View the manual for the SportsArt T670E here, for free. This manual comes under the category treadmill and has been rated by 2 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the SportsArt T670E or do you need help? Ask your question here
The SportsArt T670E treadmill is a piece of fitness equipment designed for users to engage in indoor running or walking workouts. It features a sturdy frame with a running surface suitable for various fitness levels. The treadmill is equipped with a motor that allows users to adjust the speed and incline for a customized workout experience. Additionally, it has a user-friendly control panel that displays essential workout metrics such as distance, time, speed, and calories burned. The SportsArt T670E treadmill offers pre-programmed workout options to cater to different fitness goals, and users can also create custom workouts based on their preferences. It is designed with safety features such as handrails and a safety key for emergency stops. The treadmill also includes built-in speakers for entertainment during workouts. Overall, the SportsArt T670E treadmill provides users with a convenient and efficient way to engage in cardiovascular exercise at home or in a fitness facility.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SportsArt T670E below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
To troubleshoot if the SportsArt T670E treadmill does not start when you press the power button, follow these steps: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. Verify that the power cord is securely connected to the treadmill. 2. Reset the circuit breaker: Locate the circuit breaker on the treadmill near the power cord. If it is tripped, reset it by flipping it back to the "On" position. 3. Check the safety key: Make sure the safety key is properly inserted into the console. The treadmill will not start if the safety key is not in place. 4. Verify the console display: Check if the console display is showing any error messages or if it is responsive. If there are error messages, refer to the manual for troubleshooting steps specific to those messages. 5. Contact customer support: If the treadmill still does not start after following the above steps, it is recommended to contact SportsArt customer support for further assistance. They will be able to provide additional troubleshooting steps or arrange for a technician to inspect the treadmill. Remember to always follow safety precautions and consult the manual for detailed instructions specific to the SportsArt T670E treadmill.
If the SportsArt T670E treadmill stops suddenly while you are using it, follow these steps to troubleshoot the issue: 1. Safety first: Immediately step off the treadmill and ensure that the emergency stop key is securely attached to your clothing. This will stop the treadmill completely. 2. Check the power source: Verify that the treadmill is still connected to a working power outlet. Ensure that the power cord is securely plugged in. 3. Inspect the safety key: Check if the safety key is still properly inserted into the console. If it has become dislodged, reinsert it securely. 4. Reset the circuit breaker: Locate the circuit breaker on the treadmill near the power cord. If it is tripped, reset it by flipping it back to the "On" position. 5. Lubricate the treadmill: If the treadmill has not been lubricated recently, it may cause sudden stops. Refer to the manual for instructions on how to lubricate the treadmill properly. 6. Contact customer support: If the issue persists after following the above steps, it is recommended to contact SportsArt customer support for further assistance. They will be able to provide additional troubleshooting steps or arrange for a technician to inspect the treadmill. Remember to always follow safety precautions and consult the manual for detailed instructions specific to the SportsArt T670E treadmill.
To troubleshoot if the walk belt on the SportsArt T670E treadmill is slipping or not moving smoothly, follow these steps: 1. Turn off the treadmill: Ensure that the treadmill is turned off and unplugged from the power source before proceeding with any troubleshooting steps. 2. Inspect the walk belt tension: Lift the walk belt at the center of the deck to check its tightness. The walk belt should lift approximately 30mm (1 1/8 inches) or have a tension of 3kg (6.6 pounds). If the walk belt is too loose, turn the rear roller screws clockwise in small increments and retest the tightness. If the walk belt is too tight, turn the rear roller screws counterclockwise in small increments and retest the tightness. Repeat this process until the walk belt is neither too loose nor too tight. 3. Check the positioning of the guide rollers: Insert your hand under the deck to inspect the positioning of the guide rollers. Ensure that the walk belt runs beneath the guide rollers and that the rollers press the belt toward the floor. If the walk belt runs on top of the guide rollers, turn the screws in position A counterclockwise to loosen the walk belt until you can flip it so that it runs underneath the rollers. Then readjust the walk belt tension as shown in step 2. By following these steps, you can troubleshoot and adjust the walk belt tension on the SportsArt T670E treadmill to ensure it is not slipping and moves smoothly during use.
If the console display on the SportsArt T670E treadmill is not functioning properly, you can try the following steps to troubleshoot the issue: 1. Check cable connections: Ensure that all cable connections between the console display and the treadmill are securely plugged in. Make sure there are no loose or disconnected cables. 2. Secure the display: Follow the steps provided in the manual to secure the display into place. This may involve rotating the display upward, inserting it into the cowling, and pressing it downward to secure it. Make sure the display lower cover rests on the outside of the cowling. 3. Verify power supply: Ensure that the treadmill is properly connected to a working power source. Check if the power cord is securely plugged in and there are no issues with the power outlet. 4. Contact customer support: If the console display still does not function properly after performing the above steps, it is recommended to contact SportsArt customer support for further assistance. They will be able to provide additional troubleshooting steps or arrange for a technician to inspect the treadmill. Remember to always follow safety precautions and consult the manual for detailed instructions specific to the SportsArt T670E treadmill.
To troubleshoot if the workout programs on the SportsArt T670E treadmill are not working as expected, follow these steps: 1. Check program selection: Ensure that you have selected the desired workout program by pressing the corresponding program button on the console. Verify that the program you have chosen matches your intended workout goal. 2. Verify program settings: Once you have selected a program, check the console display to confirm that the program settings, such as speed, incline, and duration, are correctly displayed. Make any necessary adjustments using the speed and incline buttons. 3. Reset the treadmill: If the program is still not working properly, try resetting the treadmill by turning it off and unplugging it from the power source. Wait for a few minutes, then plug it back in and turn it on again. This can help resolve any temporary issues. 4. Contact customer support: If the problem persists, it is recommended to contact SportsArt customer support for further assistance. They will be able to provide additional troubleshooting steps or arrange for a technician to inspect the treadmill. Remember to consult the manual for detailed instructions specific to the SportsArt T670E treadmill and to follow safety guidelines while troubleshooting.
To troubleshoot if the SportsArt T670E treadmill's display is not turning on, follow these steps: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. If it is connected to a power strip, make sure the power strip is turned on. 2. Verify the power switch: Locate the power switch on the treadmill and ensure it is in the "on" position. If it is already on, try turning it off and then back on again to reset the display. 3. Check the safety key: The treadmill requires the safety key to be inserted for the display to turn on. Make sure the safety key is properly inserted into the designated slot on the console. 4. Inspect the power cord: Examine the power cord for any visible damage or loose connections. If there are any issues, contact customer support for further assistance. 5. Contact customer support: If the display still does not turn on after following the above steps, it is recommended to reach out to SportsArt customer support for further troubleshooting guidance or to schedule a service appointment. Remember to always refer to the user manual for specific instructions and diagrams related to your SportsArt T670E treadmill.
If the SportsArt T670E treadmill is making unusual noises during operation, you can follow these steps to troubleshoot the issue: 1. Check the treadmill's levelness: Ensure that the treadmill is placed on a level surface. Adjust the leveling feet if necessary to stabilize the treadmill. 2. Inspect the walk belt: Examine the walk belt for any signs of wear, damage, or misalignment. If the belt is worn out or misaligned, refer to the manual for instructions on how to adjust or replace it. 3. Lubricate the walk belt: Lubrication can help reduce friction and noise. Follow the manual's instructions on how to lubricate the walk belt using the provided lubricant. 4. Tighten loose components: Check for any loose screws, bolts, or nuts on the treadmill. Use the appropriate tools to tighten them securely. 5. Clean the treadmill: Dust and debris can contribute to noise. Regularly clean the treadmill, including the walk belt, deck, and console, using a soft cloth or brush. If the unusual noises persist after following these steps, it is recommended to contact SportsArt customer support for further assistance.
To troubleshoot if the SportsArt T670E treadmill's walk belt is slipping or not moving smoothly, follow these steps: 1. Turn off the treadmill: Ensure that the treadmill is turned off before performing any troubleshooting steps. 2. Inspect the walk belt tightness: Lift the walk belt at the center of the deck to check its tightness. The walk belt should lift approximately 30mm (1 1/8 inches) or have a tension of 3kg (6.6lbs). If the walk belt is too loose, turn the rear roller screws clockwise in small increments and retest the tightness. If the walk belt is too tight, turn the rear roller screws counterclockwise in small increments and retest the tightness. Repeat this process until the walk belt is neither too loose nor too tight. 3. Check the positioning of the guide rollers: Insert your hand under the deck to inspect the positioning of the guide rollers. Ensure that the walk belt runs beneath the guide rollers and the rollers press the belt toward the floor. If the walk belt runs on top of the guide rollers, turn the screws in position A counterclockwise to loosen the walk belt until you can flip it so that it runs underneath the rollers. Then readjust the walk belt tension as shown in step 2. By following these steps, you can troubleshoot and adjust the walk belt tightness to ensure smooth and proper movement during treadmill operation.
If the SportsArt T670E treadmill is not responding to the buttons on the display, you can follow these steps to troubleshoot the issue: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. If it is connected to a power strip, make sure the power strip is turned on. 2. Verify the power switch: Locate the power switch on the treadmill and ensure it is in the "on" position. If it is already on, try turning it off and then back on again to reset the display. 3. Check the safety key: The treadmill requires the safety key to be inserted for the buttons to function. Make sure the safety key is properly inserted into the designated slot on the console. 4. Clean the display and buttons: Dust or debris on the display or buttons can interfere with their responsiveness. Use a soft cloth or mild cleaning solution to gently clean the display and buttons. 5. Restart the treadmill: If the above steps do not resolve the issue, try restarting the treadmill by turning it off, unplugging it from the power source, waiting for a few minutes, and then plugging it back in and turning it on. If the treadmill still does not respond to the buttons after following these steps, it is recommended to contact SportsArt customer support for further assistance.
To troubleshoot if the SportsArt T670E treadmill's incline function is not working properly, follow these steps: 1. Check the power source: Ensure that the treadmill is properly plugged into a working power outlet. If it is connected to a power strip, make sure the power strip is turned on. 2. Verify the power switch: Locate the power switch on the treadmill and ensure it is in the "on" position. If it is already on, try turning it off and then back on again to reset the incline function. 3. Calibrate the incline: The treadmill may require calibration if the incline function is not working correctly. Refer to the manual for instructions on how to calibrate the incline. Follow the provided steps carefully to ensure accurate calibration. 4. Check for any obstructions: Inspect the area around the treadmill's incline mechanism for any objects or debris that may be obstructing its movement. Remove any obstructions and ensure that the incline mechanism moves freely. 5. Contact customer support: If the incline function still does not work properly after following the above steps, it is recommended to contact SportsArt customer support for further assistance. They will be able to provide specific troubleshooting guidance or schedule a service appointment if necessary. Remember to always refer to the user manual for detailed instructions and diagrams related to your SportsArt T670E treadmill.
Yes, the manual of the SportsArt T670E is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the SportsArt and is the answer not in the manual?
Question and answer
Number of questions: 1i need help changing a part on my t670e. Can you help me get information on how to change the fan keypad on my machine without breaking something important. I would really appriciate the help.