View the manual for the Taurus IC70 Pro here, for free. This manual comes under the category bicycle trainers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Taurus IC70 Pro or do you need help? Ask your question here
| Brand | Taurus |
| Model | IC70 Pro |
| Product | bicycle trainer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Taurus IC70 Pro below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
To adjust the seat height on the Taurus IC70 Pro bicycle trainer, follow these steps: 1. Slide the vertical seat post (part number 10) into the seat post housing of the main frame (part number 16). 2. Align the vertical seat post to the desired height. 3. Attach the L shape knob (part number 26) to secure the seat post in place. 4. Slide the Seat Post (part number 12) onto the vertical seat post and align it to the desired position. 5. Secure the seat post to the vertical seat post using the L shape knob (part number 19) and the bolt (part number 68). 6. Finally, fix the Seat (part number 13) to the Seat Post (part number 12) and tighten the screws under the seat. Please note that the L shape knob audibly engages in one of the adjustment holes, so make sure it is securely fastened.
If the LCD display on your Taurus IC70 Pro bicycle trainer is not showing any data, you can try the following steps to troubleshoot the issue: 1. Check the power source: Ensure that the bicycle trainer is properly connected to a power outlet or that the batteries are inserted correctly. 2. Verify the display settings: Press the MODE/RESET button on the console to cycle through the parameters and check if any specific parameter is selected for display. If necessary, select the desired parameter using the SET button. 3. Reset the values: Press and hold the MODE/RESET button for approximately 2 seconds to reset all values on the display. 4. Check the sensor connection: Ensure that any required sensors, such as a chest strap for heart rate monitoring, are properly connected to the bicycle trainer. 5. Contact customer support: If the issue persists, it is recommended to contact Taurus customer support for further assistance and troubleshooting. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model and configuration of your Taurus IC70 Pro bicycle trainer.
To connect your smartphone to the Taurus IC70 Pro for virtual training, follow these steps: 1. Ensure that your smartphone has Bluetooth functionality and is compatible with the Taurus IC70 Pro. 2. Place your smartphone within a reasonable distance from the bicycle trainer. 3. Turn on the Bluetooth feature on your smartphone. 4. On the Taurus IC70 Pro console, navigate to the settings or connectivity menu. 5. Select the option to pair or connect a device. 6. On your smartphone, search for available Bluetooth devices and select the Taurus IC70 Pro from the list. 7. Follow any on-screen prompts or enter a PIN if required to complete the pairing process. 8. Once the pairing is successful, your smartphone should be connected to the Taurus IC70 Pro. 9. Open your preferred virtual training app or software on your smartphone. 10. Select the Taurus IC70 Pro as the connected device within the app. 11. Follow the instructions within the app to start your virtual training session. Please note that the specific steps may vary depending on your smartphone model and the virtual training app you are using.
If the resistance is not changing when you adjust the resistance level on the Taurus IC70 Pro bicycle trainer, you can try the following steps: 1. Locate the emergency brake and tension control knob on the bicycle trainer. It is labeled as "emergency brake & tension control knob" and is typically located near the handlebars or console. 2. To increase the resistance, turn the emergency brake and tension control knob to the right. 3. To decrease the resistance, turn the emergency brake and tension control knob to the left. 4. If the resistance still does not change, check if the emergency brake function is engaged. This function allows you to bring the flywheel to a standstill in emergency situations. Firmly press down on the emergency brake and tension control knob to activate the emergency brake. If you have followed these steps and the resistance is still not changing, it is recommended to contact Taurus customer support for further assistance and troubleshooting.
To properly clean and maintain the braking system of the Taurus IC70 Pro bicycle trainer, follow these steps: 1. Lubricate the felt brake: Regularly lubricate the felt brake with silicone oil or silicone spray. Apply one to two drops of lubricant to the flywheel and rotate the flywheel for two turns. 2. Clean the equipment: After each training session, clean the equipment with a damp towel. Avoid using solvents and only use a damp towel to wipe down the plastic covers and display console. 3. Inspect screws and cable connections: Regularly inspect the screws and cable connections to ensure they are secure. Tighten any loose screws as necessary. 4. Check moisture of the felt brake: Monitor the moisture level of the felt brake and lubricate it more often if the equipment is used frequently. 5. Perform routine maintenance: Follow the maintenance and inspection calendar provided in the manual. This includes cleaning the display console and inspecting plastic covers on a weekly basis, among other tasks. Please note that these steps are general guidelines for cleaning and maintaining the braking system of the Taurus IC70 Pro. For more specific instructions or if you encounter any issues, it is recommended to consult the Taurus customer support or refer to the manual for detailed information.
Yes, the manual of the Taurus IC70 Pro is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Taurus and is the answer not in the manual?
Question and answer
Number of questions: 0