SWIT S-8210S manual

SWIT S-8210S
8.7 · 1
PDF manual
 · 1 page
manualSWIT S-8210S

High Load Rechargeable Li-ion Battery Pack

Tel: +86-25-85805753
Fax: +86-25-85805296
E-mail: contact@swit.cc


1. High power output Li-ion battery pack, rechargeable.
2. 4-step LED power indicator.
3. D-tap DC output and charging socket.
4. Build-in multiple protective circuit design.


1. Never attempt to open the battery pack.
2. Use SWIT charger or the chargers recommended by SWIT.
3. Please make sure the battery mount on camera could endure
high current, otherwise it might damage the mount or battery.
4. Keep the battery pack terminals clean.
5. Never short-circuit the battery pack terminals.
6. Never expose the battery pack to rain, fire or moisture.
7. Never expose the battery pack to temperature above 60 .
8. Avoid strong mechanical shock.
9. The battery pack may become warm in use or while being
charged. This is normal.


1. The battery pack is not fully charged when it is purchased.
Charge the battery before use.
2. Use SWIT charger or the chargers recommended by SWIT.
3. The battery pack should be charged within a temperature
range of 0-40


1. Fully charged battery pack will discharge naturally and please
use it as soon as it gets charged.
2. At low temperature, the running time of battery pack usually
3. The internal impedance of battery pack will be greater at low
temperature, which may cause the automatically circuit cutting.
4. According to the using conditions, please set the camera low
battery warning voltage at 13-14V, cut off voltage at 12-13V.

LED indicator

1. The four-step LEDs indicate the remaining capacity when
press the “CHECK” button.
2. The indicator may not be accurate when the battery is
powering on the camera.
3. When only one LED indicates, please charge the battery as
soon as possible.

DC socket

The D-tap DC socket can be used as 14.4V DC output or SWIT
S-3010B charging input.
1. Open the rubber cover and plug in D-tap lead to DC output or
2. Close the rubber cover when disconnected, to keep the socket
away from dust.

Self-protection and Re-activate

The battery pack has multiple protective circuits and will cut off
power automatically when overload or any abnormal detected.
Mount the battery pack to any SWIT charger, it will be re-
activated and get charging normally.


Please keep in cool, dry and clean place.
Model Mount Type
Capacity Max output Dimension Mass
S-8210A Gold Mount 14.4V 115Wh 8Ah 150W 12A 165×90×53mm 900g
S-8210S V-mount 14.4V
115Wh 8Ah 150W 12A 165×90×51mm 900g
S-8260A Gold Mount 14.4V
172Wh 12Ah 180W 15A 165×90×68mm 1300g
S-8260S V-mount 14.4V
172Wh 12Ah 180W 15A 165×90×66mm 1300g


View the manual for the SWIT S-8210S here, for free. This manual comes under the category Camera batteries and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the SWIT S-8210S or do you need help? Ask your question here

Need help?

Do you have a question about the SWIT and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other SWIT owners to provide you with a good answer.

Number of questions: 0

When performance is your priority, rely on proven, trusted technology. With the cylindrical lithium-ion battery cell you...
S-8210S | S-8210S
Camera battery
User manual (PDF)
Battery capacity115 Wh
Product colourBlack
Battery voltage14.4 V
Compatible products-
Battery technologyLithium-Ion (Li-Ion)
Battery capacity8000 mAh
Brand compatibilitySWIT
Packaging data
Quantity per pack1 pc(s)
Weight & dimensions
Width165 mm
Depth90 mm
Height53 mm
Weight900 g
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SWIT S-8210S below.

Is your question not listed? Ask your question here

No results