Name: Sony SNTEX154
Brand: Sony
SKU: 290260
Rating: 75 (1 reviews)

4-154-545-11 (1)

Video Network Station

Installation ManualBefore operating the unit, please read this manual thoroughly and retain it for future reference.

SNT-EX154

SNT-EP154

Owner’s Record

The model and serial numbers are located on the bottom of the unit. Record these numbers in the spaces provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. Serial No.

WARNING

To reduce a risk of re or electric shock, do not expose this product to rain or moisture.To avoid electrical shock, do not open the cabinet. Refer servicing to qualied personnel only. WARNINGThis installation should be made by a qualied service person and should conform to all local codes.IMPORTANTThe nameplate is located on the bottom.CAUTIONThese servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the Operating Instructions unless you are qualified to do

so.

Refer all servicing to qualified service personnel.For customers in the U.S.A.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.You are cautioned that any changes or modications not expressly approved in this manual could void your authority to operate this equipment.All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B or Part 15 of FCC Rules.For customers in CanadaThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.For the customers in EuropeThe manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan.The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelnger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.For the customers in Europe, Australia and New ZealandWARNINGThis is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.In the case that interference should occur, consult your nearest authorized Sony service facility.This apparatus shall not be used in the residential area.

Notes on Use

Before UseIf you nd condensation when you open the package, turn on the power after leaving it for about 60 minutes.Data and securityYou should keep in mind that the images or audio you are monitoring may be protected by privacy and other legal rights, and the responsibility for making sure you are complying with applicable laws is yours alone. Access to the images and audio is protected only by a user name and the password you set up. No further authentication is provided nor should you presume that any other protective ltering is done by the service. Since the service is Internet-based, there is a risk that the image or audio you are monitoring can be viewed or used by a third-party via the network.SONY IS NOT RESPONSIBLE, AND ASSUMES ABSOLUTELY NO LIABILITY TO YOU OR ANYONE ELSE, FOR SERVICE INTERRUPTIONS OR DISCONTINUATIONS OR EVEN SERVICE CANCELLATION. THE SERVICE IS PROVIDED AS-IS, AND SONY DISCLAIMS AND EXCLUDES ALL WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE SERVICE INCLUDING, BUT NOT LIMITED TO, ANY OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THAT IT WILL OPERATE ERROR-FREE OR CONTINUOUSLY.Security conguration is essential for wireless LAN. Should a problem occur without setting security, or due to the limitation of the wireless LAN specications, SONY shall not be liable for any damage, loss of recorded data or restoration thereof.Always make a test recording, and verify that it was recorded successfully. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.If you lose data by using this unit, SONY accepts no responsibility for restoration of the data.Personal informationThe images taken by the system using this device can identify individuals and thus they fall under “personal information” stipulated in the “Act on the Protection of Personal Information”. Please handle the video data appropriately according to law.Information recorded using this product may also be “personal information”. Upon disposal, transfer, repair, or any other occasion where this product or storage media is passed on to a third party, practice due care in its handling.Operating or storage locationAvoid operating or storing the camera in the following locations.Extremely hot or cold places (Operating temperature: 0 °C to +45 °C [32 °F to 113 °F])Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)Close to sources of strong magnetismClose to sources of powerful electromagnetic radiation, such as radios or TV transmittersLocations subject to strong vibration or shockVentilationTo prevent heat buildup, do not block air circulation around the unit.TransportationAlways turn o the power when carrying.When transporting the unit, repack it as originally packed at the factory or in materials of equal quality.CleaningUse a soft, dry cloth to clean the external surfaces of the unit. Stubborn stains can be removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface nishes.Please consult the store of purchase or authorized Sony dealer if there were troubles and anomalies.

About the Supplied Manuals

Installation Manual (this document)This Installation Manual describes the names and functions of parts and controls of the Video Network Station. Be sure to read the Installation Manual before operating.

Note

This product is used by installing it to the SNT-RS1U/SNT-RS3U.See the Installation Manual of the SNT-RS1U/SNT-RS3U and User’s guide of the unit for installation and use.

Location and Function of Part

Rear I/O (Input/Output) portThis device is provided with an RS-485 port, four sensor inputs and four alarm outputs.Pin No. Indication Functions

ALARM

OUT

C Common terminal for alarm output2 1 Alarm output 1 (oating)3 2 Alarm output 2 (oating)4 3 Alarm output 3 (oating)5 4 Alarm output 4 (oating)

ALARM IN /RS-4851 Alarm input 1 (GND level reference)7 2 Alarm input 2 (GND level reference)8 3 Alarm input 3 (GND level reference)9 4 Alarm input 4 (GND level reference)10 G ALARM IN/RS-485 reference GND

11 +

RS-485 (+) input/output (GND level reference)12 – RS-485 (–) input/output (GND level reference) LAN (network) port (RJ45)Connect to the 10BASE-T or 100BASE-TX network using a network cable (UTP, category 5).CAUTIONFor safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions for this port.When you connect the LAN cable of the unit to peripheral device, use a shielded-type cable to prevent malfunction due to radiation noise. (microphone input/line input) terminal (min-ijack, monaural)Connect a commercially-available microphone when using the microphone input.The plug-in power system (reference voltage 2.5 V DC) is supported. Input between microphone and line input is user-switchable. Video input terminal (BNC)Input composite video signal. (line output) terminal (minijack, monaural)Connect to a speaker with a built-in amplier.On-board  Video signal terminating resistor switchSwitches 1 to 4 respectively, corresponding to video input terminals 1 to 4.

Note

Always turn on the switch when using Coaxitron® (SNT-EX154 only). The device does not operate with the switch o.



Specications

CompressionVideo compression format JPEG/MPEG4/H.264Audio compression format G.711/G.726 (40, 32, 24, 16 kbps)Maximum frame rate 30 fpsInterfaceNetwork port 10BASE-T/100BASE-TX, auto negotiation (RJ-45)I/O port (Only SNT-EX154) Sensor input : × 4 Alarm output : × 4 (electrically isolated from the unit) Camera control interface: ×1 (RS-485)Microphone input/Line input (switchable by setting) (Only SNT-EX154) Mini-jack (monaural) Microphone input: Supports plug-in power system (reference voltage 2.5 V DC)Line output Minijack (monaural) (SNT-EX154 only)OthersPower supply 12 V DC (From SNT-RS1U/RS3U)Operating temperature 0 °C to +45 °C (32 °F to 113 °F)Storage temperature –20 °C to +60 °C (–4 °F to +140 °F)Operating humidity 20% to 80%Storage humidity 20% to 80%Dimensions  78 × 34 × 382 mm (3

× 1

× 15

inches) (w/h/d)Mass Approx. 0.4 kg (14 oz)Supplied accessories Installation Manual (this document) (1) B&P Warranty Booklet (1) I/O port connector (Only SNT-EX154) (1) Attachment screws (2)Design and specications are subject to change without notice.Recommendation of Periodic InspectionsIn case using this device over an extended period of time, please have it inspected periodically for safe use.It may appear awless, but the components may have deteriorated over time, which may cause a malfunction or accident.For details, please consult the store of purchase or an authorised Sony dealer.



2009 Sony Corporation Printed in ChinaSNT-EP154



SNT-EX154



Unit: mm (inches)SNT-EP154 SNT-EX154

)

382

(15

)



Need help?

Number of questions: 0

Do you have a question about the Sony SNTEX154 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Sony SNTEX154 owners to properly answer your question.

About the Sony SNTEX154

View the manual for the Sony SNTEX154 here, for free. This manual comes under the category Servers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Sony SNTEX154 or do you need help? Ask your question here