Swissvoice bTouch manual

Swissvoice bTouch
9.2 · 1
PDF manual
 · 96 pages
English
manualSwissvoice bTouch
Cordless analogue telephone (DECT)

BTouch

Instrukcja Obsługi
User manual
Photo may differ from the actual product.

View the manual for the Swissvoice bTouch here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Swissvoice bTouch or do you need help? Ask your question here

Need help?

Do you have a question about the Swissvoice and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
S
sandro piattiJuly 23, 2020

can i connect the btouch to my laptop via blutooth and dial my contacts from my laptop

General
BrandSwissvoice
ModelbTouch | 20405903
Productphone
EAN7611425000174
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Display
Built-in displayYes
Performance
ECO modeYes
Number of melodies15
Answering machineYes
Recording time25 min
Ringer typePolyphonic
TypeDECT telephone
GAP compatibleYes
Maximum indoor range50 m
Maximum outdoor range300 m
Intercom-
Phone features
Microphone muteYes
Phonebook capacity1500 entries
Multi handset capability5
SpeakerphoneYes
Management features
Clock with calendarYes
Phonebook sharingYes
Call management
Caller IDYes
RedialingYes
Call log entries20
Call timerYes
Calling line identification presentation (CLIP)Yes
On-hook dialingYes
Explicit call transferYes
Conference callYes
Power
Standby time100 h
Talk time10 h
Battery technologyNickel-Metal Hydride (NiMH)
Design
Product colorBlack, Silver
Mounting typeDesk
Elderly phone-
Ports & interfaces
Wireless connectionYes
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Swissvoice bTouch below.

Does the Swissvoice bTouch have a built-in display?

Yes, the Swissvoice bTouch has a built-in display, which allows for easy navigation and viewing of information for the user.

Does the Swissvoice bTouch have an ECO mode?

Yes, the Swissvoice bTouch has an ECO mode, which helps to save energy and reduce environmental impact compared to other phones without this feature.

How many melodies can the Swissvoice bTouch play?

The Swissvoice bTouch can play 15 different melodies, giving users a variety of options for incoming call alerts.

What is the phonebook capacity of the Swissvoice bTouch?

The Swissvoice bTouch has a phonebook capacity of 1500 entries, providing ample space for storing contacts compared to other phones with smaller capacities.

Does the Swissvoice bTouch support conference calls?

Yes, the Swissvoice bTouch supports conference calls, allowing users to easily connect multiple parties for group discussions, making it a versatile choice for communication needs.

How can I change the system PIN on the Swissvoice bTouch phone?

To change the system PIN on your Swissvoice bTouch phone, follow these steps: 1. Ensure your handset/base station is in standby mode. 2. Press the MENU button, select Settings, and press SELECT. 3. Choose System PIN and press SELECT. 4. Enter the old four-digit system PIN (default is "0000") and press OK. 5. Enter the new four-digit system PIN and press OK. 6. Re-enter the new system PIN and press OK. 7. Your new system PIN is now saved. Remember to keep your new system PIN safe. Forgetting it will require a technical intervention that will incur additional charges.

What should I do if the battery of my Swissvoice bTouch phone is not lasting as long as expected?

1. Use only the provided or approved battery pack to ensure proper functioning and safety. 2. Avoid using other rechargeable or non-rechargeable batteries as they may cause malfunctions. 3. Ensure the battery is charged to the defined minimum capacity of 750 milliampere-hours (mAh). 4. Allow new batteries to reach their full capacity through several charge/discharge cycles. 5. Avoid short-circuiting the batteries and prevent contact with greasy materials. 6. Insert the telephone connector in the socket after fully charging the battery. 7. Recharge the battery fully after it is fully discharged to improve its capacity. 8. Replace the handset in the base station after each call to optimize charging. 9. Monitor the battery charge status on the display and heed warning signals for low battery levels. 10. Never place the handset in the base station without the battery compartment cover.

How can I change the system PIN on the Swissvoice bTouch phone?

To change the system PIN on your Swissvoice bTouch phone, follow these steps: 1. Make sure your handset/base station is in standby mode. 2. Press the MENU button, select Settings, and press SELECT. 3. Choose System PIN and press SELECT. 4. Enter the old four-digit system PIN (default is "0000") and press OK. 5. Enter the new four-digit system PIN and press OK. 6. Re-enter the new system PIN and press OK. 7. Your new system PIN is now saved. Remember to keep your new system PIN safe. Forgetting it will require a technical intervention that will incur additional charges.

What should I do if the ringer volume on the Swissvoice bTouch phone is too low?

To adjust the ringer volume on your Swissvoice bTouch phone, follow these steps: 1. Press the MENU button, select Audio, and press SELECT. 2. Choose Ringer volume and press SELECT. 3. You can set the volume for different types of calls: Home (fixed network), Cellular 1 (GSM 1), Cellular 2 (GSM 2), or All home & cell (all calls). 4. Adjust the volume level for each type of call by selecting the desired option and pressing OK. 5. To turn off the ringer for a specific type of call, select OFF. 6. Confirm the changes by pressing OK. 7. If the volume is set to "Off" for all calls, a "Ringer off" symbol will flash on the display.

How do I switch the answering machine on or off on the Swissvoice bTouch phone?

To switch the answering machine on or off on the Swissvoice bTouch phone, follow these steps: - Press MENU, select Ans. system, and press SELECT. - Choose Ans. sys. setup and press SELECT. - Select Answer on/off and press SELECT. - Choose your preferred setting and press OK. To record a new announcement: - Press MENU, select Ans. system, and press SELECT. - Select Ans. sys. setup and press SELECT. - Choose Announcement and press SELECT. - Select Record and press SELECT. - Choose Answer only or Answer & Record and press SELECT. - Record your announcement when prompted and press SAVE. To listen to or delete announcements: - Press MENU, select Ans. system, and press SELECT. - Select Ans. sys. setup and press SELECT. - Choose Announcement and press SELECT. - Select Play to listen or DELETE to delete. For remote access: - Press MENU, select Ans. system, and press SELECT. - Select Remote access and choose to activate or deactivate it. - Enter a remote access PIN if activating.

Is the manual of the Swissvoice bTouch available in English?

Yes, the manual of the Swissvoice bTouch is available in English .

Is your question not listed? Ask your question here

No results