SWIT S-8082S manual

SWIT S-8082S
7.5 · 1
PDF manual
 · 1 page
manualSWIT S-8082S

Rechargeable Li-ion Battery Pack

Tel: +86-25-85805753
Fax: +86-25-85805296
E-mail: contact@swit.cc


1. High performance Li-ion battery pack, rechargeable.
2. 4-step LED power indicator.
3. D-tap DC output and charging socket. (except S-8056N)
4. Build-in multiple protective circuit design.


1. Never attempt to open the battery pack.
2. Use SWIT charger or the chargers recommended by SWIT.
3. Keep the battery pack terminals clean.
4. Never short-circuit the battery pack terminals.
5. Never expose the battery pack to rain, fire or moisture.
6. Never expose the battery pack to temperature above 60 .
7. Avoid strong mechanical shock.
8. The battery pack may become warm in use or while being
charged. This is normal.


1. The battery pack is not fully charged when it is purchased.
Charge the battery before use.
2. Use SWIT charger or the chargers recommended by SWIT.
3. The battery pack should be charged within a temperature
range of 0-40


1. Fully charged battery pack will discharge naturally and please
use it as soon as it gets charged.
2. At low temperature, the running time of battery pack usually
3. The internal impedance of battery pack will be greater at low
temperature, which may cause the automatically circuit cutting.
4. According to the using conditions, please set the camera low
battery warning voltage at 13-14V, cut off voltage at 12-13V.

LED indicator

1. The four-step LEDs indicate the remaining capacity when
press the “CHECK” button.
2. The indicator may not be accurate when the battery is
powering on the camera.
3. When only one LED indicates, please charge the battery as
soon as possible.

DC socket

The D-tap DC socket can be used as 14.4V DC output or SWIT
S-3010B charging input.
1. Open the rubber cover and plug in D-tap lead to DC output or
2. Close the rubber cover when disconnected, to keep the socket
away from dust.
Remark: The NP-1 battery S-8056N does not have DC socket.

Self-protection and Re-activate

1. The battery pack has multiple protective circuits and will cut off
power automatically when overload or any abnormal detected.
2. If it’s in normal environment temperature, please lay the
battery pack aside for 3-5 minutes and mount the battery pack to
any SWIT charger, it will be re- activated and get charging
3. If the environment temperature is high, please lay the battery
pack aside for 20-30 minutes and then charge the battery by
SWIT chargers to active.


Please keep in cool, dry and clean place.
Model Mount Type Nominal voltage
Capacity Max output Dimension Mass
S-8080A Gold Mount 14.4V 95Wh 6.6Ah 50W 3.5A 165×90×51mm 800g
S-8080S V-mount 14.4V
95Wh 6.6Ah 50W 3.5A 165×90×49mm 800g
S-8082A Gold Mount 14.4V
95Wh 6.6Ah 50W 3.5A 134×88×54mm 800g
S-8082S V-mount 14.4V
95Wh 6.6Ah 50W 3.5A 134×88×52mm 800g
S-8110A Gold Mount 14.4V
126Wh 8.8Ah 100W
8A 165×90×53mm 900g
S-8110S V-mount 14.4V
126Wh 8.8Ah 100W
8A 165×90×51mm 900g
S-8160A Gold Mount 14.4V
190Wh 13.2Ah 100W
8A 165×90×68mm 1300g
S-8160S V-mount 14.4V
190Wh 13.2Ah 100W
8A 165×90×66mm 1300g
S-8180A Gold Mount 14.4V
220Wh 15.3Ah 140W
12A 165×90×68mm 1300g
S-8180S V-mount 14.4V
220Wh 15.3Ah 140W
12A 165×90×66mm 1300g
S-8056N NP-1 14.4V
73Wh 5.1Ah 50W 3.5A 185×72×25mm 690g

View the manual for the SWIT S-8082S here, for free. This manual comes under the category Camera batteries and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the SWIT S-8082S or do you need help? Ask your question here

Need help?

Do you have a question about the SWIT and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other SWIT owners to provide you with a good answer.

Number of questions: 0

When performance is your priority, rely on proven, trusted technology. With the cylindrical lithium-ion battery cell you...
S-8082S | S-8082S
Camera battery
User manual (PDF)
Battery capacity95 Wh
Battery technologyLithium-Ion (Li-Ion)
Battery capacity6600 mAh
Product colourBlack
Battery voltage14.4 V
Brand compatibilityAny brand
Compatible products-
Packaging data
Quantity per pack1 pc(s)
Operational conditions
Operating temperature (T-T)0 - 40 °C
Weight & dimensions
Weight710 g
Width134 mm
Depth88 mm
Height52 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SWIT S-8082S below.

Is your question not listed? Ask your question here

No results