0) para iniciar la gra-

bación en espera.

9 y aparecerán en la pantalla.
o Si desea grabar con el mando a distancia, pulse los dos
botones RECORD (0) del mando a distancia al mismo
tiempo.
o Pulse el botón de parada (8) para detener la grabación en
espera.

Grabar en cintas de cassette

Manual

View the manual for the Teac W-1200 here, for free. This manual comes under the category cassette players and has been rated by 5 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Teac W-1200 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Teac and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Teac W-1200 specifications

Below you will find the product specifications and the manual specifications of the Teac W-1200.

The Teac W-1200 is a cassette deck that features two decks for enhanced audio playback. With a built-in microphone and microphone input, it allows for convenient recording and playback options. It offers various I/O ports including USB 2.0 B, 6.3mm Out, RCA In, and RCA Out, allowing for versatile connectivity options. In terms of dimensions, the Teac W-1200 has a width of 435 millimeters, a depth of 285.8 millimeters, and a height of 145 millimeters. With a weight of 4600 grams, it is a relatively lightweight and compact device. The package also includes a remote control for seamless operation from a distance. This cassette player offers a 6.3mm headphone connectivity option, enabling users to enjoy private listening experiences. It comes equipped with a single 6.3mm headphone output. The Teac W-1200 offers multiple cassette playback modes, including forward, pause, repeat, and stop. These playback options provide flexibility and control over audio playback. In summary, the Teac W-1200 is a cassette deck with two decks, built-in microphone, and microphone input. It features various I/O ports such as USB 2.0 B, 6.3mm Out, RCA In, and RCA Out. With its compact dimensions of 435mm x 285.8mm x 145mm and weight of 4600g, it is a portable and lightweight device. Additionally, it includes a remote control for convenient operation and a 6.3mm headphone output for private listening. Its diverse cassette playback modes, including forward, pause, repeat, and stop, provide users with enhanced playback options.

General
BrandTeac
ModelW-1200 | W-1200-B
Productcassette player
EAN4907034221967
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Technical details
Device typeCassette deck
Number of decks2 deck(s)
Microphone inYes
I/O portsUSB2.0 B, 6.3mm Out, RCA In, RCA Out
Handheld remote controlYes
Cassette playback modesForward, Pause, Repeat, Stop
AutostopYes
Channels quantity2 channels
Cassette deck technologyLogic
Color
Product colorBlack
Audio
Built-in microphoneYes
Frequency range30 - 1500 Hz
Weight & dimensions
Width435 mm
Depth285.8 mm
Height145 mm
Weight4600 g
Display
Display type-
Ports & interfaces
Headphone connectivity6.3 mm
Headphone outputs1
Power
Power consumption (typical)22 W
Input voltage230 V
Input frequency50 Hz
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Teac W-1200 below.

What is the weight of the Teac W-1200?

The Teac W-1200 has a weight of 4600 g.

What is the height of the Teac W-1200?

The Teac W-1200 has a height of 145 mm.

What is the width of the Teac W-1200?

The Teac W-1200 has a width of 435 mm.

What is the depth of the Teac W-1200?

The Teac W-1200 has a depth of 285.8 mm.

How do I properly insert a cassette tape into the Teac W-1200?

Ensure that the cassette tape is properly aligned and flat, then gently insert it into the cassette slot of the Teac W-1200 until it clicks into place.

Why is my cassette tape not playing or producing any sound?

Make sure the cassette tape is properly seated in the tape deck and that it is not tangled or twisted. Also, check that the playback function is selected and the volume is turned up. If the issue persists, clean the tape heads with a head cleaning cassette to remove any dirt or debris.

How can I record audio from an external source using the Teac W-1200?

Connect your desired audio source (such as a microphone or another audio player) to the LINE IN jacks on the back of the Teac W-1200. Set the input selector to LINE and adjust the input level to an appropriate setting. Then, press the Record button and the Play button together to start recording.

How can I enhance the audio quality when recording with the Teac W-1200?

Ensure that the recording input level is properly adjusted to prevent distortion or clipping. Experiment with different recording levels until you achieve a balanced and clear sound. Additionally, using high-quality blank cassette tapes will contribute to better recording results.

Can I connect the Teac W-1200 to external speakers or headphones?

Absolutely! The Teac W-1200 has a built-in speaker, but you can also connect external speakers or headphones to the LINE OUT or HEADPHONES jack on the back of the unit for a more personalized listening experience.

Does the Teac W-1200 have a built-in microphone?

Yes, the Teac W-1200 has a built-in microphone. This means that the user can use the cassette player to record their own audio directly onto the cassette.

How many cassette decks does the Teac W-1200 have?

The Teac W-1200 has 2 cassette decks. This allows the user to play and record on separate decks, providing more versatility and convenience.

Can the Teac W-1200 be controlled remotely?

Yes, the Teac W-1200 comes with a remote control. This allows the user to control the cassette player from a distance, providing added convenience and ease of use.

What types of input and output ports does the Teac W-1200 have?

The Teac W-1200 has USB2.0 B, 6.3mm Out, RCA In, and RCA Out ports. This means that the user can connect the cassette player to other devices such as computers, speakers, and amplifiers for playback and recording.

Does the Teac W-1200 have autostop feature?

Yes, the Teac W-1200 has an autostop feature. This means that the cassette player will automatically stop playing or recording when the end of the tape is reached. This helps protect the cassette and prevents any damage from occurring.

Is the manual of the Teac W-1200 available in English?

Yes, the manual of the Teac W-1200 is available in English .

Is your question not listed? Ask your question here

No results