Swissvoice Eurit 4000 manual

Swissvoice Eurit 4000
6.4 · 1
PDF manual
 · 108 pages
English
manualSwissvoice Eurit 4000

Brief Operating

Instructions

Attention: Operating
instructions contain safety
precautions!
Please read before putting
into operation, and store
in a safe place.

Eurit 4000

ISDN & WAP

View the manual for the Swissvoice Eurit 4000 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 6.4. This manual is available in the following languages: English. Do you have a question about the Swissvoice Eurit 4000 or do you need help? Ask your question here

Need help?

Do you have a question about the Swissvoice and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandSwissvoice
ModelEurit 4000
Productphone
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Swissvoice Eurit 4000 below.

How can I switch the answering machine on/off on the Swissvoice Eurit 4000 phone?

To switch the answering machine on/off on the Swissvoice Eurit 4000 phone, you have two options: remote access or individual user settings. 1. Remote Access: - Call your Swissvoice Eurit 4000 phone and wait until you hear no more rings. - Enter the remote access PIN. - If there are voice messages on your answering machine, they will be played back to you. - To switch on the answering machine for the user who has been called, press digit key 4 on the remote telephone. You will hear the greeting. - To switch off the answering machine for the user who has been called, press digit key 6 on the remote telephone. - To switch on the answering machine for all users, press the digit keys on the remote telephone in the sequence "4" 2 - # - 4. - To switch off the answering machine for all users, press the digit keys on the remote telephone in the sequence "6" 2 - # - 6. - To play back the greetings, press digit key 7 on the remote telephone. All greetings will be played back one by one. - During playback, you can repeat the current greeting by pressing digit key 1, play the previous greeting by pressing digit key 1 twice, play the next greeting by pressing digit key 3, or abort the current function by pressing digit key 2. 2. Individual User Settings: - Press the user key until the display shows the user for whom you want to switch the answering machine on/off. - Briefly press the telephone answering machine key to switch on the answering machine. The LED will illuminate. - Press the telephone answering machine key again to switch off the answering machine. - Alternatively, you can go to the "Answering Machine" menu, select the "Status" line, and press the OK key. From the pop-up window, select "ON" to switch on the answering machine or "OFF" to switch it off. Press the OK key to confirm. - Don't forget to save your settings by pressing the Fox key below "save." Remember, you can accept a call in the middle of a greeting or message playback by picking up the handset. And if you want to record, play back, change, or delete a greeting, you can do so using the options available in the "Answering Machine" menu.

How do I define users and personalize functions for each user on the Swissvoice Eurit 4000 phone?

To define users and personalize functions on the Swissvoice Eurit 4000 phone, follow these steps: 1. Press the user key on the phone to access the user profiles that have been programmed in the telephone. The current user name will be displayed at the top right of the display. 2. Use the dial keypad to dial phone numbers or to send keypad information. 3. The function keys located above the dial keypad allow you to perform various actions. For example, you can switch the telephone answering machine on or off, call up the redial memory, call up the LOG memory, park calls with the PARK key, or select a function programmed on the \n key. 4. Start by selecting the language. By default, the display language is set to your national language. However, you can change it by going to the "Installation/Location" menu, selecting the "Language" line, choosing the desired language from the pop-up window, and pressing the OK key. 5. To create multiple subscriber numbers (MSNs) for the first time, go to the "Installation/Define user" menu. Change the user on the telephone by pressing the user key. To fully utilize the features of the Eurit 4000, it is recommended to define at least two users. Once you have defined the required settings for each user, the Eurit 4000 will personalize many of the functions based on the selected user. This includes notifying the phone number of the current user to the person being called, calculating telephone charges separately for each user, and treating incoming messages differently based on call forwarding, telephone answering machine settings, or Do Not Disturb activation. Please note that these instructions are specific to the Swissvoice Eurit 4000 phone and may not apply to other models or brands.

How do I set up call forwarding and do not disturb on the Swissvoice Eurit 4000 phone?

To set up call forwarding and do not disturb on the Swissvoice Eurit 4000 phone, follow these steps: 1. Enable call forwarding: Press the user key until the display shows the user for whom you want to enable call forwarding. Select the type of call forwarding you want (unconditional, on busy, or no answer) and set call forwarding to "ON". Enter the phone number to which calls should be forwarded and press the Fox key below "Send to network". 2. Disable call forwarding: Press the user key until the display shows the user for whom you want to disable call forwarding. Select the type of call forwarding you want to disable and set it to "OFF". Press the Fox key below "Send to network". 3. Forward a call: If you don't want to speak to the caller shown on the display and want to forward the call immediately to another phone, press the Fox key below ">>" until "divert" appears. Press the Fox key below "divert" and enter the phone number to which you want to forward the call. Press the Fox key below "Do". 4. Handle anonymous callers: Your phone provides options for handling callers who do not send their phone number. To set this up, go to the "User settings" menu, select your name, choose the "Anonymous caller" line, and select how you want anonymous callers to be handled. Press the Fox key below "save" to save the settings. These steps will allow you to easily set up call forwarding and do not disturb on your Swissvoice Eurit 4000 phone.

Is the manual of the Swissvoice Eurit 4000 available in English?

Yes, the manual of the Swissvoice Eurit 4000 is available in English .

Is your question not listed? Ask your question here

No results