SuperTooth Disco manual

SuperTooth Disco
6 · 1
PDF manual
 · 62 pages
English
manualSuperTooth Disco
!
How can I pair my SuperTooth Disco with my Bluetooth mobile phone?
Important: Make sure that your Bluetooth mobile phone supports A2DP (Advanced
Audio Distribution Profile) before proceeding.
1. From OFF, press and hold the On / Off / Stop button for 5 seconds until beep is
heard. The Bluetooth indicator turns blinking red/blue indicating that the
SuperTooth Disco is ready to pair.
2. While the SuperTooth Disco is in pairing mode, access the Bluetooth menu of
your phone. Turn on its Bluetooth function then execute a Bluetooth search to find
the SuperTooth Disco. (See your phone manual).
3. When the phone displays the list of Bluetooth devices, select ST DISCO.
4. When the phone asks for the password / pin code, enter 0000 and press OK.
5. Pairing is successful if the alternating red / blue blinking of the Bluetooth indicator
changes to blinking blue (standby mode).
The SuperTooth Disco is now ready to use with your phone.
!
How can I pair my SuperTooth Disco with my Bluetooth-enabled PC / laptop (or
Bluetooth touchpad) or via an USB Bluetooth dongle?
Important: If you use an USB Bluetooth dongle, make sure that your PC or laptop
has a Bluetooth dongle that supports A2DP and has A2DP compatible Bluetooth
Application software installed before proceeding.
1. From OFF, press and hold the On / Off / Stop button for 5 seconds until beep is
heard. The Bluetooth indicator turns blinking red / blue indicating that SuperTooth
Disco is ready to pair.
2. While the SuperTooth Disco is in pairing mode, access the Bluetooth program of
your PC / laptop / touchpad. Refer to your Bluetooth software manual on how to
pair and connect to a device. When computer asks for the password / pin code,
enter 0000.
3. If pairing is successful, the Bluetooth indicator turns blinking blue (standby mode)
and when connected, the Bluetooth indicator turns steady blue. Depending on the
dongle / PC / laptop used, Bluetooth connection will be made automatically or will
need to be made manually via the computer menu (see your computer manual).
The SuperTooth Disco is now ready to use with your PC or touchpad.
While listening to the music on the SuperTooth Disco via stereo line input,
connected to a MP3 player, a laptop, a touchpad, the sound stops by itself after
20 seconds or 5 minutes even after adjusting the volume on the SuperTooth
Disco. What should I do?
The volume level on your MP3 player / laptop / touchpad is too low. Please increase
the volume on your MP3 player / laptop / touchpad. Your SuperTooth Disco will now
work properly. The suggested volume level of the MP3 player is at 3/4 for optimal
working.
While charging my SuperTooth Disco, how do I know when the battery is fully
charged?
The Charge indicator at the back of your SuperTooth Disco will turn steady orange
while charging. When charging is complete, it will turn steady green.

View the manual for the SuperTooth Disco here, for free. This manual comes under the category other phone accessories and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the SuperTooth Disco or do you need help? Ask your question here

Need help?

Do you have a question about the SuperTooth and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
P
Peter Ayley July 27, 2023

Can you supply a power cable to charge the original super tooth disco?

The SuperTooth Disco is an other phone accessory that measures 315 millimeters in width, 70 millimeters in depth, and 89 millimeters in height. It weighs approximately 1140 grams, making it relatively lightweight for easy portability. Equipped with noise reduction technology, this accessory helps minimize background noise for clearer audio quality during phone calls or music playback. Featuring Bluetooth version 2.0+EDR, the SuperTooth Disco offers wireless connectivity to compatible devices, allowing seamless audio streaming without the hassle of wires. Additionally, it is equipped with wired connectivity technology, providing alternative options for audio input. While no further specific information is available about the SuperTooth Disco's design or additional features, its dimensions and weight suggest a compact yet substantial build, which may contribute to its durability. Considering its capability for noise reduction and Bluetooth compatibility, this accessory may serve as a convenient option for wireless audio playback or hands-free calling. In summary, the SuperTooth Disco is an other phone accessory that offers noise reduction and Bluetooth 2.0+EDR connectivity. With its dimensions of 315 x 70 x 89 millimeters and weight of 1140 grams, it appears to be a compact and lightweight option for users seeking wireless audio solutions. While further details are unavailable, its design and built-in features may contribute to its reliability and functionality.

General
BrandSuperTooth
ModelDisco | DISCO
Productother phone accessory
EAN3367970040854, 5053460587210
LanguageEnglish
FiletypeUser manual (PDF), FAQ (PDF)
Performance
Product colorBlack
Other features
Dimensions (WxDxH)315 x 70 x 89 mm
Noise reductionYes
Weight & dimensions
Weight1140 g
Ports & interfaces
Bluetooth version2.0+EDR
Connectivity technologyWired
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SuperTooth Disco below.

What is the weight of the SuperTooth Disco?

The SuperTooth Disco has a weight of 1140 g.

What are the dimensions of SuperTooth Disco?

The dimensions of SuperTooth Disco are 315 x 70 x 89 mm, making it a relatively compact accessory that can easily fit in different spaces.

Does SuperTooth Disco have noise reduction?

Yes, SuperTooth Disco has noise reduction, which ensures an enhanced audio experience by minimizing external disturbances.

What is the Bluetooth version of SuperTooth Disco?

The Bluetooth version of SuperTooth Disco is 2.0+EDR, providing a reliable wireless connection with compatible devices.

What is the connectivity technology of SuperTooth Disco?

The connectivity technology of SuperTooth Disco is wired, allowing users to connect their devices directly for uninterrupted audio playback.

How do I exit the Demo Mode on the SuperTooth Disco?

To exit the Demo Mode on the SuperTooth Disco, follow these steps: 1. Make sure that your SuperTooth Disco is turned off. 2. Press and hold the Bass (6) and On/Off (9) buttons simultaneously until the Bluetooth Indicator (8) turns violet. 3. The Demo Mode will start playing on the SuperTooth Disco. 4. If you want to play the demo again, simply press any of the Backward (3), Forward (7), or Play (2) buttons. 5. To stop the Demo Mode, press and hold the On/Off (9) button until the Bluetooth Indicator (8) turns red. By following these steps, you will be able to exit the Demo Mode on your SuperTooth Disco.

Why are the button functions on my SuperTooth Disco not working?

If the button functions on your SuperTooth Disco are not working, you can try the following steps to troubleshoot the issue: 1. Make sure that the SuperTooth Disco is turned on and properly connected to your device via Bluetooth. 2. Check the battery level of the SuperTooth Disco. If the battery is low, charge it using the provided charging cable. 3. Ensure that the buttons on the SuperTooth Disco are not physically damaged or stuck. Clean the buttons gently with a soft cloth if needed. 4. Restart your device and try reconnecting it to the SuperTooth Disco. 5. If the issue persists, try resetting the SuperTooth Disco by pressing and holding the On/Off/Stop button for a few seconds until the device powers off and then powers back on. 6. If none of the above steps resolve the issue, refer to the troubleshooting section of the manual for further assistance. By following these steps, you should be able to troubleshoot and resolve any issues with the button functions on your SuperTooth Disco.

How do I pair my phone with the SuperTooth Disco?

To pair your phone with the SuperTooth Disco, follow these steps: 1. Make sure that your phone's Bluetooth function is enabled and that it supports the A2DP (Advanced Audio Distribution Profile) technology. 2. Turn off the SuperTooth Disco if it is currently on. 3. Press and hold the On/Off/Stop button (9) on the SuperTooth Disco for about 5 seconds until the Bluetooth Indicator (8) starts flashing in red/blue. 4. Access the Bluetooth menu on your phone and initiate a search for available devices. 5. Select "ST DISCO" from the list of available devices on your phone's screen. 6. If prompted, enter the PIN code "0000" and press OK to confirm the pairing. 7. The Bluetooth Indicator (8) on the SuperTooth Disco will change from red/blue to solid blue, indicating a successful pairing. By following these steps, you should be able to pair your phone with the SuperTooth Disco and enjoy wireless audio playback.

Why is the audio quality on my SuperTooth Disco not as expected?

The audio quality on your SuperTooth Disco may not be as expected due to various reasons. Here are some possible causes and troubleshooting steps: 1. Bluetooth Interference: Ensure that there are no other devices nearby that may be causing interference with the Bluetooth signal. Move away from other electronic devices or try using the SuperTooth Disco in a different location. 2. Low Battery: Check the battery level of the SuperTooth Disco. If the battery is low, charge it using the provided charging cable. A low battery can affect the audio quality. 3. Audio Source Quality: Verify the audio quality of the source device (e.g., phone, computer) that is connected to the SuperTooth Disco. Ensure that the audio files or streaming services you are using are of high quality. 4. Distance and Obstacles: Make sure that the SuperTooth Disco and the connected device are within the recommended Bluetooth range (usually around 10 meters). Avoid obstacles such as walls or furniture that may obstruct the Bluetooth signal. 5. Reset and Reconnect: If the audio quality issue persists, try resetting the SuperTooth Disco by turning it off and on again. Then, reconnect your device to the SuperTooth Disco following the pairing instructions in the manual. By following these troubleshooting steps, you should be able to improve the audio quality on your SuperTooth Disco.

How do I reconnect my phone or computer to the SuperTooth Disco after disconnecting?

To reconnect your phone or computer to the SuperTooth Disco after disconnecting, follow these steps: 1. If your phone or computer is currently connected to the SuperTooth Disco, disconnect it by using the "Active devices" option in the Bluetooth menu or Bluetooth program of your device. 2. Turn off the SuperTooth Disco or disconnect your phone/computer from it. This will transfer the audio back to your phone or computer. 3. To reconnect your phone or computer to the SuperTooth Disco, turn on the SuperTooth Disco by pressing and holding the On/Off/Stop button (9) for 1 second or using the power button. 4. Depending on your phone or computer, you may need to transfer the audio via the Bluetooth menu or program. Select the SuperTooth Disco from the "Paired devices" list in the Bluetooth menu or program. 5. Once connected, the Bluetooth Indicator (8) on the SuperTooth Disco will turn steady blue, indicating that your phone or computer is connected. 6. You can now control the audio playback using the buttons on the SuperTooth Disco. By following these steps, you should be able to reconnect your phone or computer to the SuperTooth Disco and resume audio playback.

Is the manual of the SuperTooth Disco available in English?

Yes, the manual of the SuperTooth Disco is available in English .

Is your question not listed? Ask your question here

No results