Sony Wireless Buzz! Buzzers manual

Sony Wireless Buzz! Buzzers
6.2 · 4
PDF manual
 · 1 page
English
manualSony Wireless Buzz! Buzzers
Instruction Manual
Before using this product, carefully read this manual and retain it for future reference.These Wireless Buzz!™ Buzzers are designed for use with the PlayStation
®
2 console and the PLAYSTATION
®
3 system.
Product Contents
WARNING
To avoid potential electric shock or starting a fi re, do not expose this product to rain or moisture.
Precautions
SafetyThis product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fi re, electric shock or personal injury. To ensure accident-free operation, be sure to follow these guidelines:• Observe all warnings, precautions and instructions.• Do not use the product if it functions in an abnormal manner.• This product contains small parts, which, if removed, may be a choking hazard to children.
Use and Handling
• Do not expose the product to high temperatures, high humidity or direct sunlight. • Operate in an environment where temperatures range between 5°C and 35°C.• Do not allow liquid or small particles to get into the product.• Do not put heavy objects on the product.• Never disassemble or modify the product.• Do not throw or drop the product, or physically damage it in any way.• Do not touch the product’s metal parts or insert foreign objects into its USB connector.
Cleaning the Wireless Buzz!™ Buzzers
Dust may build up on the product after an extended period of time.• Before cleaning the product, disconnect it from the PlayStation
®
2 console or the PLAYSTATION
®
3 system for safety.• Wipe the product’s surface with a soft, dry cloth.• The product should be cleaned by an adult, or cleaned under close adult supervision.• Do not use a moistened cloth to clean the product as water may cause it to malfunction.• Do not use benzene, paint thinner or other chemicals as these may damage the product.• When using a commercially available cleaning cloth, follow the instructions supplied with it.
AA Alkaline Batteries
• Do not throw the batteries into fi re.• Do not carry the batteries with coins or other metallic objects. The batteries can generate heat if their positive and negative terminals come into accidental contact with metallic objects. • Do not mix new batteries with old ones. • Do not use diff erent types of battery together.• When you are not going to use the product for a long time, remove the batteries to avoid damage from battery leakage and corrosion. • If battery leakage occurs, wipe off any deposit and install new batteries. If the deposit sticks to you, wipe it off thoroughly.
Connecting the Wireless Buzz!™ Buzzers
USB receiver • Remove the receiver cap from the USB receiver and insert its USB connector into any USB connector on the front of the PlayStation
®
2 console or the PLAYSTATION
®
3 system.• Turn on the PlayStation
®
2 console or the PLAYSTATION
®
3
system.
Wireless Buzz!™ Buzzers
• Before using a Buzz!™ Buzzer, carefully remove its battery cover and insert two AA alkaline batteries (supplied). • To turn a Buzz!™ Buzzer on, push the POWER/LOCK switch briefl y towards the POWER position. When a Buzz!™ Buzzer is activated, its blue LED indicator will fl ash rapidly eight times.• To turn a Buzz™ Buzzer off , push the POWER/LOCK switch briefl y towards the POWER position. The Buzz™ Buzzer’s blue LED indicator will fl ash slowly four times to indicate that it has turned off . NOTE: A Buzz!™ Buzzer will turn off automatically if left idle for 20 minutes.• When using a Buzz!™ Buzzer, push the POWER/LOCK switch into the LOCK position to make sure it doesn’t turn off accidentally.
GB

SLEH-00069

Pairing the Wireless Buzz!™ Buzzers
These Wireless Buzz!™ Buzzers have already been paired with the supplied USB receiver. If a replacement Buzz!™ Buzzer is introduced, all four Wireless Buzz!™ Buzzers must be paired with the USB receiver again.• Push the POWER/LOCK switch on all four Wireless Buzz!™ Buzzers into the POWER position and hold it for four seconds, until their blue LED indicators glow continuously. Be sure to perform this operation within two metres of the PlayStation
®
2 console or the PLAYSTATION®3 system.• Press and hold the BIND button on the USB receiver. Its blue LED indicator will glow and fl ash once as each Buzz!™ Buzzer successfully pairs.• As each Buzz!™ Buzzer pairs with the USB receiver, its blue LED indicator and red Buzz!™ button will fl ash briefl y, indicating a successful connection and pairing. To test the connection, press any button and the blue LED indicator on the Buzz!™ Buzzer and the USB receiver will fl ash briefl y.• The USB receiver will pair with a maximum of four Wireless Buzz!™ Buzzers. To play with fi ve to eight Wireless Buzz!™ Buzzers, a second USB receiver is required.
Using the Wireless Buzz!™ Buzzers
When turned on, ensure that the Wireless Buzz!™ Buzzers are within approximately 10 metres of the PlayStation
®
2 console or the PLAYSTATION
®
3 system. The usage and function of the product may vary depending on the software in use. See the appropriate software manual for details.
Troubleshooting
If you experience any diffi culties while using the product, please call the appropriate PlayStation
®
customer service number which can be found:– within every PlayStation
®
2 and PLAYSTATION
®
3 format software manual; and– on our website at playstation.com
Specifi cations
Interface (USB receiver and PS2™/PS3™) USB type 1.1Interface (Buzz!™ Buzzer and USB receiver) RF 2.4GHz, GFSKUSB connector (USB receiver and PS2™/PS3™) USB type 1.1USB connector (Buzz!™ Buzzer and USB receiver) RF 2.4GHz, GFSKPower consumption (USB receiver) Max. 100mA @ 5VPower consumption (Buzz!™ Buzzer) Max. 45mA @ 3VBuzz!™ Buzzer dimensions (approx.) 137 x 54 x 49mmUSB receiver dimensions (approx.) 77 x 23 x 8mm
)seirettab AA tuohtiw( g913 ).xorppa( thgiew latoT
C°53 - C°5 erutarepmet noitarepO
Next time you replace your batteries, think about purchasing Sony rechargeable batteries. Using one Cycle Energy Blue rechargeable battery is the equivalent of using 1000 disposable batteries. Save money and be environmentally conscious! Visit us at: sony-europe.com/energyThe manufacturer of this product is Namtai Electronic (Shenzhen) Co., Ltd. located at Gushu Industrial Estate, Xixiang, Baoan, Shenzhen, 518126 China. Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 7LP. Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and batteries, please dispose of them in accordance with any applicable local laws or requirements for disposal of electrical equipment/batteries. In so doing, you will help to conserve
natural resources and improve standards of environmental protection in treatment and disposal of
electrical waste.Design and specifi cations are subject to change without notice.
©2008 Sony Computer Entertainment Europe. “Buzz!” and the Buzz! logo are trademarks of Sony Computer Entertainment Europe.
2
”, “PLAYSTATION” and “PlayStation” are registered trademarks of Sony Computer Entertainment Inc. “” is a registered trademark of Sony Corporation. All rights reserved.

Wireless Buzz!

Buzzers

POWER/LOCK switchblue LED indicatorbattery cover• Four Wireless Buzz!™ Buzzers.• Eight AA alkaline batteries.• One USB receiver with receiver cap.• One drawstring bag.
11285 Wireless Buzz Buzzer GB_A5_v9.indd 1 24/4/08 15:57:21

Manual

View the manual for the Sony Wireless Buzz! Buzzers here, for free. This manual comes under the category Controllers and has been rated by 4 people with an average of a 6.2. This manual is available in the following languages: English. Do you have a question about the Sony Wireless Buzz! Buzzers or do you need help? Ask your question here

Need help?

Do you have a question about the Sony Wireless Buzz! Buzzers and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Sony Wireless Buzz! Buzzers owners to provide you with a good answer.

Number of questions: 0

Sony Wireless Buzz! Buzzers specifications

Below you will find the product specifications and the manual specifications of the Sony Wireless Buzz! Buzzers.

General
Brand Sony
Model Wireless Buzz! Buzzers | 9700128
Product Controller
EAN 711719700128
Language English
Filetype User manual (PDF)
Weight & dimensions
Weight 319 g
Other features
Dimensions (WxDxH) 137 x 54 x 49 mm
Minimum system requirements Sony PlayStation 2/PlayStation 3
Mac compatibility
Ports & interfaces
Connectivity technology Wireless
Wireless range 10 m
Input device
Device type Gamepad
Power
Battery type AA
Technical details
Quantity per box 4 pc(s)
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony Wireless Buzz! Buzzers below.

Is your question not listed? Ask your question here

No results