Sony SmartBand 2 SWR12 manual

Sony SmartBand 2 SWR12
5.5 · 2
PDF manual
 · 23 pages
English
manualSony SmartBand 2 SWR12
To log in to the Lifelog application
1
From the main application screen of your Android™ device, find and tap
Lifelog.
2
Follow the instructions that appear on the screen and accept the terms and
conditions.

Adjusting the stride length for walking and running

The Lifelog application uses the number of steps you have taken and your stride
length to calculate the distance you have walked or run. The automatic stride length
used by default is based on your gender and height. If you feel that the distances
measured by the Lifelog application are not accurate enough, you can adjust your
stride length.
To adjust the stride length for walking
1
From the main application screen of your Android™ device, find and tap
Lifelog.
2
Tap
> Settings > Profile.
3
Find and tap Stride length.
4
Unmark the Automatic checkbox if it is marked, then scroll up or down to
adjust the setting and tap SET.
To adjust the stride length for running
1
From the main application screen of your Android™ device, find and tap
Lifelog.
2
Tap
> Settings > Profile.
3
Find and tap Running stride length.
4
Unmark the Automatic checkbox if it is marked, then scroll up or down to
adjust the setting and tap SET.

Activity box overview

1 View the amount of active calories that you have burned while exercising and the passive calories
that you have burned while not exercising
2 View your sleep hours and check the quality of your sleep based on the information collected
3 View the number of steps you have taken and logged in the Lifelog application
4 View the total time you have spent riding a bicycle for longer than just a few steps
5 View the total time you have spent walking for longer than just a few steps
6 View the total time you have spent taking transportation for longer than just a few steps
7 View the history of your pulse and stress and recovery levels logged in the Lifelog application
8 View the time you have spent using communication applications from Google Play™ and select
applications such as the Phone and the Messaging applications from Sony
9 View the total time you have spent running with a high steps-per-minute ratio for longer than just a
few steps
17
This is an internet version of this publication. © Print only for private use.

View the manual for the Sony SmartBand 2 SWR12 here, for free. This manual comes under the category smartwatch and has been rated by 2 people with an average of a 5.5. This manual is available in the following languages: English. Do you have a question about the Sony SmartBand 2 SWR12 or do you need help? Ask your question here

Need help?

Do you have a question about the Sony and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Sony SmartBand 2 SWR12 is a wearable device designed to track your fitness and activity levels. It features an accelerometer and heart rate monitor to monitor your movements and heart rate. The durable silicone band is comfortable to wear and adjustable to fit most wrist sizes. The device is waterproof, making it suitable for use during exercise or in the shower. The Sony SmartBand 2 SWR12 syncs with your smartphone via Bluetooth, allowing you to receive notifications, control music playback, and more. The battery life lasts up to 5 days on a single charge, depending on usage. The device tracks your steps taken, distance traveled, calories burned, and sleep quality. The data can be viewed on the accompanying app, which provides insight and analysis of your activity patterns. The Sony SmartBand 2 SWR12 is compatible with both Android and iOS devices, and can be customized with different band colors and designs. It is a versatile device that can help you stay on top of your fitness goals and improve your overall health and wellbeing.

General
BrandSony
ModelSmartBand 2 SWR12
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony SmartBand 2 SWR12 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I connect the Sony SmartBand 2 SWR12 to my Android device?

To connect your Sony SmartBand 2 SWR12 to your Android device, follow these steps: 1. Ensure that your SmartBand 2 is fully charged. 2. Make sure that you have installed or updated the SmartBand 2 application on your Android device to the latest version. 3. Turn on your SmartBand 2. 4. On your Android device, enable the Bluetooth function and scan for Bluetooth devices. 5. Select "SWR12" from the list of available devices. 6. Follow the instructions that appear on the screen. 7. Once connected, you will see the SmartBand 2 icon briefly in the status bar and permanently in the Notification panel. 8. You can access the SmartBand 2 application and the Lifelog application by dragging down the status bar and opening the Notification panel. If the connection is lost, your SmartBand 2 will vibrate three times if the out-of-range alert is turned on. It will automatically attempt to reconnect. If the auto-reconnection fails, you can manually force the accessory to try reconnecting by briefly pressing the power key or use NFC to reconnect the two devices. To perform a factory reset or unpair your SmartBand 2, please refer to the manual for detailed instructions.

Why is the SmartBand 2 not counting my steps accurately?

There could be several reasons why the Sony SmartBand 2 SWR12 is not counting your steps accurately. Here are some possible solutions: 1. Adjust stride length: The SmartBand 2 uses your stride length to calculate the distance you have walked or run. If you feel that the distances measured are not accurate, you can adjust your stride length. Open the Lifelog application on your Android device, go to Settings > Profile, and find the option to adjust stride length for walking and running. Make sure the automatic checkbox is unchecked and adjust the setting accordingly. 2. Ensure proper placement: Make sure that you are wearing the SmartBand 2 snugly but comfortably on your wrist. If it does not stay in place and the step count is affected, tighten the wristband. 3. Clean the SmartBand 2: After exercising or heavy sweating, it is recommended to clean the SmartBand 2, especially the heart rate sensor, as sweat or dirt can affect its accuracy. 4. Regular firmware updates: Check for firmware updates for your SmartBand 2 and make sure you have the latest version installed. Firmware updates can improve the accuracy of step counting. If the issue persists after trying these steps, you may need to contact Sony customer support for further assistance.

How do I track my sleep using the SmartBand 2?

To track your sleep using the Sony SmartBand 2 SWR12, follow these steps: 1. Make sure that your SmartBand 2 is connected to your Android device and that you have the Lifelog application installed. 2. Wear the SmartBand 2 on your wrist before going to bed. 3. The SmartBand 2 will automatically detect when you fall asleep and start tracking your sleep. 4. In the Lifelog application on your Android device, open the app and navigate to the timeline. 5. Swipe left or right on the timeline to find the logged sleeping activity. 6. Tap on the sleeping activity animation to view more details about your sleep. 7. The Lifelog application will display information such as the duration of your sleep, the time you fell asleep, and the time you woke up. 8. You can also view additional sleep details, such as the time spent in different sleep stages (light sleep, deep sleep, etc.), by tapping on the sleep activity. 9. To delete a sleeping activity, swipe left or right on the timeline to find the logged sleeping activity you want to delete. Tap the sleeping activity animation, then tap "DELETE." By following these steps, you can track and monitor your sleep using the Sony SmartBand 2 SWR12 and the Lifelog application on your Android device.

What should I do if the notification lights on the SmartBand 2 are not working?

If the notification lights on your Sony SmartBand 2 SWR12 are not working, you can try the following steps: 1. Check the power: Ensure that your SmartBand 2 has sufficient battery power. If the battery is low, charge it using the provided USB cable and a power source. 2. Restart the SmartBand 2: Sometimes, a simple restart can resolve issues with the notification lights. Press and hold the power key until the SmartBand 2 vibrates and the lights turn off. Then, press and hold the power key again to turn it back on. 3. Check the settings: Open the SmartBand 2 application on your Android device and navigate to the settings. Make sure that the notification lights are enabled and properly configured according to your preferences. 4. Update the firmware: Ensure that your SmartBand 2 has the latest firmware installed. Check for firmware updates in the SmartBand 2 application and follow the instructions to update if available. 5. Reset the SmartBand 2: If the above steps do not resolve the issue, you can try resetting the SmartBand 2 to its factory settings. Refer to the manual for instructions on how to perform a factory reset. If the problem persists, it is recommended to contact Sony customer support for further assistance.

Why is the heart rate sensor on the SmartBand 2 not providing accurate readings?

If the heart rate sensor on your Sony SmartBand 2 SWR12 is not providing accurate readings, you can try the following steps: 1. Ensure proper placement: Make sure that you are wearing the SmartBand 2 correctly on your wrist. It should be snug but comfortable, with the heart rate sensor in direct contact with your skin. Adjust the position if necessary. 2. Clean the sensor and your skin: Sweat, dirt, or moisture can affect the accuracy of the heart rate sensor. Clean the sensor and your skin before using the SmartBand 2. Use a soft, dry cloth to wipe the sensor and ensure that your skin is clean and dry. 3. Avoid movement interference: Excessive movement or shaking of the SmartBand 2 can interfere with the heart rate sensor's accuracy. Keep your wrist steady and avoid unnecessary movement while measuring your heart rate. 4. Check for firmware updates: Ensure that your SmartBand 2 has the latest firmware installed. Check for firmware updates in the SmartBand 2 application and follow the instructions to update if available. Firmware updates can improve the performance and accuracy of the heart rate sensor. 5. Contact Sony customer support: If the issue persists after trying the above steps, it is recommended to contact Sony customer support for further assistance and troubleshooting. By following these steps, you can improve the accuracy of the heart rate sensor on your Sony SmartBand 2 SWR12.

Is the manual of the Sony SmartBand 2 SWR12 available in English?

Yes, the manual of the Sony SmartBand 2 SWR12 is available in English .

Is your question not listed? Ask your question here

No results