View the manual for the Taurus UB9.9 Touch here, for free. This manual comes under the category bicycle trainers and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Taurus UB9.9 Touch or do you need help? Ask your question here
| Brand | Taurus |
| Model | UB9.9 Touch |
| Product | bicycle trainer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Taurus UB9.9 Touch below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
To adjust the seat height on the Taurus UB9.9 Touch bicycle trainer, follow these steps: 1. Mount the saddle to the seat post using the provided tool. Hand-tighten the nuts to secure the saddle (refer to figs. 2-1 and 2-2 in the manual). 2. Pull the lock on the seat post towards the saddle and insert the seat post into the main frame of the bicycle trainer (refer to fig. 2-3 in the manual). Note: If the initial seat position does not meet your requirements, you can further adjust the height and lateral alignment of the seat. Please refer to figs. 2-3 and 2-4 in the manual for detailed instructions on how to make these adjustments. Please ensure that the seat is securely fastened before using the Taurus UB9.9 Touch bicycle trainer.
If the Taurus UB9.9 Touch bicycle trainer does not turn on, follow these steps: 1. Check the power connection: Ensure that the equipment is directly connected to a power outlet and not through a power board. Using a power board may result in insufficient power supply and technical errors. 2. Perform a software update: To ensure that your equipment has the latest software version, follow these steps: a. Tap "Settings" in the lower right corner of the screen. b. Tap "Wireless" and connect your bicycle trainer to the internet. c. Return to the settings. d. Tap "System and Apps" and go to updates. e. Tap "Update" to update the software. Do not use or switch off the equipment during the update. f. Check regularly for new updates by looking for a white icon on the display. If the issue persists after following these steps, please consult the Taurus UB9.9 Touch bicycle trainer manual for further troubleshooting or contact customer support for assistance.
To troubleshoot if the resistance levels are not working properly on the Taurus UB9.9 Touch bicycle trainer, follow these steps: 1. Check the training program: Ensure that you have selected the appropriate training program that allows manual adjustment of the resistance level. Some programs have pre-set resistance levels that cannot be manually changed. 2. Adjust the resistance manually: During your training session, you can manually adjust the resistance level by using the controls on the console. Increase or decrease the resistance level according to your desired intensity. 3. Restart the trainer: If the resistance levels are still not working properly, try restarting the Taurus UB9.9 Touch bicycle trainer. Turn off the power, wait for a few seconds, and then turn it back on. This can help reset any temporary glitches. 4. Update the software: Ensure that your trainer has the latest software version installed. Check for software updates in the settings menu and perform the update if available. This can address any software-related issues that may affect the resistance levels. If the issue persists after following these steps, please consult the Taurus UB9.9 Touch bicycle trainer manual for further troubleshooting or contact customer support for assistance.
If the Taurus UB9.9 Touch bicycle trainer makes unusual noises during operation, you can follow these steps to troubleshoot the issue: 1. Check for loose components: Inspect the pedals, handlebar, and saddle for any loose screws or connections. Tighten them firmly if necessary. 2. Ensure the equipment is level: If the trainer wobbles during use, it may not be properly leveled. Adjust the feet of the equipment to ensure stability. 3. Verify cable connections: If the display is blank or not working, check for any loose cable connections. Ensure that all cables are securely connected. 4. Eliminate sources of interference: If the pulse display is not working, it may be due to sources of interference in the room. Keep the trainer away from devices like mobile phones, Wi-Fi routers, and vacuum cleaners. Use a suitable chest strap and check if the batteries need to be replaced. If the issue persists or if you encounter other faults, please consult the Taurus UB9.9 Touch bicycle trainer manual for further troubleshooting or contact your contract partner for assistance.
To properly clean and maintain the Taurus UB9.9 Touch bicycle trainer, follow these steps: 1. Wipe down the surfaces: After each use, use a clean, damp cloth to wipe down the surfaces of the trainer, including the frame, handlebars, and console. This will remove any sweat or dirt that may have accumulated during your workout. 2. Clean the pedals and crank arms: Use a soft brush or cloth to clean the pedals and crank arms. Remove any debris or dirt that may have accumulated. Avoid using harsh chemicals or abrasive materials that could damage the surfaces. 3. Lubricate moving parts: Regularly lubricate the moving parts of the trainer, such as the pedals and resistance mechanism, with a silicone-based lubricant. This will help ensure smooth and quiet operation. 4. Check and tighten bolts: Periodically check all bolts and screws on the trainer to ensure they are tight and secure. If any are loose, use the appropriate tools to tighten them. 5. Store in a dry and clean area: When not in use, store the trainer in a dry and clean area to prevent dust and moisture buildup. Avoid storing it in direct sunlight or extreme temperatures. By following these maintenance steps, you can keep your Taurus UB9.9 Touch bicycle trainer in optimal condition for long-lasting use.
Yes, the manual of the Taurus UB9.9 Touch is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Taurus and is the answer not in the manual?
Question and answer
Number of questions: 0