Synology DiskStation DS218play manual

Synology DiskStation DS218play
8.4 · 7
PDF manual
 · 73 pages
English
manualSynology DiskStation DS218play
Synology NAS User's Guide
Based on DSM 6.1
30 Chapter 5: Manage Storage Space

Manage iSCSI Targets

Go to Storage Manager and click the iSCSI Target tab to manage iSCSI Targets on your Synology NAS. The
maximum number of iSCSI Targets varies depending on the model. For more information, please refer to
Manage iSCSI LUNs”.

Manage iSCSI LUNs

An iSCSI LUN (logical unit number) represents an individually addressable portion of an iSCSI Target. An iSCSI
LUN can be mapped to multiple iSCSI Targets to perform storage operations such as read or write.
Go to Storage Manager and click the iSCSI LUN tab to manage iSCSI LUNs on your Synology NAS. The
maximum number of iSCSI LUNs varies depending on the model. Detailed product specifications can be found
on our website: www.synology.com.

Clone iSCSI LUNs

LUN Clone
1
allows you to create near-instantaneous virtual copies of a LUN. It means much higher productivity
and less complex deployment during system-wide operations. LUN Clone also consumes only a fraction of
storage at the time of creation.
Go to Storage Manager and click the Clone button to make a writable copy of an iSCSI LUN or an iSCSI LUN
snapshot

Take iSCSI LUN Snapshots

LUN Snapshot
1
allows you to create up to 256 snapshots per LUN using point-in-time technology without having
any impact to system performance. It is efficient for your valuable storage space and also increases the level of
protection, letting you easily recover valuable data.
Go to Storage Manager and click the Snapshot button to take iSCSI LUN snapshots.

Manage Hard Disks

The HDD/SSD tab allows you to monitor the status of the hard disks installed in your Synology NAS, providing
options to manage and analyze hard disk performance and health. To see this tab, go to Storage Manager and
click HDD/SSD. For more detailed instructions, please see DSM Help.

Enabling Write Cache Support

Enabling write cache support enhances the performance of your Synology NAS. Only certain hard disk models
support this feature. To ensure data protection while using write cache support, usage of a UPS device is
strongly recommended. We also suggest the system be shut down properly every time after use. Disabling write
cache will reduce the chances of data loss caused by abnormal power outages, but system performance will
decline.

Running S.M.A.R.T. Tests

Disk S.M.A.R.T. tests examine and report the status of your hard disk, alerting you to possible disk failures. We
recommended promptly changing your disk if any errors are detected. S.M.A.R.T. tests can also be scheduled to
run automatically by creating tasks.

Checking Disk Info

The Disk Info section displays a hard disk's model name, serial number, firmware version, and total size.
---------
1
LUN Clone and Snapshot are only available on specific models.

Manual

View the manual for the Synology DiskStation DS218play here, for free. This manual comes under the category servers and has been rated by 7 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Synology DiskStation DS218play or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Synology and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
A
Anja TimmersDecember 14, 2021

I see that for some time my folders on the NAS are locked. How can I unlock them?

I see that for some time my folders on the NAS are locked. How can I unlock them?
zoom-in
View photo
This message has been automatically translated
H
HolmesJune 10, 2020

How to open the case

1 comment
M
Matthew GroseDecember 5, 2020

How can I download the Synology DS218 Play user manual without also downloading 3rd party software (other than Adobe reader) to view it? (The cute little cheery girly voice does NOT help me feel confident about that app, BTW.)

H
henkApril 19, 2022

can I download the manual as a pdf file?

Synology DiskStation DS218play specifications

Below you will find the product specifications and the manual specifications of the Synology DiskStation DS218play.

The Synology DiskStation DS218play is a server that offers a range of features for storage and data management. Its total installed storage capacity is 0 terabytes, meaning that users need to install storage drives separately. The power supply location is external, with a single power supply unit (PSU) capacity of 60 watts. This server supports RAID levels 0, 1, and JBOD, providing different options for data redundancy and storage performance. However, no storage drives are installed by default, and the specific installed storage drive type is not mentioned. The DS218play supports two storage drives in total, allowing for flexible storage expansion. In terms of compatibility, this server supports various file systems such as FAT, HFS+, NTFS, exFAT, ext3, and ext4. Users can choose the file system that suits their needs best. Moreover, the DS218play offers RAID support, ensuring data protection through redundancy or striping. While specific details regarding the performance and connectivity options of this server are not provided, it is clear that the DS218play is designed to handle storage and data management tasks. With its support for multiple storage drives and various RAID configurations, it offers flexibility and reliability to users. However, to fully evaluate its capabilities and potential benefits, more information about its performance and additional features would be required.

General
BrandSynology
ModelDiskStation DS218play | DS218PLAY
Productserver
EAN0846504002887, 4711174722884, 4537694252706
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Datasheet (PDF)
Storage
Total installed storage capacity0 TB
RAID levels0, 1,JBOD
Storage drives installedNo
Installed storage drive typeNo
Number of storage drives installed0
Supported storage drive typesHDD & SSD
Number of storage drives supported2
Storage drive interface-
Hot-swap drive bays-
Supported file systemsFAT, HFS+, NTFS, exFAT, ext3, ext4
Storage drive size- "
RAID supportYes
Storage drive capacity0 GB
Storage drive sizes supported2.5, 3.5 "
Supported storage drive interfacesSerial ATA, Serial ATA II, Serial ATA III
Power
Power supply locationExternal
Power supply unit (PSU) capacity60 W
Number of power supply units1
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)16.79 W
Power consumption (HDD standby)5.16 W
Processor
Processor modelRTD1296
Processor familyRealtek
Processor frequency1.4 GHz
Processor cores4
Processor manufacturerRealtek
Weight & dimensions
Width100 mm
Depth225.5 mm
Height165 mm
Weight870 g
Packaging content
External power adapterYes
Cables includedAC, LAN (RJ-45)
Quick installation guideYes
Memory
Internal memory typeDDR4
Internal memory1 GB
ECCNo
Network
Ethernet LANYes
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
iSCSI supportYes
Wake-on-LAN readyYes
Ports & interfaces
Ethernet LAN (RJ-45) ports1
USB portYes
USB 2.0 ports quantity0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
Fiber ports quantity0
Design
Chassis typeDesktop
Cooling typeActive
Product colorBlack
Number of fans1 fan(s)
Fan diameter92 mm
LED indicatorsYes
Performance
TypeNAS
Device classHome & Home Office
Backup functionYes
Access Control List (ACL)Yes
On/off switchYes
Noise level19.9 dB
Software
Operating system installed-
Operational conditions
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Storage temperature (T-T)-20 - 60 °C
Technical details
Sustainability certificatesRoHS
Other features
Yes
Logistics data
Harmonized System (HS) code84714100
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Synology DiskStation DS218play below.

What is the weight of the Synology DiskStation DS218play?

The Synology DiskStation DS218play has a weight of 870 g.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

What is the height of the Synology DiskStation DS218play?

The Synology DiskStation DS218play has a height of 165 mm.

What is the width of the Synology DiskStation DS218play?

The Synology DiskStation DS218play has a width of 100 mm.

What is the depth of the Synology DiskStation DS218play?

The Synology DiskStation DS218play has a depth of 225.5 mm.

Why is my Synology DiskStation DS218play not powering on?

Ensure that the power cable is securely connected to the DiskStation and the power source. If there is still no power, check if the power outlet is functional by trying a different device. If the issue persists, it could indicate a hardware problem, and you may need to contact technical support.

How can I access my DiskStation remotely?

To access your DiskStation remotely, you need to enable QuickConnect or set up port forwarding on your router. QuickConnect allows you to access your DiskStation by simply using your Synology Account credentials. Alternatively, port forwarding allows you to manually configure your router to forward incoming network traffic to your DiskStation's IP address.

Why am I unable to connect to my DiskStation over the network?

If you are unable to connect to your DiskStation over the network, check if the network cable is properly connected to both your DiskStation and your router or switch. Also, ensure that the DiskStation and your computer are on the same subnet and have appropriate IP addresses. If the issue persists, restarting your DiskStation and checking your network settings may help resolve the problem.

How can I expand the storage capacity of my DiskStation?

To expand the storage capacity of your DiskStation, you can connect additional hard drives or upgrade the existing ones. The DS218play supports up to two internal hard drives, allowing you to increase storage capacity by adding larger drives or configuring them in RAID arrays. You can manage and configure the storage expansion through the Synology DiskStation Manager (DSM) interface.

What should I do if my DiskStation encounters data corruption?

If your DiskStation experiences data corruption, it is crucial to have a backup solution in place to minimize potential data loss. Synology provides various backup apps that allow you to schedule regular backups of your important files and folders on external drives, remote servers, or cloud storage services. In case of data corruption, you can restore your files from the backup to recover your data.

Does the Synology DiskStation DS218play come with any installed storage drives?

No, the Synology DiskStation DS218play does not come with any installed storage drives.

What types of storage drives are supported by the Synology DiskStation DS218play?

The Synology DiskStation DS218play supports both HDD and SSD storage drives.

What RAID levels are supported by the Synology DiskStation DS218play?

The Synology DiskStation DS218play supports RAID levels 0, 1, and JBOD.

What is the power supply capacity of the Synology DiskStation DS218play?

The power supply capacity of the Synology DiskStation DS218play is 60 Watts.

What is the processor family and model of the Synology DiskStation DS218play?

The Synology DiskStation DS218play belongs to the Realtek processor family and its model is RTD1296.

Is the manual of the Synology DiskStation DS218play available in English?

Yes, the manual of the Synology DiskStation DS218play is available in English .

Is your question not listed? Ask your question here

No results