Steren STV-034 manual

Steren STV-034
(1)
  • Number of pages: 2
  • Filetype: PDF
Instruction manual

17” TO 42” TV STAND

Before using the product, read the following instructions.
The information shown in this manual serves only as a reference for the product. Due to updates there may be differences. Please
check our website www.steren.com for the most recent version of this manual.
1018m

STV-034

V2.2
CONTENTNECESSARY TOOLS
C (4 screws)
(1 TV Stand)
A
M5X10
F (8 screws)
M5X15
D (4 washers)
M5
G (8 nuts)
2”
H (2 anchors)
2”
E (2 screws)
B (4 arms)
M6X16
(4 screws)
M6
(4 washers)
Only for VESA 200 x 200
Drill(2")ø 10mm(ø 3/8") 50.9 mm
E
A
H
E
Drill
ø 3 mm
(2 ")50.9 mm
A
Insert the anchors (H) in the holes. Mount the bracket and fix it with the screws (E).
2
Use a 3 mm drill bit to drill on the marks that you made, at a depth of 2 ".
1
b) On woodMount the support and fix it with the screws (E).
2
F
B
G
TV
TV
TV
C
D
1
1
1
3
1
2
PREPARATION FOR INSTALLATIONLLocate the place * where you want to install the TV stand; Place it on the surface to make sure that the installation will be correct and verify that it is level using the central bubble of the leveler.
1
Make the drilling marks.
2

* Make sure there are no hidden pipes with electrical wiring, gas or water.

TV STAND INSTALLATIONUse a 10 mm drill bit to drill on the marks that you made, at a depth of 2 ".
1
a) On concretePlace the arms (B) in each corner of the TV stand base and fix them with the
nuts (G) and the screws (F) in the order shown.
PLACING ARMS

Use a screwdriver and an 8mm spanish key to tighten the pieces

Use 4 screws (C) and the 4 washers (D) to fix the TV stand on the back of the screen.
TV SCREEN INSTALLATION
Do not instal
l screens larger than 42 "or weighing more than 15 kg
The screws supplied are standard
sizes. We recommend you consult
the instruction manual of your
screen to obtain information about
the screws needed to mount it in a
support
Loosen the lock of the knob.
1
Tilt the screen to obtain the desired view angle.
2
Tighten the lock of the knob again until the TV stand is fixed.
3
ADJUSTMENTSCAUTIONS

Choose a solid and smooth wall to securely fix the stand.

• Do not over tighten the screws.

• This product is designed for indoor use; using it outdoors could cause personal injuries and failures.

Avoid falling device, as it could be damaged.

• Do not exceed of 15 kg maximum weight capacity.

• This device is not intended for use by people (including children), whose physical, sensory or mental

abilities are different or reduced, or who lack experience or knowledge.

• Children should be supervised to ensure they do not use the device as a toy.

M4X16
Steren STV-034

Need help?

Number of questions: 0

Do you have a question about the Steren STV-034 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Steren STV-034 owners to properly answer your question.

View the manual for the Steren STV-034 here, for free. This manual comes under the category Wall supports and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Steren STV-034 or do you need help? Ask your question here

Steren STV-034 specifications

General
Brand Steren
Model STV-034
Product Wall support
Language English
Filetype PDF
Mounting
Maximum weight capacity 20 kg
Minimum screen size 17 "
Maximum screen size 42 "
Mounting type Wall
Minimum VESA mount 100 x 100 mm
Maximum VESA mount 200 x 200 mm
Panel mounting interface 100 x 100,200 x 100,200 x 200 mm
Ergonomics
Tiltable
Tilt angle range 15 - 10 °
Rotating
Angle of rotation 30 °
Distance to the wall (min) 60 mm
Design
Product colour Black
Packaging content
Mounting kit
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Steren STV-034.

Is your question not listed? Ask your question here