SpeakerCraft S6VC manual

SpeakerCraft S6VC
5.2 · 1
PDF manual
 · 4 pages
manualSpeakerCraft S6VC


Multi-Room Speaker Selectors
with Volume Controls



Guidelines• Use the Multi-Room Speaker Selectors only with amplifiers rated at 125 watts per channel or less.• The Direct Connect connectors on the S4VC / S6VC accept wire up to 14 AWG. If you are not sure about the gauge of the wire you intend to use, please consult your SpeakerCraft dealer.
To avoid possible damage to your amplifier, pay careful attention to the section titled "Protection Settings".
• One set of adhesive area labels is included for identifying the locations of speakers on the front of the speaker selector.
Do not daisy chain (hook the outputs of one selector into the inputs of another) speaker selectors together. • Do not connect impedance matching volume controls to the speaker outputs of the selectors. Standard volume controls, such as SpeakerCraft models VST60, VST60fc, VST45, VCR120, VCR60 or VWS60, should be used if additional volume controls are needed in the system.PlacementThe unique suction feet on the bottom of the selector increases placement options and holds the selector securely when buttons are depressed. The suction feet are designed to work well with a variety of textures that cover the tops of other components. SpeakerCraft’s S4VC / S6VC Multi-Room Speaker Selectors with Volume Controls allow the operation of multiple pairs of speakers when using one amplifier or receiver. Once the speakers are connected to the selector, individual pairs may be turned on or off as desired using the push buttons on the front of the selector. A separate volume control for each pair allows the ability to control or limit speaker volume right at the selector. When engaged, the rear protection switch ensures safe operation, even by those unfamiliar with the system.Installation utilizing Direct Connect makes wiring the selector to your speakers quick and easy. With a simple turn of a screw, wires are solidly secured and a perfect electrical bond is created. The process is quick, simple, and eliminates the worry of wires becoming loose.Figure 1Protection SwitchArea Selector ButtonSuction FeetArea LabelVolume Control Knob

View the manual for the SpeakerCraft S6VC here, for free. This manual comes under the category Remote Controllers and has been rated by 1 people with an average of a 5.2. This manual is available in the following languages: English. Do you have a question about the SpeakerCraft S6VC or do you need help? Ask your question here

Need help?

Do you have a question about the SpeakerCraft and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other SpeakerCraft owners to provide you with a good answer.

Number of questions: 0

Remote Controller
User manual (PDF)
Built-in speaker(s)
Product colourBlack
Weight & dimensions
Depth156 mm
Height44 mm
Width432 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the SpeakerCraft S6VC below.

Is your question not listed? Ask your question here

No results