Press the MENU button to display the main menu on your
screen.
2 Select the menu you want to adjust.
Press the m/M buttons to display the desired menu. Press the
OK button to select the menu item.
3 Adjust the menu.
Press the m/M buttons to make the adjustment, then press the
OK button.
When you press the OK button, the setting is stored, then the
display returns to the previous menu.
4 Close the menu.
Press the MENU button once to return to normal viewing. If
no buttons are pressed, the menu closes automatically after
about 45 seconds.
x Resetting the adjustments
You can reset the adjustments using the RESET menu. See
page 14 for more information on resetting the adjustments.
x Controlling the monitor by computer
Press the MENU button down for at least 5 seconds. You will see
an on-screen message indicating the current setting. After 3
seconds the DDC/CI setting is switched on or off, as shown
below.
Note
This function applies only to computers that support the DDC/CI
(Display Data Channel Command Interface) function.
Adjusting the backlight
(BACKLIGHT)
If the screen is too bright, adjust the backlight and make the screen
easier to see.
1 Press the MENU button.
The main menu appears on the screen.
2Press the m/M buttons to select (BACKLIGHT)
and press the OK button.
The BACKLIGHT menu appears on the screen.
3Press the m/M buttons to adjust the light level and
press the OK button.
Adjusting the contrast
(CONTRAST)
Adjust the picture contrast.
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1 Press the MENU button.
The main menu appears on the screen.
2Press the m/M buttons to select 6 (CONTRAST) and
press the OK button.
The CONTRAST menu appears on the screen.
3Press the m/M buttons to adjust the contrast and
press the OK button.
qaOther menus (page 14)
Set the following menu
items.
•RESET 0
•MENU LOCK
1280102460Hzx/
EXIT
OK
CANCEL
RESET
MENU
OK / INPUT
,
,
OK / INPUT
MENU
On-screen messages
(Appear for a while)
DDC-CI : ON
(default setting)
Allows the computer to control
menu settings.
DDC-CI : OFFDoes not allow the computer to
control menu settings.
Manual
View the manual for the Sony SDM-976D here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Sony SDM-976D or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony SDM-976D below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Sony SDM-976D available in English?
Yes, the manual of the Sony SDM-976D is available in English .
Need help?
Do you have a question about the Sony and is the answer not in the manual?
Question and answer
Number of questions: 0