When you select AUTO ON in the INPUT SENSING menu, the
monitor automatically detects an input signal to an input terminal,
and changes the input automatically before the monitor goes into
the power saving mode.
1Press the MENU button.
The main menu appears on the screen.
2Press the m/M buttons to select (INPUT
SENSING) and press the OK button.
The INPUT SENSING menu appears on the screen.
3Press the m/M buttons to select the desired mode
and press the OK button.
•AUTO ON:When the selected input terminal has no
input signal, or when you select an input
terminal by the INPUT button on the
monitor and the terminal has no input
signal, the on-screen message appears
(page17) and the monitor checks the input
signal to another input terminal
automatically to change the input.
When the input is changed, the selected
input terminal is displayed on the left upper
of the screen.
When there is no input signal, the monitor
goes into the power saving mode
automatically.
•AUTO OFF:The input is not changed automatically.
Press the INPUT button to change the
input.
Selecting the on-screen menu
language (LANGUAGE)
You can change the language used on menus or messages
displayed on this monitor.
1 Press the MENU button.
The main menu appears on the screen.
2Keep pressing the m button until the icon of the
desired option item appears.
3Press the m/M buttons to select (LANGUAGE)
and press the OK button.
The LANGUAGE menu appears on the screen.
4Press the m/M buttons to select a language and
press the OK button.
•ENGLISH
•FRANÇAIS: French
•DEUTSCH: German
•ESPAÑOL: Spanish
•ITALIANO: Italian
•NEDERLANDS: Dutch
•SVENSKA: Swedish
•: Russian
•: Japanese
•: Chinese
Additional settings
You can adjust the following options:
•RESET 0
•MENU LOCK
1 Press the MENU button.
The main menu appears on the screen.
2Keep pressing the m button until the icon of the
desired option item appears.
3Press the m/M buttons to select the desired option
item and press the OK button.
Adjust the selected option item according to the following
instructions.
x
Resetting the adjustment data to the defaults
You can reset the adjustments to the default settings.
1Press the m/M buttons to select 0 (RESET) and
press the OK button.
The RESET menu appears on the screen.
2Press the m/M buttons to select the desired mode
and press the OK button.
•OK:To reset all of the adjustment data to the default
settings. Note that the (LANGUAGE) setting is
not reset by this method.
•CANCEL:To cancel resetting and return to the menu
screen.
Manual
View the manual for the Sony SDM-976D here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Sony SDM-976D or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony SDM-976D below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Sony SDM-976D available in English?
Yes, the manual of the Sony SDM-976D is available in English .
Need help?
Do you have a question about the Sony and is the answer not in the manual?
Question and answer
Number of questions: 0