• VGA enabled video source (e.g. computer, game console, etc)
• Available AC power outlet
Installation
1. Make sure all devices are powered o before trying to install.
2. Use male/male DE-15 VGA cables and male/male 3.5mm mini-jack
audio cables to connect the video source device(s) to the “IN” side
on the rear of the video splitter. Make sure the audio and video
from the same device are connected to the same A or B ports on
the splitter.
3. Connect the display devices to the “OUT” VGA connectors on the
rear of the video splitter with male/male DE-15 VGA cables.
4. Connect speakers or headphones to the 3.5mm mini-jack audio
“OUT” connectors.
5. Connect the power adapter to the video splitter and make sure
the Power LED on the front lights up.
6. Power on the video display devices rst, followed by the video sources.
Front View
Front View
Input Selection
Button
3.5mm Audio
Mini-Jack
(Output)
3.5mm Audio
Mini-Jack
(Input)
VGA
Connectors
(Output)
VGA
Connectors
(Input)
Input Selection
LED
*actual product may vary from photos
Whatsapp
Mail
Facebook
Need help?
Number of questions: 0
Do you have a question about the StarTech.com ST222MXA or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other StarTech.com ST222MXA owners to properly answer your question.
About the StarTech.com ST222MXA
View the manual for the StarTech.com ST222MXA here, for free. This manual comes under the category Splitters and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the StarTech.com ST222MXA or do you need help? Ask your question here
