Sunstech RPS1 manual

Sunstech RPS1
(1)
  • Number of pages: 2
  • Filetype: PDF
LOCATION OF CONTROLS
1. Telescopic antenna
2. Dial scale
3. Built-in speaker
4. Volume control and Power
ON/OFF knob
5. Phones jack
6. Battery compartment
7. Band switch
8. Tuning knob
9. Power on indicator

MODEL RP-S1

POCKET RADIO

8
4
29
7
5
6
3
1
TELESCOPIC ANTENNA
1. For FM band extend the telescopic rod antenna fully inorder to obtain
the best reception.
2. For AM band reception, the unit is equipped with a built-in ferrite bar
antenna.
For optimum reception, it may be necessary to rotate the unit until clear
reception is received.
PHONE JACK
For private listening connect an earphone (included) with a 3.5mm plug to the
phone jack. The built-in speaker will be automatically disconnected.
NOMINAL SPECIFICATIONS
Frequency Range : FM 88-108 MHz
AM 540-1600 kHz
Dimensions : 100(L) x 52(W) x 18(D) MM
Weight : 60 g
Power supply : DC3V (AAA/LR03x2
Batteries - not included)
Weight and dimensions are approximate because we continually strive to
improve our products, specifications may change without prior notice.
POWER SUPPLY
Insert 2 AAA size batteries into the battery compartment at the back of the
unit, make sure they are connected according to the proper polarity.
OPERATION
1. Switch on the unit by rotating the Volume control/Power ON/OFF knob
clockwise. Adjust the Volume control to comfortable listening level.
2. Set the Band switch to the desired radio band FM or AM.
3. Turn the Tuning knob to the desired station.
4. To turn the radio off, rotate the Volume control/Power ON/OFF knob
anti-clockwise until a slight click sound is heard.
You can help protect the environment!
Please remember to respect the local regulations: hand
in the non-working electrical equipments to an appropriate
waste disposal center.

Sunstech RP-S1 (English).p65 2006/11/8, ¤U¤È 05:371

Sunstech RPS1

Need help?

Number of questions: 0

Do you have a question about the Sunstech RPS1 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Sunstech RPS1 owners to properly answer your question.

View the manual for the Sunstech RPS1 here, for free. This manual comes under the category Radios and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Sunstech RPS1 or do you need help? Ask your question here

Sunstech RPS1 specifications

No need to buy external speakers for great audio.  With integrated speakers this display is ready to go once you’re conn...
General
Brand Sunstech
Model RPS1
Product Radio
EAN 4580154913570, 4580154913587
Language English
Filetype PDF
Radio
Radio type Portable
Tuner type Analog
Supported radio bands AM,FM
PLL synthesizer
Audio
RMS rated power - W
Loudspeakers
Built-in speaker(s)
Number of built-in speakers 1
Display
Built-in display
Ports & interfaces
Headphone outputs 1
Features
MP3 playback
Product colour Red
Other features
Apple docking compatibility Not supported
Battery
Battery technology Alkaline
Number of batteries supported 2
Compatible battery sizes AAA
Battery type AAA
Battery voltage 1.5 V
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Sunstech RPS1.

Is your question not listed? Ask your question here