1. Home
  2. Televisions
  3. Sylvania
  4. 6260VE

Sylvania 6260VE manual

Sylvania 6260VE
(1)
  • Number of pages: 8
  • Filetype: PDF
Owner’s Manual
Video Cassette Recorder

6260VE

If you need additional operating assistance afterreading this owner’s manual or to order replace-ment accessories, please call TOLL FREE : 1-800-968-3429or visit our web site athttp://www.SylvaniaConsumerElectronics.com

1. Before using your VCR

If channel 3 is already occupied for broadcasting,1) Set your TV to channel 4.2) Insert a pre-recorded tape into the VCR.3) Press the PLAY button once.
4) After a few seconds, press the PLAY button on the VCR for 3 seconds.
•
The RF output channel will change to channel 4 from channel 3 and youwill see a playback picture.
•
When a picture does not appear on the TV screen, repeat step [4].5) Press the STOP button to stop playback.
ANT
IN
OUT
RF Cable (supplied)(Back of VCR)(Back of TV)(Back of TV)Plug the AC power cords of the VCR and TV into the AC outlets.
4
DisconnectAntenna
or
2
Connect
3
ConnectCableSignalAntenna
or
CableSignal
Hint
Hint
• The RF output channel may notchange when you adjust track-ing during playback. In this case,stop the playback, and start theplayback again. After that, pressthe PLAY button on the VCR for3 seconds again.Basic VCR/TV ConnectionRF Output ChannelSelect this connection when you want to view or record ascrambled channel.With this connection, channels cannotbe changed on the VCR. You can view or record ONLY thechannels you have selected on the cable box or the satellite
box.
• While you are recording, only the recorded channelcan be viewed.
T
o select channels of the cable box or satellite box1) Turn on the VCR by pressing the POWER button, andthen, press the VCR/TV button.The POWER and theVCR/TV indicators on the front panel will light on.Then, press the CHANNEL buttons to select channel 3or 4 (the same channel as the output channel of thecable box or satellite box).• If you use the channel 4, you need to change theVCR’s RF output to channel 4. Refer to “RF OutputChannel”.2) At the TV, select channel 3 or 4 (the same channel asyou have selected at step 1).3) At the cable box or satellite box, select the channel youwant to view or record.Select this connection when you want to change channelson the VCR. With this connection, you may watch onechannel while recording another.• You may not view or record a scrambled channel.
T
o select channels of the cable box1) At the cable box, select channel 3 or 4 (the samechannel as the VCR’s RF output channel.)• Refer to “RF Output Channel”.2) At the TV, select the same channel as the output chan-nel (3 or 4) of the cable box.3) Turn on the VCR by pressing the POWER button, thenpress the VCR/TV button. The POWER and VCR/TVindicators on the front panel will light on. Then, selectthe channel you want to view or record.
T
o play back a tapeFollow the steps 1) to 2) above. Then, play back a tape.• Refer to “Playback” on page 5.
T
o view one channel while recording another
1)
While you are recording on the VCR, press the VCR/TVbutton so that the VCR/TV indicator disappears on the
VCR.
2) At the cable box, select the channel you want to view.Hint for Cable Box or Satellite Box
ANT
IN
OUT
RF Cable

(supplied)

(Back of VCR)
IN
O
U
T
E
(Back of TV)Cable Signal

Connection A

(Cable box or Satellite box)

- 1 -

ANT
IN
OUT
RF Cable (supplied) RF Cable(Back of TV)
IN
O
U
T
(Cable box)
E
Cable Signal

Connection B

(Back of VCR)

You can use the AUDIO OUT jacks and

VIDEO OUT jack on the back of the

VCR if your TV has Audio/Video Input

jacks. In this case, you need to set the

TV to external Line Input Mode. Please

refer to your TV’s owner’s manual.

Front & Rear TerminalsStereo TV Connection
ANT
IN
OUT

AUDIO

ANT
IN
OUT

VIDEO

OUT
L
R
IN

Connect

1

Audio/Video Cables

(not supplied)

LR

AUDIO OUTVIDEO

OUT
LR

AUDIO INVIDEO

IN

(Back of TV)

INOUT

(Back of VCR)

• Remote control (NA371UD /NA375UD) withTw o AA batteries• RF Cable(WPZ0901TM002)• Owner’s Manual(0VMN03901)Supplied AccessoryInstalling the Batteries forthe Remote ControlInstall two AA batteries(supplied) matching thepolarity indicated onthe bottom of theremote control.
ANT
AUDIOVIDEO
IN
OUT
OUT IN
OUT
L
R
IN
ANT
AUDIOVIDEO
IN
OUT
OUT IN
OUT
L
R
IN
AUDIO IN jacksConnect the audio cables from the audioout jacks of a camcorder, another VCR, oran audio source.VIDEO IN jackConnect the video cable from the video outjack of a camcorder, another VCR, or anaudio-visual source (laser disc player,video disc player, etc.).AUDIO OUT jacksConnect the audio cables to the audio injacks of a camcorder, another VCR, a stereoamplifier, or an audio system.ANT IN jackConnect your antenna or cable box.ANT OUT jackConnect the RF cable (supplied) tothe antenna input jack on your TV.VIDEO OUT jackConnect the video cable to the video in jackof a camcorder, another VCR, or a TV.
MECHANNELPOWERVIDEO L - AUDIO - RTAPE IN
T
I
M
E
R
V
C
R
/
T
V
PO
W
ER
R
E
C

0VMN03901 / HF410UD, HJ410UD ★★★★

Printed in China

HF410_HJ410UD.QX33 2005.03.16 17:59 Page 1
Sylvania 6260VE

Need help?

Number of questions: 0

Do you have a question about the Sylvania 6260VE or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Sylvania 6260VE owners to properly answer your question.

About the Sylvania 6260VE

Sylvania 6260VE #1

View the manual for the Sylvania 6260VE here, for free. This manual comes under the category Televisions and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Sylvania 6260VE or do you need help? Ask your question here

Sylvania 6260VE specifications

General
Brand Sylvania
Model 6260VE
Product Television
Language English
Filetype PDF

Related product manuals

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Sylvania 6260VE.

Is your question not listed? Ask your question here