Suprema BioEntry R2 manual

Suprema BioEntry R2
6 · 1
PDF manual
 · 29 pages
English
manualSuprema BioEntry R2
12
Installation

Resetting the RS-485 connection

1
Turn the power on.
2
Press and hold the reset button for more than a second. The device LED displays green.
3
The RS-485 connection is reset once you hear a beep sound.
Reset the RS-485 connection of BioEntry R2 if you want to disconnect the RS-485 connection with a master device
and reconnect it to another master device.

Resetting the baud rate of RS-485

1
Turn the power on.
2
Press and hold the reset button for more than 2 seconds. When the device change to setup mode, the green LED is
blinking.
3
Depending on the number of times the reset button was pressed, the baud rate changes. You can recognize the
baud rate according to the LED color.
The number of times Baud Rate LED Color
1 9600 Cyan
2 19200 Blue
3 38400 Magenta
4 57600 White
5 115200 Red
4
The LED blinks for 5 seconds with the color set as the above. The baud rate is set once you hear a beep sound.
If you do not press the reset button after changing to the setup mode, the baud rate is set to 115200.

Manual

View the manual for the Suprema BioEntry R2 here, for free. This manual comes under the category security access control systems and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the Suprema BioEntry R2 or do you need help? Ask your question here

Need help?

Do you have a question about the Suprema and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Suprema BioEntry R2 specifications

Below you will find the product specifications and the manual specifications of the Suprema BioEntry R2.

General
BrandSuprema
ModelBioEntry R2 | BER2OD
Productsecurity access control system
LanguageEnglish
FiletypeInstallation Guide (PDF), User manual (PDF)
Technical details
TypeIntelligent access control reader
Authentication typeAccess chip/card, Biometric
CertificationCE, FCC, KC, REACH, WEEE
Access code readerNo
Fingerprint readerYes
Access chip/card readerYes
Product colorBlack, Grey
RFID frequency13.56 MHz
Ports & interfaces
PC connectedYes
PC connectionRS-485
RS-485 ports1
Operational conditions
Operating relative humidity (H-H)0 - 80 %
Operating temperature (T-T)-20 - 50 °C
Sustainability
Sustainability certificatesRoHS
Weight & dimensions
Weight158 g
Width50 mm
Depth37.5 mm
Height164 mm
Display
Built-in displayNo
Camera
Front cameraNo
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Suprema BioEntry R2 below.

What is the weight of the Suprema BioEntry R2?

The Suprema BioEntry R2 has a weight of 158 g.

What certifications does the Suprema BioEntry R2 have?

The Suprema BioEntry R2 has the following certifications: CE, FCC, KC, REACH, WEEE.

What is the height of the Suprema BioEntry R2?

The Suprema BioEntry R2 has a height of 164 mm.

What is the width of the Suprema BioEntry R2?

The Suprema BioEntry R2 has a width of 50 mm.

What is the depth of the Suprema BioEntry R2?

The Suprema BioEntry R2 has a depth of 37.5 mm.

Is the manual of the Suprema BioEntry R2 available in English?

Yes, the manual of the Suprema BioEntry R2 is available in English .

Is your question not listed? Ask your question here

No results