View the manual for the Steren CLK-150 here, for free. This manual comes under the category stopwatches and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Steren CLK-150 or do you need help? Ask your question here


| Weight | 46.4 g |
| Battery type | LR44 |
| Stopwatch accuracy | 0.01 s |
| Timer | Yes |
| Alarm function | Yes |
| Display technology | LCD |
| Watch dial type | LCD dial |
| Case material | Plastic |
| Product main color | Black |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Steren CLK-150 below.
The Steren CLK-150 has a weight of 46.4 g.
The Steren CLK-150 uses an LR44 battery.
The stopwatch function of the Steren CLK-150 is accurate to 0.01 seconds.
Yes, the Steren CLK-150 has a timer function.
Yes, the Steren CLK-150 has an alarm function.
The Steren CLK-150 is made of plastic.
The Steren CLK-150 uses LCD display technology.
The Steren CLK-150 has an LCD dial.
The Steren CLK-150 stopwatch may not be turning on due to a few possible reasons. Here are the steps to troubleshoot the issue: 1. Check the battery: Ensure that the battery is properly inserted and has enough charge. If the battery is low or depleted, replace it with a new one. 2. Verify the battery contacts: Make sure that the battery contacts are clean and free from any dirt or corrosion. Clean the contacts if necessary. 3. Reset the stopwatch: Press and hold the SPLIT/RESET button and, without releasing it, press the MODE button. This will reset the stopwatch to its default settings. 4. Check the display: If the display is not showing any signs of life, it could indicate a problem with the LCD screen. In this case, contact Steren customer support for further assistance. 5. Ensure proper button operation: Make sure that you are pressing the buttons correctly and firmly. Sometimes, a faulty button may prevent the stopwatch from turning on. If the issue persists after following these steps, it is recommended to contact Steren customer support for further troubleshooting or to inquire about a possible repair or replacement.
To change the display mode on the Steren CLK-150 stopwatch, follow these steps: 1. Press the MODE button three times from the initial mode. The seconds will start flashing, indicating that it is ready to be modified. 2. Use the START/STOP button to change the flashing digit. Press it multiple times to adjust the value, or hold it down to quickly adjust the digits. 3. Once the seconds are adjusted, press the SPLIT/RESET button to move to the next programmable digit, which is the minutes. Use the START/STOP button to adjust the minutes. 4. Repeat step 3 to adjust the hours. 5. To view the alarm time, press and hold the START/STOP button from the initial mode. 6. To activate or deactivate the time tone, press and hold the SPLIT/RESET button and, without releasing it, press the MODE button. The days of the week will appear, indicating that the tone is activated. 7. Choose the desired display format for the hours. For a 12-hour format, the AM and PM icons will appear. For a 24-hour format, the HOURS icon will appear. 8. After adjusting the time and tone settings, press the SPLIT/RESET button again to configure the date. The day of the month will start flashing. Use the START/STOP button to adjust the day, and use the SPLIT/RESET button to move to the next digital space for adjusting the month and year. 9. Once you have finished adjusting the date, press the MODE button to return to the initial mode. Please note that these instructions are specific to the Steren CLK-150 stopwatch.
If the buttons on the Steren CLK-150 stopwatch are not working, you can try the following steps: 1. Check the battery: Ensure that the battery is properly inserted and has enough power. If the battery is low, replace it with a new one. 2. Clean the buttons: Sometimes, dirt or debris can accumulate around the buttons, causing them to become unresponsive. Use a soft, lint-free cloth to gently clean the buttons and remove any dirt or debris. 3. Reset the stopwatch: Press and hold the SPLIT/RESET button for a few seconds to reset the stopwatch. This can help resolve any temporary issues with the buttons. 4. Check for button lock: The Steren CLK-150 stopwatch has a button lock feature to prevent accidental button presses. Make sure that the button lock is not enabled. Refer to the manual for instructions on how to disable the button lock. 5. Contact customer support: If the above steps do not resolve the issue, it is recommended to contact Steren customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to refer to the Steren CLK-150 manual for detailed instructions and illustrations.
Yes, the manual of the Steren CLK-150 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Steren and is the answer not in the manual?
Question and answer
Number of questions: 0