Tramite il menu a schermo è possibile effettuare numerose
regolazioni.
Modalità di spostamento all’interno
del menu
Per visualizzare il menu principale, premere il tasto MENU.
Vedere a pagina 10 per ulteriori informazioni sull’utilizzo del
tasto MENU.
Utilizzare i tasti m/M e OK per selezionare le icone raffigurate
nell’illustrazione del menu principale riportata sopra. Vengono
visualizzati i seguenti menu da 1 a 0. Tenere premuto m per
scorrere verso il basso fino a visualizzare le icone dei menu da 9
a 0. Vedere pagina10 per ulteriori informazioni sull’utilizzo dei
tasti m/M e OK.
Prima di procedere alle regolazioni
Collegare il monitor e il computer, quindi accenderli.
Per ottenere i migliori risultati, attendere almeno 30 minuti
prima di effettuare le regolazioni.
1RETROILLUMINAZ
(pagina 10)
Selezionare il menu
RETROILLUMINAZ per
regolare la luminosità della
retroilluminazione.
2CONTRASTO 6
(pagina 11)
Selezionare il menu
CONTRASTO per regolare
il contrasto dell’immagine.
MENU
,
100
1280102460Hzx/
EXIT
RETROILLUMINAZ
100
1280102460Hzx/
EXIT
RETROILLUMINAZ
100
1280102460Hzx/
EXIT
CONTRASTO
3LUMINOSITÀ 8
(pagina 11)
Selezionare il menu
LUMINOSITÀ per regolare
la luminosità dell’immagine
(livello del nero).
4SCHERMO
(pagina 11)
Selezionare il menu
SCHERMO per regolare la
nitidezza (fase/pixel) o la
centratura (posizione
orizzontale/verticale)
dell’immagine.
5COLORE (pagina13)
Selezionare il menu
COLORE per regolare la
temperatura di colore
dell’immagine. Tramite
questo menu viene regolato il
tono dello schermo. Se
COLORE è impostato su
sRGB, non è possibile
regolare CONTRASTO,
LUMINOSITÀ o GAMMA.
6GAMMA (pagina14)
Selezionare il menu
GAMMA per modificare
l’impostazione della tonalità
di colore dell’immagine.
7NITIDEZZA
(pagina 14)
Selezionare il menu
NITIDEZZA per regolare la
nitidezza dei contorni delle
immagini.
8POSIZIONE MENU
(pagina 14)
Selezionare il menu
POSIZIONE MENU per
modificare la posizione del
menu a schermo.
100
1280102460Hzx/
EXIT
LUMINOSITÀ
1280102460Hzx/
EXIT
REGOLAZ AUTOM
FASE
PIXEL
CENTRO ORIZ
CENTRO VERT
SCHERMO
1280102460Hzx/
EXIT
9300K
6500K
sRGB
UTENTE
REGOLAZIONI
COLORE
1280102460Hzx/
EXIT
GAMMA1
GAMMA2
GAMMA3
GAMMA
1280102460Hzx/
EXIT
5
NITIDEZZA
1280102460Hzx/
EXIT
POSIZIONE MENU
Manual
View the manual for the Sony SDM-976D here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Sony SDM-976D or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Sony SDM-976D below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
Is the manual of the Sony SDM-976D available in English?
Yes, the manual of the Sony SDM-976D is available in English .
Need help?
Do you have a question about the Sony and is the answer not in the manual?
Question and answer
Number of questions: 0