View the manual for the Swan SR11025BN here, for free. This manual comes under the category refrigerators and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Swan SR11025BN or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Swan SR11025BN.

| Brand | Swan |
| Model | SR11025BN | SR11025BN |
| Product | refrigerator |
| EAN | 5055322529765 |
| Language | English |
| Filetype | User manual (PDF) |
| Appliance placement | Freestanding |
| Product color | Black |
| Custom panel-ready | - |
| Door hinge | Right |
| Reversible doors | - |
| Control type | Rotary |
| Built-in display | No |
| Housing material | Metal, Plastic |
| Storage time during power failure | - h |
| Freezing capacity | 4.5 kg/24h |
| Star rating | - |
| No Frost (freezer) | - |
| Freezer interior light | No |
| Freezer number of shelves/baskets | 3 |
| Freezer door balconies | 0 |
| Fast freeze function | - |
| Freezer position | Bottom-placed |
| Freezer net capacity | 72 L |
| Total net capacity | 250 L |
| Climate class | - |
| Noise level | 42 dB |
| Icemaker | - |
| Holiday function | - |
| C |
| Fresh zone compartment | - |
| Door open alarm | - |
| Temperature alarm | - |
| Fridge net capacity | 178 L |
| Fridge interior light | Yes |
| Lamp type | LED |
| No Frost (fridge) | - |
| Multi-Airflow system (fridge) | - |
| Fridge number of shelves/baskets | 3 |
| Number of vegetable drawers | 1 |
| Fridge door balconies | 4 |
| Energy efficiency scale | A to G |
| Annual energy consumption | 261 kWh |
| Connected load | - W |
| Energy efficiency class | F |
| Sustainability certificates | ENERGY STAR |
| Width | 546 mm |
| Depth | 623 mm |
| Height | 1815 mm |
| Package width | 575 mm |
| Package depth | 665 mm |
| Package height | 1863 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Swan SR11025BN below.
There may be various causes for this, it is recommended to check the following: - Is the drain hole free of dirt? - Does the refrigerator door close properly? - Is the refrigerator not too full so that air can circulate properly? - Is the temperature not set below 5 degrees?
A common method for solving the problem of a smelly fridge is to pour vinegar into the drain and temporarily place a cup of vinegar in the fridge.
A minimum of 2.5 centimetres of free space around the fridge is needed to ventilate properly.
R-410A is a refrigerant used in machines that cool to zero degrees Celsius.
The Swan SR11025BN has a height of 1815 mm.
The Swan SR11025BN has a width of 546 mm.
The Swan SR11025BN has a depth of 623 mm.
The Swan SR11025BN has energy label F.
Yes, the Swan SR11025BN is a freestanding refrigerator, meaning it can be placed anywhere without the need for installation.
Yes, the door hinge of the Swan SR11025BN is on the right side, allowing for easy access and convenient opening.
The freezing capacity of the Swan SR11025BN is 4.5 kg/24h, which means it can freeze up to 4.5 kilograms of food in a 24-hour period.
No, the Swan SR11025BN does not have an interior light in the freezer, but it does have an interior light in the fridge compartment to easily locate items.
The Swan SR11025BN has an energy efficiency scale rating of A to G. An "A" rating signifies high energy efficiency, which means it is better for the environment and can help save on electricity costs compared to lower-rated products.
To properly install the Swan SR11025BN refrigerator and ensure optimal performance and prevent any damage, follow these steps: 1. Before installation, make sure the appliance is not tilted more than 45 degrees when moving it. Avoid using force on any part, such as the condenser, door, or handle, as it could distort and affect the refrigerator's operation. Remove all packaging before installation. 2. Ensure there is enough ventilation space around the refrigerator. Avoid installing it near external heat sources, such as direct sunlight, or external moisture sources. 3. Check that the supply voltage of the socket matches the rating label of the refrigerator. 4. Properly insert the plug into the wall socket. If possible, use a mains supply socket that is earthed with a switch. Avoid using an extension cord. 5. Adjust the adjustable feet of the refrigerator to ensure it is level and doesn't rock once it is in place. 6. Do not install the refrigerator in an environment where the ambient temperature is likely to drop below 5 degrees Celsius, such as a garage or shed. 7. Upon receipt of the refrigerator, stand it upright for at least 4 hours before switching it on to allow the system to settle. 8. When using the refrigerator for the first time, set the thermostat inside to 5 without any food inside. You may hear the quiet hum of the compressor and the circulation of liquids and gases, which is normal. It may take 2-3 hours for the appliance to reach temperature. Once the temperature is reached, you can put the food inside. 9. The temperature of the refrigerator can be adjusted by rotating the disc of the thermostat. A medium setting of 4-5 is generally suitable for most circumstances. 10. Avoid putting too much food in the refrigerator and minimize frequent door openings to conserve energy and prevent excessive frost build-up. By following these steps, you can ensure a proper installation of the Swan SR11025BN refrigerator for optimal performance and longevity.
If the Swan SR11025BN refrigerator is not cooling properly after installation, you can follow these steps to troubleshoot the issue: 1. Check the power supply: Ensure that the refrigerator is properly connected to the power socket and that the supply voltage is available. 2. Adjust the thermostat: Verify that the thermostat is set to an appropriate temperature. Setting 1 is the warmest, and setting 7 is the coldest. 3. Ensure proper ventilation: Make sure there is enough space around the refrigerator for proper airflow. Avoid placing the refrigerator near direct sunlight or other heat sources. 4. Check the door: Ensure that the refrigerator door is closed properly and not opened too frequently. Inspect the door seals for any damage or gaps. 5. Manage food quantity: Avoid overloading the refrigerator with too much food, as it can affect the cooling performance. Also, ensure that there is enough food inside the refrigerator to prevent freezing in the refrigerator compartment. 6. Clean the cooling matrix and compressor: Check for any dust or debris buildup on the cooling matrix or compressor and clean them if necessary. 7. Address noisy operation: If the refrigerator operates noisily, ensure that it is installed on a stable and level floor. Adjust the feet if needed. Also, make sure that the food stored inside, especially bottles, are not touching each other, as this can amplify vibrations. 8. Condensation: In high humidity environments, condensation may occur on the surface of the refrigerator. This is normal and can be cleaned off. If the refrigerator continues to have cooling issues after performing these checks, it is recommended to contact the service center for further assistance.
To find authorized service centers or contact customer support for the Swan SR11025BN refrigerator, you can follow these steps: 1. Check the product packaging: Look for any contact information or customer support details provided on the packaging of the Swan SR11025BN refrigerator. This may include a customer service hotline or website. 2. Visit the brand's official website: Go to the official website of Swan or the manufacturer of the SR11025BN refrigerator. Look for a "Support" or "Contact Us" section on the website. Here, you may find information on authorized service centers or customer support channels. 3. Contact customer support: Use the provided customer support hotline or email address to get in touch with the brand's customer support team. They will be able to provide you with information on authorized service centers in your area or assist you with any troubleshooting or repair queries. 4. Online search: If you are unable to find the necessary information through the above steps, you can conduct an online search using keywords such as "Swan SR11025BN authorized service centers" or "Swan refrigerator customer support." This may lead you to official service center directories or customer support forums where you can find the required contact details. By following these steps, you can easily find authorized service centers or contact customer support for the Swan SR11025BN refrigerator.
The specifications of the Swan SR11025BN refrigerator are as follows: - Capacity: The manual does not specify the exact capacity of the refrigerator. - Energy Rating: The manual does not provide information about the energy rating of the SR11025BN refrigerator. - Dimensions: The manual does not mention the specific dimensions of the refrigerator. Please note that the manual does not provide detailed specifications for the Swan SR11025BN refrigerator regarding its capacity, energy rating, or dimensions. For more specific information, it is recommended to refer to the product packaging or contact the manufacturer's customer support.
To properly clean and maintain the Swan SR11025BN refrigerator for longevity and efficiency, follow these steps: 1. Regular cleaning: Clean the interior and exterior of the refrigerator using a mild detergent and warm water. Avoid using abrasive cleaners or solvents that may damage the surfaces. Wipe dry with a clean cloth. 2. Remove and clean shelves and drawers: Take out the shelves, drawers, and other removable parts. Wash them with warm, soapy water. Rinse and dry thoroughly before placing them back in the refrigerator. 3. Defrosting: If your refrigerator has a manual defrost function, defrost it regularly to prevent excessive ice buildup. Follow the instructions in the manual on how to defrost the freezer compartment. 4. Clean the condenser coils: The condenser coils, located at the back or bottom of the refrigerator, can accumulate dust and debris over time. Use a vacuum cleaner or a soft brush to gently remove the dirt. This helps maintain proper cooling efficiency. 5. Check and replace seals: Inspect the door seals for any damage or gaps. Clean them with a mild detergent and warm water. If the seals are worn out or not sealing properly, consider replacing them to maintain optimal temperature control. 6. Avoid overloading: Do not overload the refrigerator with too much food, as it can obstruct airflow and reduce cooling efficiency. Regularly check for expired or spoiled items and remove them. By following these steps, you can ensure proper cleaning and maintenance of the Swan SR11025BN refrigerator, promoting its longevity and efficiency.
Yes, the manual of the Swan SR11025BN is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Swan and is the answer not in the manual?
Question and answer
Number of questions: 0