1. Home
  2. Televisions
  3. Sylvania
  4. 6240VE

Sylvania 6240VE manual

Sylvania 6240VE
(1)
  • Number of pages: 8
  • Filetype: PDF
If channel 3 is already occupied for broadcasting,1) Set your TV to channel 4.2) Insert a pre-recorded tape into the VCR.3) Press the PLAY button once.
4) After a few seconds, press the PLAY button on the VCR for 3 seconds.
•
The RF output channel will change to channel 4 from channel 3 and you willsee a playback picture.
•
When a picture does not appear on the TV screen, repeat step [4].5) Press the STOP button to stop playback.You can use the AUDIO OUT jack andVIDEO OUT jack on the back of theVCR if your TV has Audio/Video Inputjacks. In this case, you need to set theTV to external Line Input Mode. Pleaserefer to your TV’s owner’s manual.- 1 -
Owner’s Manual
Video Cassette Recorder

6240VE

If you need additional operating assistance afterreading this owner’s manual or to order replace-ment accessories, please call TOLL FREE : 1-800-968-3429or visit our web site at http://www.funai-corp.com0VMN03900 / HF310UD ★★★★★Printed in China
ANT
AUDIO
VIDEO
IN
OUT
OUT IN
ANT
AUDIOVIDEO
IN
OUT
OUT IN
AUDIO IN jackConnect the audio cable from the audio outjack of a camcorder, another VCR, or anaudio source.VIDEO IN jackConnect the video cable from the video outjack of a camcorder, another VCR, or anaudio-visual source (laser disc player,video disc player, etc.).AUDIO OUT jackConnect the audio cable to the audio in jackof a camcorder, another VCR, a stereoamplifier, or an audio system.ANT IN jackConnect your antenna or cable box.ANT OUT jackConnect the RF cable (supplied) tothe antenna input jack on your TV.Front & Rear TerminalsStereo TV Connection
ANT
IN
OUT
AUDIO
ANT
IN
OUT
VIDEOConnect
1
Audio/Video Cables(not supplied)
LR
AUDIO OUTVIDEO
OUT
LR
AUDIO INVIDEO
IN
(Back of TV)INOUT(Back of VCR)
• Remote control(NA371UD) withTw o AA batteries• RF Cable(WPZ0901TM002)• Owner’s Manual(0VMN03900)Supplied AccessoryInstalling the Batteries forthe Remote ControlInstall two AA batteries(supplied) matching thepolarity indicated onthe bottom of theremote control.
Hint
Hint
• The RF output channel maynot change when you adjusttracking during playback. Inthis case, stop the playback,and start the playback again.After that, press the PLAY but-ton on the VCR for 3 secondsagain.VIDEO OUT jackConnect the video cable to the video in jackof a camcorder, another VCR, or a TV.RF Output Channel
MCHANNELPOWERVIDEO AUDIOTAPE INTIMER
V
C
R
/T
V
P
O
W
E
R
R
E
C

1. Before using your VCR

ANT
IN
OUT
RF Cable (supplied)(Back of VCR)(Back of TV)(Back of TV)Plug the AC power cords of the VCR and TV into the AC outlets.
4
DisconnectAntenna
or
2
Connect
3
ConnectCableSignalAntenna
or
CableSignal
Basic VCR/TV Connection
Select this connection when you want to view or record a
scrambled channel.
With this connection, channels cannot
be changed on the VCR. You can view or record ONLY the
channels you have selected on the cable box or the satellite
box.
• While you are recording, only the recorded channel can
be viewed.
T
o select channels of the cable box or satellite box
1)Turn on the VCR by pressing the POWER button, and
then, press the VCR/TV button.The POWER and the
VCR/TV indicators on the front panel will light on. Then,
press the CHANNEL buttons to select channel 3 or 4
(the same channel as the output channel of the cable
box or satellite box).
• If you use the channel 4, you need to change the VCR’s
RF output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel 3 or 4 (the same channel as
you have selected at step 1).
3) At the cable box or satellite box, select the channel you
want to view or record.
Select this connection when you want to change channels
on the VCR. With this connection, you may watch one
channel while recording another.
• You may not view or record a scrambled channel.
T
o select channels of the cable box or satellite box
1)At the cable box or satellite box, select channel 3 or 4
(the same channel as the VCR’s RF output channel.)
• Refer to “RF Output Channel”.
2)At the TV, select the same channel as the output chan-
nel (3 or 4) of the cable box or satellite box.
3)Turn on the VCR by pressing the POWER button, and
then, press the VCR/TV button .The POWER and
VCR/TV indicators on the front panel will light on. Then,
select the channel you want to view or record.
T
o play back a tape
Follow the steps 1) to 2) above. Then, play back a tape.
• Refer to “Playback” on page 5.
T
o view one channel while recording another
1)
While you are recording on the VCR, press the VCR/TV but-
ton so that the VCR/TV indicator disappears on the VCR.
2)At the cable box or satellite box, select the channel you
want to view.
Hint for Cable Box or Satellite Box
ANT
IN
OUT
RF Cable
(supplied)
(Back of VCR)
IN
OUT
E
(Back of TV)
Cable
Signal
Connection A
(Cable box or
Satellite box)
ANT
IN
OUT
RF Cable (supplied) RF Cable
(Back of TV)
IN
OUT
(Cable box or
Satellite box)
E
Cable
Signal
Connection B
(Back of VCR)
Sylvania 6240VE

Need help?

Number of questions: 0

Do you have a question about the Sylvania 6240VE or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Sylvania 6240VE owners to properly answer your question.

About the Sylvania 6240VE

Sylvania 6240VE #1

View the manual for the Sylvania 6240VE here, for free. This manual comes under the category Televisions and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Sylvania 6240VE or do you need help? Ask your question here

Sylvania 6240VE specifications

General
Brand Sylvania
Model 6240VE
Product Television
Language English
Filetype PDF

Related product manuals

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Sylvania 6240VE.

Is your question not listed? Ask your question here