Swann SWO-KEF1PA manual

Swann SWO-KEF1PA
5.8 · 1
PDF manual
 · 2 pages
English
manualSwann SWO-KEF1PA
1 Slide the back cover off. 2 Pull out the protective strip to
engage the battery and activate
the Key Fob.
The Key Fob works as a remote control within your Smart Home system, offering a
quick and convenient way for you to activate a particular security mode whether you
are staying, leaving or arriving home.
Arming your system with the Key Fob
Double-press the Away or Night button to arm your Smart Home system in Away
or Night mode. The LED blinks green and then red twice for Night mode and thrice
for Away mode as confirmation. There is a entry/exit delay period which allows you
enter, leave or walk freely around the inside of the premises, before your system is
active in Away or Night mode. The default entry/exit delay period is 20 seconds. You
can easily configure the Entry/Exit Delay period from the Smart Home web portal via
My Settings > Smart Hub.
Disarming your system with the Key Fob
Double-press the Home button to disarm your Smart Home system. The LED blinks
green and then red as confirmation.
Tip: Have a Smart Home Siren accessory connected? Simply use the Key Fob to
immediately turn off the alarm by double-pressing the Home button.
Protective
Strip

TroubleshootingHow it works?

Activating the Key Fob Pairing the Key Fob

Connect Button
1 From the Smart Home web portal, click or tap My Settings > Key Fobs >
add device. The System Setup screen is displayed and your Smart DVR/Hub
automatically goes into pairing mode.
Note: You can skip this step if the System Setup screen is already displayed
(during the Smart DVR/Hub registration process, or when you are setting up other
smart home accessories).
2 Press the Connect button on the Key Fob. The status LED blinks once. When the
Key Fob has paired with your Smart DVR/Hub, the status LED blinks twice.
3 Follow the on-screen instructions to complete the setup.
The Key Fob is not pairing with my Smart DVR/Hub
Reset the Key Fob - press and hold the Connect button until the status LED blinks
rapidly. Then, try pairing the Key Fob again.
The Key Fob is not working. The Status LED does not light up when I double-
press any of the Home, Away or Night buttons
The Key Fob is running low on battery power. Replace the battery in the Key Fob
with one fresh "CR2032" lithium battery immediately.
IMPORTANT: Make sure to replace the key ring once you have finished setting up the Key Fob.

Manual

View the manual for the Swann SWO-KEF1PA here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 5.8. This manual is available in the following languages: English. Do you have a question about the Swann SWO-KEF1PA or do you need help? Ask your question here

Need help?

Do you have a question about the Swann and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Swann SWO-KEF1PA specifications

Below you will find the product specifications and the manual specifications of the Swann SWO-KEF1PA.

General
BrandSwann
ModelSWO-KEF1PA | SWO-KEF1PA-GL
Productremote controller
EAN0840236104956
LanguageEnglish
FiletypeUser manual (PDF)
Design
Remote control proper useSecurity system
Input typePress buttons
Buttons quantity4
Backlight buttons-
Product colorSilver, White
Interface-
Display
Built-in displayNo
Performance
Number of devices supported-
Maximum range- m
Battery
Rechargeable-
Battery technology-
Battery typeCR2032
Battery voltage3 V
Packaging data
Quantity per pack2 pc(s)
Weight & dimensions
Length63.5 mm
Height12 mm
Width26.75 mm
Weight30 g
Packaging content
Batteries includedYes
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Swann SWO-KEF1PA below.

What is the weight of the Swann SWO-KEF1PA?

The Swann SWO-KEF1PA has a weight of 30 g.

A battery in my remote controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the Swann SWO-KEF1PA?

The Swann SWO-KEF1PA has a height of 12 mm.

What is the width of the Swann SWO-KEF1PA?

The Swann SWO-KEF1PA has a width of 26.75 mm.

Is the manual of the Swann SWO-KEF1PA available in English?

Yes, the manual of the Swann SWO-KEF1PA is available in English .

Is your question not listed? Ask your question here

No results