11.2.1 Setting Up Routing Directory ..........................................86
11.2.2 Starting and Stopping Route Navigation ........................88
11.2.3 Changing the Destination ............................................... 89
11.2.4 Selecting Automatic or Manual Routing .........................89
Manual
View the manual for the Standard Horizon HX870E here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 6.7. This manual is available in the following languages: English. Do you have a question about the Standard Horizon HX870E or do you need help? Ask your question here
Need help?
Do you have a question about the Standard Horizon and is the answer not in the manual?
Receive updates on solutions
Get answers to your question
Question and answer
Number of questions: 0
Standard Horizon HX870E specifications
Below you will find the product specifications and the manual specifications of the Standard Horizon HX870E.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Standard Horizon HX870E below.
How do I start the Group Monitor (GM) operation on the Standard Horizon HX870E?
To start the Group Monitor (GM) operation on the Standard Horizon HX870E, follow these steps:
1. Press the MENU key to display the menu.
2. Use the CH▼/CH▲/◄/► key to select "SETUP" and press the [SELECT] soft key.
3. Select "GM SETUP" with the CH▼/CH▲ key and press the [SELECT] soft key.
4. Choose "GM TX" with the CH▼/CH▲ key and press the [SELECT] soft key.
5. Use the CH▼/CH▲ key to select the desired transmission type, then press the [ENTER] soft key. Select "ON GM" to enable transmission during GM target display.
6. Press the CLR key to return to radio operation.
To start the GM operation:
1. Press the MENU key to display the menu.
2. Use the CH▼/CH▲/◄/► key to select "GM" and press the [SELECT] soft key.
3. Select the group you want to monitor with the CH▼/CH▲ key and press the [SELECT] soft key.
4. The GM operation will start, and the GM target display will appear.
5. Press the CLR key to return to radio operation.
What should I do if I encounter issues while selecting a group to monitor during GM operation on the HX870E?
1. Press the MENU key to display the menu.
2. Use the CH▼/CH▲/◄/► key to select "SETUP" and press the [SELECT] soft key.
3. Select "GM SETUP" with the CH▼/CH▲ key and press the [SELECT] soft key.
4. Choose "GM GROUP DIR." with the CH▼/CH▲ key and press the [SELECT] soft key.
5. Select "ADD" with the CH▼/CH▲ key and press the [SELECT] soft key.
6. Choose "NAME" with the CH▼/CH▲ key and press the [SELECT] soft key.
7. Enter the group name using the CH▼/CH▲ key and the [SELECT] soft key.
8. Select "GM ID" with the CH▼/CH▲ key, press the [SELECT] soft key, and enter the group MMSI number.
9. Press the [FINISH] soft key when done entering the MMSI.
10. To enable/disable transmission during GM operation, follow the steps on page 92 of the manual.
Is the manual of the Standard Horizon HX870E available in English?
Yes, the manual of the Standard Horizon HX870E is available in English .
Need help?
Do you have a question about the Standard Horizon and is the answer not in the manual?
Question and answer
Number of questions: 0