Synology MR2200AC manual

Synology MR2200AC
7.7 · 1
PDF manual
 · 43 pages
English
manualSynology MR2200AC

16 Chapter 6: Enhance Connection Security

Create Firewall Rules

Firewall rules lter external IPv4 and IPv6 access to your Synology Router based on the specied conditions
(e.g. ports and source IP addresses). With rewall rules, you can ne-tune security policies for better care of your
Synology Router.
To create rewall rules on general trac, go to
Network Center > Security > Firewall.
To modify Internet access policies on SRM services/packages, go to Network Center > Security > Service.
Note: Firewall rules can apply to trac from WAN to LAN or from WAN to SRM.

External Access Restriction

This function allows external access to SRM via the HTTP/HTTPS ports (e.g. 8000/8001). External access via
other ports will be denied.
To enable this function, go to
Control Panel > System > SRM Settings and select Allow external access to
SRM.
Note: For security reasons, if you enable this option and disable it later, your Synology Router will deny all external
access even via the HTTP/HTTPS ports.

Enforce Auto Block

Auto block automatically blocks certain IP addresses with too many failed login attempts. Such IP addresses will
be identied as a source of potential malicious attacks that try to nd out the password.
To enable auto block, go to Network Center > Security > Auto Block.

Create Certicates

Creating a certicate from your Synology Router is equal to issuing a certied ID. If you import the certicate (a
.crt le) to another device (e.g. your mobile phone), your Synology Router can identify and communicate with the
device via a secured connection (e.g. HTTPS or SSL).
You can also import a certicate from a certicate authority so that your Synology Router can access another
server.
To create or manage the certicate, go to
Control Panel > Services > Certicate.

Use More Security Measures

More security measures are available to ne-tune SRM security policies at Network Center > Security >
General. There you can set up a logout timer, help your browser skip IP checking, and do much more.
You are also recommended to use Security Advisor, an SRM security application that scans your SRM settings
and Synology Router. Security Advisor will check your settings and recommend changes that help keep your
Synology Router safe.

Manual

View the manual for the Synology MR2200AC here, for free. This manual comes under the category routers and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Synology MR2200AC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Synology and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
A
AndrewFebruary 15, 2021

How to attach a network switch to get more ports on MR2200ac

K
Kathryn M MontgomeryMarch 24, 2023

I cannot find instructions on how to set up networks for my family's devices, i.e. kids, adults, kids at night time etc. Help, the manual does not seem to cover this.

Synology MR2200AC specifications

Below you will find the product specifications and the manual specifications of the Synology MR2200AC.

The Synology MR2200AC is a router equipped with Ethernet WAN connectivity for seamless networking. It does not have a SIM card slot, and it does not support 3G or 4G connections. The router offers high-speed WLAN data transfer rates of up to 867 Mbit/s across all three bands. The first, second, and third bands all have a maximum transfer rate of 867 Mbit/s, while the third band specifically has a transfer rate of 400 Mbit/s. In addition to WAN connectivity, the MR2200AC also features Ethernet LAN ports, allowing for wired connections to devices such as computers, gaming consoles, or smart TVs. The device is designed with reliability and durability in mind, utilizing premium materials in its construction to ensure long-lasting performance. Its custom-fit design enables optimal placement in various car models, maximizing the subwoofer's ability to deliver deep and powerful bass. In summary, the Synology MR2200AC is a versatile router with Ethernet WAN connectivity and high-speed WLAN data transfer capabilities. While it lacks SIM card and 3G/4G support, it provides reliable performance for both wired and wireless networking needs. The router's design prioritizes durability and ensures a custom-fit installation, offering enhanced bass performance for select vehicles.

General
BrandSynology
ModelMR2200AC | MR2200AC
Productrouter
EAN0846504003013, 0846504003211, 4711174723010
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
WAN connection
Ethernet WANYes
DSL WAN-
SIM card slotNo
3G/4G USB modem compatibility-
WAN connection typeRJ-45
Mobile network
3GNo
4GNo
Short Message Service (SMS)Yes
Mobile network generation-
5GNo
Wireless LAN features
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)867 Mbit/s
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
WLAN data transfer rate (first band)867 Mbit/s
WLAN data transfer rate (second band)867 Mbit/s
WLAN data transfer rate (third band)400 Mbit/s
Network
Ethernet LANYes
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN data rates1000 Mbit/s
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11v
Port forwardingYes
Dynamic DNS (DDNS)Yes
VPN tunnels quantity4
Ports & interfaces
USB portYes
Ethernet LAN (RJ-45) ports1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
Memory card slot(s)No
Security
MAC address table64 entries
Guest accessYes
DMZ supportYes
Security algorithmsIPSec
FirewallYes
MAC address filteringYes
DoS attack preventionYes
FilteringYes
Management features
Wake-on-LAN readyYes
Web-based managementYes
Reset buttonYes
Quality of Service (QoS) supportYes
WPS push buttonYes
Protocols
DHCP clientYes
DHCP serverYes
Universal Plug and Play (UPnP)Yes
Antenna
Internal
Design
Product typeTabletop router
Product colorBlack
On/off switchYes
Features
Built-in processorYes
Processor frequency717 MHz
Processor cores4
CertificationFCC\nCE\nBSMI\nVCCI Class B\nRCM\nKC\niDA\nTELEC\nJATE\nIC
Power
Power source typeAC
Power consumption (typical)12.95 W
AC input frequency50 - 60 Hz
AC input voltage100 - 240 V
Weight & dimensions
Width199 mm
Height154 mm
Weight450 g
Depth65 mm
Operational conditions
Operating temperature (T-T)5 - 40 °C
Storage temperature (T-T)-20 - 60 °C
Operating relative humidity (H-H)5 - 95 %
Packaging data
Number of products included1 pc(s)
Packaging content
AC adapter includedYes
Quick installation guideYes
Cables includedLAN (RJ-45)
Certificates
Yes
Logistics data
Harmonized System (HS) code85176990
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Synology MR2200AC below.

What is the difference between a router and a modem?

A modem provides the internet connection via the internet provider. A router then distributes the Internet signal to the devices connected to the router.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

Is WIFI radiation harmful?

WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health.

What is the weight of the Synology MR2200AC?

The Synology MR2200AC has a weight of 450 g.

What certifications does the Synology MR2200AC have?

The Synology MR2200AC has the following certifications: FCC\nCE\nBSMI\nVCCI Class B\nRCM\nKC\niDA\nTELEC\nJATE\nIC.

What is the height of the Synology MR2200AC?

The Synology MR2200AC has a height of 154 mm.

What is the width of the Synology MR2200AC?

The Synology MR2200AC has a width of 199 mm.

What is the depth of the Synology MR2200AC?

The Synology MR2200AC has a depth of 65 mm.

Why can't I connect to the internet using my Synology MR2200AC router?

First, let's check if all the cables are securely connected to the router and your modem. Then, make sure your router's power LED is solid green, indicating it has successfully boot up. If the issue persists, try power cycling your modem and router by unplugging them for a few seconds, then plugging them back in.

How can I change the default Wi-Fi network name (SSID) and password for my router?

To update your Wi-Fi network name and password, you need to access your router's web interface. Open your preferred web browser and enter "http://router.synology.com" in the address bar. Log in with your router's admin credentials and navigate to the "Wi-Fi" settings. From here, you can modify the SSID (network name) and set a new password for improved security.

Can I set up a guest network on my Synology MR2200AC router?

Absolutely! Creating a guest Wi-Fi network is a great way to provide internet access to your visitors while keeping your main network secure. Simply log in to your router's web interface, go to "Wi-Fi," and select "Guest Network." From there, you can choose the network name, security options, and set an optional password for your guest network.

How do I prioritize bandwidth for specific devices or applications on my Synology router?

To prioritize certain devices or applications, you can enable Quality of Service (QoS) settings on your router. Access the router's web interface, go to "Traffic Control," and select "QoS." From here, you can allocate specific bandwidth limits or prioritize traffic based on applications, device IP addresses, or MAC addresses.

Is it possible to set up parental controls to manage internet access for certain devices?

Absolutely! The Synology MR2200AC router offers robust parental control features. Access the router's web interface, navigate to "Security," and click on "Parental Control." You can create profiles for individual devices, set web filtering rules, schedule internet access times, and even monitor browsing history. This allows you to manage and restrict internet access for specific devices, ensuring a safe online environment for your family.

Does the Synology MR2200AC have an Ethernet WAN?

Yes. This means that users can connect the router directly to their internet service provider's modem via Ethernet for stable and reliable internet connectivity.

Is there a SIM card slot in the Synology MR2200AC?

No. The absence of a SIM card slot indicates that the router cannot be used with mobile data networks and relies solely on wired or wireless connections.

Does the Synology MR2200AC support 3G connectivity?

No. Users cannot establish a 3G connection directly through the router. However, they can connect 3G-enabled devices to the router via Wi-Fi or Ethernet.

Can the Synology MR2200AC connect to 4G networks?

No. This router does not have built-in support for 4G connections. Users can only connect to the internet through wired Ethernet or Wi-Fi networks.

What is the maximum WLAN data transfer rate of the Synology MR2200AC?

The maximum WLAN data transfer rate for all bands is 867 Mbit/s, except for the third band, which offers a slightly lower speed of 400 Mbit/s. This makes the router suitable for high-speed internet activities and smooth data transmission between devices. It is on par with or exceeds the speeds offered by many comparable routers.

Is the manual of the Synology MR2200AC available in English?

Yes, the manual of the Synology MR2200AC is available in English .

Is your question not listed? Ask your question here

No results